Material: Inter galvanized steel strip, outer PVC Coated.
材质：内部镀锌钢带，嵌棉线，外层聚氯乙烯。
Test of cold rolling welded ferritic stainless steel strip was carried out.
对铁素体不锈钢带焊接冷轧技术进行了试验研究。
Give qualitative two means to take account of standard for steel strip and welded steel pipe.
在全面考虑钢带和焊管标准的基础上，提出解决钢带判定的两种方法。
If width of the stainless steel strip is not controlled during rolling, the edges must be trimmed.
如果不锈钢的宽度在轧制时没有得到很好的控制，就必须进行修边处理。
Imported high magneto-conductivity steel strip, fine effectiveness for both low and high frequency.
进口高导磁钢带，低、高频屏效果均优。
In a hot steel strip production line, the coiling temperature control is critical for strip quality.
在热轧带钢生产线上，卷取温度的精确控制对带钢质量是至关重要的。
Nickel coatings on the steel strip are cathodal coatings, and the hole erode is the main erosion mode.
钢带上的镍涂层属阴极性涂层，孔蚀是腐蚀的主要形式。
Sample tube has a 200W chrome steel strip heater and a hinged cover to maintain even heat distribution.
样品管下端有一个200W铬钢加热棒和铰链来进行样品加热和热扩散分部。
Laser flatness gauge is widely used in on-line measurement of the steel strip shape in hot rolling progress.
激光平坦度仪广泛应用于热轧带钢平坦度在线检测与控制。
The characteristic of the edge defect in steel strip is analyzed and the image moving fuzzy is pre-processed.
本文分析带钢表面边缘缺陷的特征，对图象的运动模糊进行了预处理。
The most important question of endless welding is how to make two steel strip connected together in high speed.
无头轧制中的关键问题是钢坯的连接技术问题，即要在非常短的时间内将高速运动的钢坯连接起来。
The shearing machine is one of the most popular single unit equipment in the production of cold rolled steel strip.
剪切机是冷轧带钢生产中使用最广泛的单机设备之一。
This blade are made of Swedish precision steel strip and technology. It suit for various gravure and flexo printing.
刮墨刀采用瑞典精密钢带、工艺制造，适合各种凹版、柔性版涂布上光。
It introduces the hardware and software design of control system in X-ray thickness gauge used in cold-rolled steel strip.
介绍了一种X射线冷轧测厚仪控制系统的硬件设计和软件设计。
This paper presents research results on quality analysis, microstructure and properties of copper coated steel strip (CCSS).
对双层卷焊钢管用镀铜钢带质量与组织性能进行了全面分析研究。
The practice shows that the design in correct, the machine functions normally and the quality of steel strip coil is excellent.
生产实践表明，该机组设计正确，运转正常，板卷质量优良。
If the phenomenon of unequal height appears, the steel strip with big area must be added to the bottom of cabinet to compensate.
若出现高度不等现象，应尽可能用大面积的带或铁条在柜底加衬，以进行补偿。
Additional components such as alloy sheet steel strip covers are available to protect the linear guidance systems and drive unit.
额外的元件，如合金板材带钢可覆盖以保护线性制导系统和驱动装置。
The morphology of the surface defects of cold rolled stainless steel strip aud the cause of formation of them have been reported.
本文阐述了不锈冷轧带钢表面缺陷的形貌及其成因，并根据形貌及产生原因归纳成六种表面缺陷。
The key technique of hot rolling low carbon ultra-fine grained steel strip consists in controlled rolling and controlled cooling.
细晶粒低碳钢生产的关键技术在于控轧控冷。
Through degrease disposing, 98% of greasy impurity and 95% of iron impurity attached on the surface of steel strip can be removed.
带钢经脱脂处理其表面油杂质去除率达98%、铁杂质去除率达95%。
Steel strip of aluminum base is a kind of ideal material for automobile engine which is still produced by block-type method in China.
铝基钢带是一种理想的汽车发动机轴瓦材料，目前我国仍采用块式法生产。
The thickness and breadth of the steel strip is determined according to different pipe diameter and ring stiffness class requirements.
加强钢带的厚度与宽度根据管材直径、环刚度要求不同而分别设计确定。
In this paper, the influencing factor of Continuous Annealing on the surface quality of cold rolled silicon steel strip is introduced.
本文介绍了连续脱碳退火机组对冷轧硅钢板带表面质量的影响因素，提出了连续脱碳退火机组提高冷轧板带质量的措施。
Effect of aluminium coating process on the structure and properties of aluminized steel strip was studied using metallographic technique.
应用金相技术研究了热镀铝工艺对镀铝钢带组织和性能的影响。
In this paper, the author discusses the technical method of winding the zinc-plating steel strip in constant speed controlled by computer.
提出了采用计算机控制实现镀锌钢带以恒定速度卷绕的技术方法。
This paper describes the effective solution of difficulties encountered in the steel strip production by adopting test-ways of modern physics.
本文介绍了利用现代物理测试手段，十分有效地解决了带钢生产中发生的一系列难题。
Through adjusting the composition and optimizing process, low carbon steel strip for cold rolling has been developed successfully in CSP line.
介绍了包钢CSP厂通过成分调整和工艺优化，研究出适合冷轧生产的热轧低碳钢带生产工艺。
Therefore, the mathematic expression of deformation resistance of 304 stainless steel strip continuous casting was obtained according to the model built.
因此，根据建立的计算模型得到了薄带连铸304不锈钢的变形抗力数学表达式。
Experimental result by low-melting point alloy on the electromagnetic damming for the melt puddle of twin roll steel strip continuous casting is reported.
报道双辊薄带钢铸轧熔池电磁侧封低熔点合金模拟试验研究结果。
应用推荐