The vital part of the incandescent electric lamp is the tungsten wire inside the bulb.
白炽电灯的关键部分是灯泡里的钨丝。
Electricity that passed through the thin tungsten wire inside the bulb makes the wire very hot.
当电流通过电灯泡里的细钨丝时，会使钨丝很热。
Electricity which is passed through the thin tungsten wire inside the bulb makes the wire very hot.
当电通过灯泡里的细钨丝时，会使钨丝达到很高的温度。
Applied for making stranded tungsten wire, tungsten heater element and other no special temperature required devices.
用于制造钨绞丝、加热子及其他不要求高温性能的零件。
The reason why tungsten wire is easy to break in the silicon thin film deposition process by hot wire deposition method was explained.
揭示了常规热丝法薄膜淀积工艺中热钨丝易断裂的原因。
Provide flexible shaft (tungsten tungsten wire rope), molybdenum, molybdenum seed chuck hammer, molybdenum, molybdenum tube two feed system.
提供钨软轴(钨丝绳)、钼重锤、钼籽晶夹头、钼导流筒、钼二次进料系统。
Sensitive components for the hot wire, such as tungsten wire, platinum wire, rhenium wire, and the composition of the bridge by the hot wire.
敏感元件为热丝，如钨丝、铂丝、铼丝，并由热丝组成电桥。
The paper describes a microcomputer group control system for the electric tungsten wire drawbench and the structures of its hardware and software.
本文介绍了一个钨电拉丝机微机群控系统及其硬件、软件结构。
Tungsten Wire Mesh is made from doped powders, that is, powders in which small quantities of potassium, silicon and aluminum have been incorporated.
钨丝网是由掺杂粉末，粉末中，少量的钾，硅和铝已经注册成立。
Tantalum wire and tantalum-tungsten wire are mainly used as medical implanting elements, heating elements in high temperature furnace, anticorrosive nets.
钽丝、钽钨合金丝主要用于医学植入元件、高温炉加热元件、防腐织网等。
Tungsten Wire Mesh has been presented above, want more similar products, please click Tungsten Wire Mesh Cloth, Tungsten Wire Cloth, Tungsten Wire Netting.
已提交上述钨丝网，希望更多的同类产品，请点击钨丝网布，钨丝布，钨丝网。
The general description of a redraw process for American famous 218 tungsten wire is given. The quality control during the manufacturing of the fine tungsten wire is discussed.
介绍了著名的美国218牌号钨丝的细丝拉伸工艺，并对细钨丝生产过程中的质量控制进行了探讨。
This wire inside an electric lamp is not made of copper but it is made of tungsten.
电灯里面的电线不是铜丝而是钨丝。
At the time of purchase, the user must check the slot size and a wire board tungsten steel precision, smoothness, especially with the line wheel and the arc part of roundness.
在购买的时候，用户必须检查钨钢件导线板的尺寸和线槽的精度、光洁度，特别是和线轮接触的圆弧部分的圆度。
With high heats and extraordinarily ingenious methods, tungsten was so converted that it could be drawn into wire, and the wire became stronger than steel of equivalent size.
果然，它被人类征服了。高温和格外独创性的方法让钨改变地如此彻底以至于它竟然被制成钨丝，比同等尺寸的钢更加强韧。
In order to obtain joints with high reliability, excellent performance of heat resistance and fatigue resistance, precise resistance spot welding is used to join Tungsten and Molybdenum wire.
为了实现汽车车灯中钨、钼丝材料的连接，并使其满足高可靠性、耐热、耐疲劳性能优异等要求，采用了精密电阻点焊方法。
Using WF6 and H2 as raw materials, tungsten plate formed by powder metallurgy as substrate, the deformable tungsten ingots were prepared successfully by a hot-wire CVD experimental facility.
以WF6和H2为原料，粉末冶金钨板为基体，采用热丝开管气流化学气相沉积试验装置，成功地制备出可变形钨锭。
The thin wire is not made of copper; it is made of tungsten.
细导线并不是由铜制的，而是由钨制的。
Because TIG welded joints without filler wire always hold low strength and poor formation, tungsten inert gas welding process with filler wire is inevitable.
由于镁合金不填丝的TIG焊接接头强度低，焊缝表面成型不好，所以，镁合金的填丝tig焊接方法不可避免。
Because TIG welded joints without filler wire always hold low strength and poor formation, tungsten inert gas welding process with filler wire is inevitable.
由于镁合金不填丝的TIG焊接接头强度低，焊缝表面成型不好，所以，镁合金的填丝tig焊接方法不可避免。
应用推荐