Figures 2 and 3 were created using a simple simulation program that models both synchronous and asynchronous API cases, respectively.
图2和图3是使用一个简单的模拟程序创建的，它分别模拟同步和异步api用例。
Even before the first concrete is cast, PlanIT Valley has already been built-in a simulation program that also allows detailed planning of the construction.
甚至在首块混凝土浇灌前，PlanIT Valley就已在一个模拟程序里动工了，该程序可详细规划该城建设。
The performance optimization of planetary fluid dynamics numerical simulation program on thousands cores is investigated by the experiments on 100TFlops-scale supercomputer, DeepComp 7000.
基于百万亿次超级计算机深腾7000，对行星流体动力学数值模拟程序的性能优化进行了研究。
The design of cycle simulation program adopts integrated module method.
循环模拟程序的设计采用组合式模块化方法。
The first simulation program to generate a group of children in a circle.
程序首先模拟生成一群孩子围成圆圈。
This simulation program is believed to provide an effective tool for mold designers.
从而为模具设计人员提供了一种直观、有效的参考工具。
A computer simulation program includes algorithms that are derived from those equations.
一个计算机模拟程序包含了那些方程所派生出来的算法。
The simulation program is written with FORTRAN on the base of the spherical molecular model.
模拟程序是在球形分子模型的基础上运用Fortran语言编写的。
Using the banker 's algorithm, write and debug a simple dynamic simulation program to allocate resources.
使用银行家算法，编写和调试一个系统动态分配资源的简单模拟程序。
The general formulation is deduced, by which the simulation program for VASS NMR powder pattern is set up.
推导出普适公式，并据此建立VASSNMR粉末谱型的拟谱程序。
The MATLAB simulation program is coded to estimate the parametrically excited stability of the composite beams.
然后，编制MATLAB数值模拟程序，研究两种复合梁的参激稳定性。
Applying the numerical simulation program ANSYS to analyze the stability of pillar, it proved pillar is stable.
运用ANSYS程序对煤柱的稳定性进行了数值模拟，验证了煤柱的稳定性。
A block diagram of the computer simulation program is given. The program is run successfully on IBM-PC computers.
给出了具体计算公式，利用这些公式完全可以在微机上进行计算机模拟电子自旋共振谱。
Described in this paper is a computer simulation program for the partial response technique in digital communications.
本文主要描述一个数字通信中部分响应技术的计算机模拟程序。
In comparison with the previous edition of simulation program, this edition of program has several aspects of improvement as follows.
与上一版模拟程序相比，该版程序主要在以下几个方面进行了改进。
This paper briefly describes SP and it's implementation, and illustrates the use of the language through a simulation program written in SP.
本文介绍了SP语言及其实现方法，并结合一个用SP语言编写的模拟程序说明该语言的使用。
Use a structured high-level language describes tectonic division, prepare dynamic partitioning algorithm and recovery algorithm simulation program.
用一种结构化高级语言构造分区描述器，编制动态分区分配算法和回收算法模拟程序。
The simulation program of digital signal average experiment has been written with MATLAB, It is simple and the result of the experiment is reliable.
用MATLAB语言编写了数字信号平均实验的模拟程序，该模拟方法简单，实验结果可靠。
The simulation program PROPER-MT for analysis of multiple-pulse and two-dimensional FT NMR experiments using the algebra of product operators is reported.
本文报道了利用乘积算符方法分析多脉冲及二维FT-NMR实验的模拟程序PROPER-MT。
A numerical simulation program for flexural load effects of rc beams was compiled based on the theory of reinforced concrete and finite element software ANSYS.
根据钢筋混凝土理论和ANSYS有限元软件编制了实验梁受弯荷载效应模拟计算程序。
Using FFT to workout a wind load simulation program. The computer simulation of the stochastic wind field is achieved. The 16-dimensional random process is got.
采用快速傅立叶变换法（FFT）编制了风荷载模拟程序，实现了随机风场的计算机仿真，仿真得到了16维脉动风荷载时程样本。
The SPICE2(simulation program with integrated circuit emphasis)polynomial controlled source can be used to realize a number of nonlinear mathematical functions.
利用SPICE（集成电路通用模拟程序）的多项式受控源可以实现多种复杂的非线性数学方程。
The simulation program for the valve motion was developed, and simulation tests were carried out on the valves of both Model F800 and Madel 3nb-1300 drill pumps.
此外编制了泵阀运动规律的仿真程序，并分别对F800钻井泵泵阀和3nb—1300钻井泵泵阀进行了仿真试验。
A simple equivalent circuit model of quantum well laser (QW LD) which is derived by QW rate equations and is accomplished in the circuit simulation program SPICE.
给出一个新的量子阱激光器等效电路模型，由量子阱激光器单模速率方程推导得到并在电路模拟程序SPICE中完成。
In this paper, the actual combination of surveys and traffic simulation program was also made for traffic diversion safety assessment and comprehensive evaluation.
本文通过实际调查和交通仿真相结合还对交通分流方案做出了安全评价和综合评价。
The mathematical model used to microscopically image multi layered tissues is presented. The basic skeleton of the simulation program is demonstrated with flow chart.
推导了模拟多层样品显微成像的数学模型，给出了用程序框图表示的基本仿真系统骨架。
In addition, it is easy to make relevant computing programs based on the resolution principles, arrangement process and the given computer simulation program frame chart.
另外，根据模型的求解原理、编排过程及给出的计算机仿真程序框图，很容易编制有关的计算程序。
On the basis of them , load models and simulation program of the cutting head are given , and the random loads and instantaneous cutting power are simulated and analysed.
在此基础上，确立了截割头的载荷模型及其模拟方法，并利用编制的计算机程序对截割头的随机载荷以及瞬时截割功率进行了模拟和分析。
On the basis of them , load models and simulation program of the cutting head are given , and the random loads and instantaneous cutting power are simulated and analysed.
在此基础上，确立了截割头的载荷模型及其模拟方法，并利用编制的计算机程序对截割头的随机载荷以及瞬时截割功率进行了模拟和分析。
应用推荐