To adjust the setting of the valve, loosen locking cap screw with hex wrench, see Figure 3.
如果要调节阀门的设置，则利用六角扳手松开锁紧帽螺丝，参阅图3。
Tapping is the process of cutting a thread inside a hole so that a cap screw or bolt may be threaded into it.
攻丝是在一个孔中车出螺纹，以便装上有帽螺钉或螺栓。
This means that the 7/16" cap screw is secured down until the movement of the stem is restricted. check the clearance between the frame and the steering stem."
干这意味着，7 / 16“螺丝帽下的担保，直至运动受到限制。检查干间隙的框架和指导。
When it came to IPMP (associated with “green pea” and “earthy” flavours) the level increased by 2-3% for natural cork, but fell by 7% for screw cap and 19% for synthetic cork.
至于产生嫩豌豆味或者土味的IPMP含量，螺旋盖子和合成软木塞分别下降了7%和19%，天然软木塞却增加了2-3%。
In wines stored in bottles, the levels of IBMP (which produces a characteristic "sweet pepper" taste) did not fall as much: by 37% for synthetic cork, 36% for screw cap and 31% for natural cork.
而对于瓶装葡萄酒，产生甜辣椒味的IBMP含量没像利乐包装葡萄酒那样下降很多：合成软木塞下降37%，螺旋盖子36%，和天然软木塞31%。
NOTE: If minor leakage occurs, remove lock screw, lock washer and cap and lightly tighten packing gland nut.
注：如果出现少量的泄漏，则拆卸锁紧螺丝，然后锁住垫圈和阀盖，然后轻轻紧固填料压紧螺母。
When it came to IPMP (associated with "green pea" and "earthy" flavours) the level increased by 2-3% for natural cork, but fell by 7% for screw cap and 19% for synthetic cork.
至于产生嫩豌豆味或者土味的IPMP含量，螺旋盖子和合成软木塞分别下降了7%和19%，天然软木塞却增加了2-3%。
The screw cap keeps the wine in optimal conditions, avoiding the contact with oxygen.
全新的旋帽瓶盖，可以使酒保持在最佳的年轻状态，避免与氧气接触。
The packaging assembling line can automatically unscramble bottle, count and fill medicine, insert paper, screw cap, induction foil seal, label, print code and cartoner.
片剂、胶囊数粒瓶装包装线具有自动理瓶、计量灌装、塞纸、旋盖、铝箔封口、贴标、打码及装盒等功能。
Over in Europe, it's acceptable to buy a bottle of wine and have a screw cap on it.
在欧洲，这是可以接受的购买一瓶酒，并有一个螺丝帽上。
High-speed tube filling and sealing machine, sticker screw cap machine, cartoning machine, warehousing logistics equipment and relevant form a complete set of production line of high-tech enterprises.
高速软管灌装封尾机、贴膜拧帽机、装盒机、仓储物流设备及相应配套生产线的高科技企业。
Unscrew the Allen screw in the middle of valve cap and lift up the cap just enough to pick up the old diaphragm.
旋松阀帽中间的内六角螺丝，并且提起阀帽，正好足够拿走旧阀膜。
Remove sealing cap from the discharge valve. When using discharge tube, please?screw it onto the outlet of valve, and tighten it.
旋下排液阀的盖子。如使用弯管，请将其套在阀门放料口的外螺纹上，并用手拧紧；
Screw cap torque stepless adjustable, with constant torque rotary sealing plastic lid function, without injury cover, tight and reliable seal.
拧盖力矩无级可调，具有恒力矩旋封塑盖功能，且不伤盖，封口严密可靠。
The aerator only made of three major parts of pottery aerator aerate screw and cap is simple in structure and of easy assembly. there is a very small sealed area.
结构简单、组装方便。整个曝气器仅由陶瓷曝气头、通气螺杆、螺帽三个主要部分组成，密封部位面积极小。
Remove the screw attaching the front of the end cap to the underside of the quarter panel.
拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。
The fire pump jointer of the utility model comprises an iron screw cap, a copper ring, and an iron body pump.
本实用新型解决了目前消防水泵接合器中铁螺旋盖和铁制体泵接口处的铜圈容易被盗窃的问题。
A small, flexible cylindrical container sealed at one end and having a screw cap at the other, for pigments, toothpaste, or other pastelike substances.
小软管：可弯曲的圆柱形小容器，一头密封，另一头带螺旋盖，用于装入颜料、牙膏等膏状物质。
The screw cap is already in place at the top of the tube and the lower end is open for the filling procedure.
螺丝盖子已经在管筒的顶部安装到位，管筒的下端开口以便于填装过程。
The locking screw (17) and an end (18) are pressed on the arm plate (2) of the support frame by a cap (19).
该锁紧螺钉（17）和端头（18）通过帽（19）压在支架的臂板（2）上。
The end surface of the positioning screw cap of the equalizing axle is matched with an equalizing axle shell or the end surface of a swing arm.
平衡轴定位螺盖的端面与平衡轴壳或者摆臂的端面相配合。
Use magnetic torque type capping heads, automatic grasping cover, screw cap, immutability torque capping function.
采用磁力扭矩式封盖头，自动抓盖、拧盖，有恒力矩封盖功能。
The aerator, only made of three major parts of pottery aerator, aerate screw and cap is simple in structure and of easy assembly. There is a very small sealed area.
整个曝气器仅由陶瓷曝气头、通气螺杆、螺帽三个主要部分组成，密封部位面积极小。
The forming character of screw cap is analyzed, and screw cap injection mold is designed.
分析了螺盖的结构特点，介绍了螺盖注塑模的结构和工作过程。
Just a few spare parts shall be replaced by the user. In addition, the machine shall also seal aluminum security plug, three screw cap and crown cap.
用户只需更换极少零部件，还可实现对铝质防盗盖、三旋盖、皇冠盖的封口。
The forming character of screw cap is analyzed, and screw cap injection mold is designed.
分析了螺纹盖的成型特点，设计了螺纹盖注射模具。
This paper carried out an elastic - plastic finite element analysis on the petal basket - like screw cap used in many pipe support - hang systems.
对电厂管道支吊架系统中的花蓝螺丝进行了弹塑性有限元分析。
This is done through a plastic screw cap on the top of the electrolyser cap (shown clearly in the first photograph).
这是通过一对电解槽盖在第一张照片显示清楚(顶塑料螺帽)。
Install the screw attaching the front of the end cap to the underside of the quarter panel.
拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。
Install the screw attaching the front of the end cap to the underside of the quarter panel.
拉下舵手室外套，拆去连接末端端盖到前挡泥板的螺栓。
应用推荐