Uniformly distributed load along a line of infinite length;
均布荷载作用在一无限长的直线上；
Uniformly distributed load on an infinitely long strip-area;
均布荷载作用在无限长的条形面积上；
Triangularly distributed load on an infinitely long strip-area.
三角形荷载作用在无限长的条形面积上。
Tsung is an open source, multi-protocol, distributed load testing tool.
Tsung是一个开源、多协议、分布式的负载测试工具。
How to equal the non-uniform distributed load for equivalent uniform distributed load.
如何确定楼板上非均布荷载的等效均布荷载?。
In general, the stress function of any distributed load can not obtained by integration.
一般不能由积分得到分布载荷的应力函数。
Loads are regarded as axisymmetrical distributed load and uniform moments along the edge.
荷载为轴对称分布荷载及均布边缘力矩。
Distributed load is regarded as polynomial function or uniformly distributed moment all ng the edge.
荷载采用了多项式形的分布荷载及均布边缘力矩。
The distributed load is regarded as polynomial function or uniformly distributed moment along the edge.
荷载采用了多项式型的分布荷载及均布边缘力矩。
The precise formula of node force fitted second order distributed load is developed sing virtual work principle.
使用虚功原理和位移线性插值推导了满足二次分布力作用的精确节点力分配公式。
Distributed load is the type of polynomial. The support may be elastic. In all examples convergent results are obtained.
分布荷载为多项式型，支座可为弹性支座，在所有的算例中均取得了收敛的数值结果。
Based on the magnitude of active soil pressure, parameters like bend are calculated applying evenly distributed load method.
本文根据主动土压力大小，应用均布荷载梁计算方法，计算其挠度等参数。
You'll learn how to run remote tests with increased user loads, including setting up remote machines for distributed load generation.
您将学习如何使用IBM Rational Performance Tester通过增强的用户负载运行远程测试，包括如何为分布式的负载发生器设置远程机器。
Loads are regarded as axisymmetrical distributed load, uniform moments and uniform radial forces along the edge or their combination.
荷载为轴对称分布荷载、均布边缘力矩及径向力或它们的联合作用。
A model for analyzing the large deflection of an elastic cantilever beam with constraint under uniformly distributed load was established.
建立了分析均布载荷作用下受约束悬臂梁的弹性大变形三阶段模型。
Under similarly distributed load the anti-shock strength is analyzed with regard to cracking armor plate and the thermit welding armor plate.
对有裂纹的装甲钢板和铝热焊修补后的装甲钢板在受同样正向分布载荷下进行了抗击强度分析。
In numerical examples, distributed load is regarded as polynomial function, cosine function or uniform moments along the edge and their combination.
在计算例题中，荷载采用多项式形式、余弦函数形式的分布荷载以及均布边弯矩荷载或者由它们组合而成的荷载。
This method proved available to find the stress intensity factors of the distributed load by integrating the intensity factors of concentration load.
通过积分集中载荷的应力强度因子求分布载荷的应力强度因子的方法是可行的。
Numerical computation is made in the various cases of simply and clamped support under uniformly and concentrically distributed load for the engineers.
并就均布与集中载荷作用下外周边简支与固支的各种情形，作了数值计算，以供工程人员参考。
This paper described the evident expression of the problems on the nodal forces due to the distributed load of the structure in a rigid frame with general loads.
本文阐述了在一般分布载荷下，刚架结构的等效结点载荷的显式表达问题。
In this paper the behavior, failure models and ultimate bearing capacity of the two-span continuous wall-beams under the uniformly distributed load is presented.
本文论述了两跨连续墙梁在均布竖向荷载作用下的受力特性、破坏特征和承载能力。
The analytic expressions of deflection and displacement of the beams for various boundary conditions were obtained under combined electric field and uniformly distributed load.
并求得在电场和均布力联合作用下各种边界条件梁的挠度和位移解析表达式。
The present article researches the problems of the lateral instability of cantilever rectangular plates under a concentrated force or a uniformly distributed load respectively.
本文研究了悬臂矩形板受均布载荷或集中载荷作用时的侧屈问题。
Then, the authors unify this method with the directory-based load balancing algorithm to reduce the distributed load balancing problem to a centralized problem at each directory.
然后将该方法与基于目录的负载平衡方法相结合，将分布式负载平衡简化为目录中节点的负载平衡。
Stress distribution at cross section of transverse uniformly distributed load and non-uniformly distributed load applied to concrete cylinder by finite element method is analyzed.
采用有限元的方法计算分析了混凝土圆柱体在受横向均匀线荷载和非均匀线荷载时其横截面上的应力状况。
Under action of uniformly distributed load or uniformly distributed moment along edge, results are compared with that obtained by perturbation method, and it shows that the method used in…
均布荷载或均布边缘力矩作用下的计算结果同摄动法的计算结果作了比较，结果表明本文的方法具有大得多的收敛范围。
The analytical numerical results for circular plates of clamped and immovable simply supported edges, under uniform distributed load, are presented by using the method of weighted residuals.
最后由加权积分法给出均布载荷作用下周边固定和周边不动简支圆板的解析数值结果。
Combined the curve theory of differential geometry and the cable model applied distributed load, form analysis and tension analysis of boundary cable, ridge cable and valley cable were performed.
结合微分几何的曲线论和分布荷载作用下索的受力模型，研究了索膜结构中边索、脊索和谷索的受力分析和形状分析。
The circular elastic slice of degassing valve was simplified as ring mechanics and the mechanic model of the slice under uniformly distributed load was established to investigate its deformation.
将透气阀圆形弹性阀片的应用结构简化为了环形结构，建立了阀片受均布载荷时的力学模型，并研究了阀片的弯曲变形。
This study embodies the key-technology application of digital gas fields, in the mean time, it puts forward the distributed load balance of digital gas fields 'storage management information system.
这项研究在体现数字化气田关键技术应用的同时，提出了数字化气田仓储管理信息系统的分布式负载平衡问题。
应用推荐