go top 返回词典
• Using the curve fitting method, the test results are quantified. The shear rigidity of two specimens is gained.

利用曲线拟合方法试验数据进行了量化，得到了组试件抗剪刚度

youdao

• The Mathematical model of errors of capacitive gate transducers is established and the changing rule determined in accordance with measured data, and the curve fitting method.

基于实测数据采用曲线拟合方法，建立传感器误差数学模型确定变化规律

youdao

• Methods the measurable range was broadened through: Lowering of the specific radioactivity of the labelled antigen, increasing the concentration of the anti-serum and improve the curve fitting method.

方法通过降低标记抗原放射性提高血清浓度改进曲线拟合方式等方法，扩大测定范围

youdao

• On the basis of Chebyshev curve fitting method, a new method to design worn profile tread is proposed by this paper.

本文切比雪曲线拟合方法基础上，提出了一种高次曲线磨耗面的设计方法。

youdao

• An example calculated shows that this method is even more simple, convenient and reliable than the traditional curve fitting method.

实例计算表明方法传统曲线拟合方法更为简便可靠

youdao

• Represents a new kind of generalized extended interpolation method to realize the high precision fitting of characteristic curve of fan.

提出采用种新的广义拓逼近实现煤矿通风机高精度特性曲线拟合

youdao

• A speedy match of angular distance method was formulated by curve fitting the table of star pair for realizing rapid match in star pair information catalogue.

为了实现对星对信息快速查找，提出一种将星对信息表拟合成曲线函数实现快速匹配方法

youdao

• Conparing with the conventional curve fitting, this method is simpler, the matched curve could be obtained by only giving the data points and the acceptable error.

传统曲线拟合方法相比，方法只需给定数据允许误差即可得到匹配曲线方程。

youdao

• Based on the idea of curve fitting this paper proposes a new method for calculating the balancer in partial inertia force balancing of planar linkage mechanisms.

本文根据曲线拟合思想提出一种解决平面机构惯性力部分平衡配重计算方法

youdao

• Thirdly, the feature point set is filtered by the rule and two-step curve fitting method is used to obtain the dental arch form.

然后基于规则筛选出关键特征通过两步最小二乘法拟合弓线。

youdao

• The method to generate a stochastic excitation signal by curve fitting with random digitals is proposed.

阐述了随机数据点拟合出平滑的数据序列的随机激励信号生成方法

youdao

• In this dissertation fitting method is used in forming the basic magnetization curve of the iron core.

本文铁心基本磁化曲线采用拟合方法

youdao

• Some curve surface fitting methods used in the reverse engineering are analyzed, and a new free curve surface fitting method based on ANN is presented.

分析了应用反求工程几种曲面方法提出一种基于神经网络技术自由曲面拟合方法

youdao

• Further, the least square method has been applied to get linear curve fitting and the SDL7432 linear measurement curve has been given.

利用最小二乘法测量数据进行线性曲线拟合得出了SDL7432线性测量曲线。

youdao

• The paper, through analyzing the forming of the amplitude spectrum of the echo, proposed a new method using quadratic curve fitting for it.

本文针对这种情况，连续波雷达回波频谱幅度产生原因进行分析，提出二次曲线拟合频谱幅度估计加速度的方法

youdao

• Then, using curve fitting and optimization method, the linear model, hysteresis model and variable linear model of pressure-torque relations are developed based on test data.

其次获得大量试验数据基础运用曲线拟合优化技术，建立制动压力-力矩关系线性模型迟滞模型和可变线性模型。

youdao

• The method of using cubic spline function as fan characteristic curve fitting is introduced.

介绍了三次样条函数通风机性能曲线方法

youdao

• The parameter estimation achieved by this method is not unbiased. The precision of curve fitting is low.

这种方法进行的参数估计不是无偏估计量，因此其非线性拟合精度较低。

youdao

• This Paper has theoretically analysed curve fitting method of problem to solve trajectory for tank fire control systems, and has described some characteristics which the method possessed.

本文坦克火控系统弹道问题中的曲线合法进行了一定的理论分析，指出了方法所具有的某些特性

youdao

• The method of using cubic spline function as fan characteristic curve fitting is introduced. The calculating example is provided and description is made for the specific problem.

介绍了三次样条函数通风机性能曲线方法列出了计算实例，并具体问题做了说明

youdao

• By using the method of curve fitting to calculate the traction tonnage, we can gain the traction tonnage within short time and short distance after the locomotive start.

牵引吨位计算采用曲线合的计算方法能够列车起动最短的时间、运行最短距离计算出牵引吨位。

youdao

• This article introduces the MATLAB curve fitting toolbox, and provides a special application method through the test data processing of Automobile surface modeling.

介绍MATLAB曲线拟合工具箱通过汽车覆盖件曲面造型测试数据处理给出了具体应用方法

youdao

• Conclusion the polynomial fitting curve is the perfect linear evaluation method. It guarantees both the accuracy and reliability of the experimental results, and is more suitable to clinic.

结论多项式拟合曲线较为理想线性评价方法保证实验结果准确性可靠性而且适用于临床。

youdao

• The factors of MOS transistor in the saturation region are analyzed, the mismatch models are optimized, and the model parameter extraction is done by least squares curve fitting method.

通过分析MOS饱和因素优化MOS管失配模型，提出最小二乘曲线合法进行相关模型参数提取

youdao

• Paper has used rotated cubic arc for fiffing a curve and has showed the method of curve-fitting with fitting flexuose direction of curve.

单拐曲线曲线填充，给出一个符合指定弯曲方向填充方法

youdao

• Paper has used rotated cubic arc for fiffing a curve and has showed the method of curve-fitting with fitting flexuose direction of curve.

单拐曲线曲线填充，给出一个符合指定弯曲方向填充方法

youdao

\$firstVoiceSent
- 来自原声例句