Too short holding time: Not enough weight, empty inside, small dimension.
保压时间太短：重量不足，产品内部空洞，尺寸偏小。
A variable displacement pump could save energy during the long holding time.
变量泵可在长的保压时间内节省能源。
A series of experiments were performed at 1 423 K for different holding time.
在1 423K条件下，针对保温时间进行了一系列实验。
A longer holding time of ultrasonic wave causes a horizontal localized shear region.
超声时间的延长在金丝球内产生水平剪切层。
The influence of synthesis temperature and holding time on synthesis was investigated.
研究了合成温度和恒温时间对反应过程的影响。
It is very easy to operate and offers one settable heating-up ramp and one holding time.
它易于操作，并提供一条可设置的加热曲线和一段保温时间。
Effect of sintering temperature and sintering holding time on green density was analyzed.
分析了烧结温度和烧结保温时间对压坯密度的影响。
From restrictions on bank loans, buyers holding time, the sale of house tax policy, etc. can start.
从银行贷款的限制，买家保温时间，买卖房屋的税收政策，等等就可以开始。
The microwave synthesis is superior to conventional nitration in peak temperature and holding time.
微波高温合成技术的合成温度和合成时间较传统工艺具有明显的优势。
The results show that lengthening holding time leads to the decrease of ultimate residual porosity.
结果表明：随着保温时间的适当延长，能有效地降低复合材料的残余气孔率；
Holding time is determined by the solidification time of the gate. We decide it according to the weight.
保压时间的确定以浇口冷凝为依据。通过产品称重来确定。
The influence of brazing temperature and holding time on microstructure and tensile strength was studied.
研究了钎焊温度和保温时间对钎焊接头组织和性能的影响。
The changes of the phase and thickness of the boriding layer for different holding time are investigated.
研究了经过不同时间加热后渗硼层深度的变化及物相变化。
The effects of particle size, synthesis temperature, holding time and flowing gas atmosphere were studied.
研究了粉末颗粒、合成温度、保温时间和气氛对合成产物氮含量的影响。
The main factors that affect the grain refinement are heating and cooling rate, holding time and cycle index.
影响细化效果的主要因素有：加热速度、保温时间、冷却速度和循环次数。
The casting after cast can be fast cooled by the device, the holding time of the casting can be effectively shortened.
采用本装置对浇注后的铸件进行快速冷却，有效缩短了铸件的保温时间。
The effect of holding time on intergranular phase and mechanical property of GPS silicon nitride ceramics was studied.
研究了保温时间对气压烧结（GPS）氮化硅陶瓷晶界相及力学性能的影响。
The heating temperature and holding time had distinct effects on the copper diffusion depth in the stainless steel socket.
结果表明：铜在不锈钢衬筒中的扩散深度随着停留时间和加热温度的增加而增加；
The results show that heating temperature and holding time are two important factors affecting the grain size and uniformity.
实验表明，加热温度和保温时间是影响晶粒尺寸和均匀性两个重要的因素。
The result indicates that under different quenching temperature and holding time, the formed bainite morphology are different.
结果表明，在不同淬火温度和保温时间下形成不同的贝氏体形貌。
The result shows that the decarburization depth increases with the increase in temperature and holding time for the two steels.
结果表明，两种弹簧钢的脱碳深度随提高加热温度和增加加热时间增大。
The effects of solid-solution temperature and holding time on the grain growth and hardness of GH4169 superalloy were investigated.
研究了热处理温度和保温时间对GH4169合金晶粒长大规律和硬度的影响。
The activity of PPO in the juice decreased gradually with the rise of heating temperature and the extension of pressure holding time.
随着保压时间的延长和温度的升高，桃汁中多酚氧化酶相对活性逐渐降低。
Methods Of refrigerated transport Methods and insulation measures to observe the transit of drugs in refrigerated holding time of change.
方法分析各种冷藏运输方法及保温措施，观察冷藏药品在运输中的保温时间变化。
The effects of baking temperature, holding time and binder on secondary luminescence properties of phosphor were systematically explored.
研究了烧结温度、保温时间以及粘结剂对荧光粉二次性能的影响。
The effect of heating temperature, holding time and cooling mode on its crystallizability and dissolution rate of potassium is not obvious.
改变合成温度、保温时间以及冷却方式等，对合成试样的结晶性能以及试样中钾元素溶出率的影响很小。
Generally we considered the affection elements of the temperature test results, is the temperature, holding time, temperature change rate and so on.
通常认为，影响温度试验效果的要素有温度、停留时间、温变率等。
The rate of antioxidant degradation is affected by extrusion temperature, holding time, heating methods and the activation energy of the antioxidants.
挤压稳定化温度、保温时间、加热方法和抗氧化组分的活性能影响抗氧化组分的分解速率。
The influence of the rate of heating at phase transformation region, temperature of austenitizing and holding time on the austenite grains are studied.
讨论了在相变区的加热速度、奥氏体化温度及保温时间对奥氏体晶粒的影响。
The influence of the rate of heating at phase transformation region, temperature of austenitizing and holding time on the austenite grains are studied.
讨论了在相变区的加热速度、奥氏体化温度及保温时间对奥氏体晶粒的影响。
应用推荐