One of the broken tooth gear is one of the main reasons.
其中轮齿的折断又是齿轮失效的主要原因之一。
A measuring method and calculation on value m of circular tooth gear are introduced.
介绍了圆弧齿轮M值的测量方法和数值计算公式。
Gear coupling of many hundreds of varieties, but the basic form is two: 1, inner and outer tooth gear with style;
齿式联轴器的品种有上百种之多，但基本形式就是两种：1、内齿和外齿结合式；
Taking type CCB gear pumps, this paper analyzed such characteristics of the circular tooth gear pump as low noise.
本文以CC B型齿轮泵为例，分析了圆弧齿轮泵的低噪声等特性。
The engagement of the instrumental circular tooth gear transmission has been investigated. The condition of the correct engagement is given.
本文对仪表园弧齿轮的啮合进行了研究，提出了正确啮合的条件。
High tooth gear has small module, small pressure Angle, and large addendum to enlarge the transverse contact ratio, improve gear strength, and reduce the noise.
细高齿齿轮是采用小模数、小压力角、大齿顶高来加大端面重合度，达到提高齿轮强度、降低噪声的目的。
A new structure of the transmission system of BIVIS is designed, and the design idea of using the double circular tooth gear in transmission system of BIVIS is proposed.
设计了一种新型双螺杆磨浆机传动系统的结构，提出了在双螺杆磨浆机传动系统中运用双圆弧齿轮的设计思路，设计并校核了双圆弧齿轮的具体参数。
Recently, the domestic automobile manufacturers puts forward the application of 'high tooth gear 'in order to reduce the transmission gear noise, and improve gear strength.
近年来，国内外汽车变速器厂为了降低齿轮噪声、提高齿轮强度而提出采用“细高齿”齿轮，并对其进行研究与应用。
The present invention relates to a rolling method for manufacturing special metal products, in particular, it relates to an equipment for making slotted tooth and tooth gear.
本发明涉及用轧制方法制造特殊的金属物品，尤其是制造槽齿、齿轮的装置。$多槽齿一次成型装置由工作部分和复位部分组成。
The method was discussed for how to integrate optimizing and building model with finite element analysis on 3D development and analysis of outer-tooth gear pump through UG design platform.
探讨通过UG设计平台，如何将优化程序、3D模型建立、有限元分析等，有机集成于外啮合齿轮泵齿轮3D设计和分析中去。
The transmission part is an involute gear, and the working part can adopt different working faces, such as a cylinder excircle face, a circular arc tooth or an involutes tooth gear top cavetto.
传动部分是渐开线齿轮，工作部分可采用不同的工作面，如圆柱外圆面或圆弧形齿或渐开线齿轮齿顶修圆。
Comparing with involute gear pumps, circular tooth gear pumps have following characteristics: compact structure, no pulsation, stable rotation, high efficiency, low noise, and long working life.
与渐开线齿轮泵相比，圆弧齿轮泵的特点是：体积小、无脉动、转动平稳、效率高、噪声低以及寿命长等。
Cycloidal tooth profile of the internal gear pump, also called cycloidal rotor pump, pump the small gear and internal gear only related a tooth, so the internal gear pump do not need to set partition.
摆线齿形的内啮合齿轮泵又叫做摆线转子泵，泵中的小齿轮和内齿轮只相关一个齿，因此这种内啮合齿轮泵不需要设置隔板。
Design characteristics of intermittent gear mechanisms of action toys are introduced in tooth form, structure, material applying and manufacturing technology.
介绍了机动玩具中不完全齿轮机构在齿形、结构、材料应用和加工工艺方面的设计特点。
The SL85 pulse wheel assembly is imprinted with magnetic poles that provide higher pulse counts than traditional gear tooth wheels.
脉冲的SL 85车轮印有大会提供比传统的齿轮齿车轮更高的脉冲计数磁极。
Paint the tooth flank of the big bevel gear with a thin and equal red lead coat.
即在大锥齿轮的齿面上涂一层薄而均匀的红铅油，然后转动齿轮数圈。
Depending on the sensor model the number of pulses resulting from each gear tooth may be 2 to 16, with the nature of the realtime processing ensuring that this occurs from the first tooth sensed.
根据速度传感器的型号，每一个轮齿产生的脉冲数可以是2- 16，并通过实时处理的特征，确保这一脉冲从第一个轮齿开始旋转时就能感应到。
Some cars have variable-ratio steering, which uses a rack-and-pinion gear set that has a different tooth pitch (number of teeth per inch) in the center than it has on the outside.
有些车的转向系角传动比是可变的，这种转向器采用齿轮齿条式，它在中间而不是外部，有不同的齿密度（每寸齿数）。
Typically, 60-tooth, 16 - pitch gears provide the optimum characteristics for RPM measurement, but other gear types can serve special application needs.
通常情况下，60齿，16-沥青齿轮转速的测量提供了最佳的特点，但其他类型渔具，可以为特殊应用的需要。
Internal gear pump has two kinds of tooth profile namely: involute profile and cycloidal tooth profile.
内啮合齿轮泵有两种齿形即：渐开线齿形和摆线齿形。
The active design technique of hypoid gear tooth face provides a kind of fresh method of the hypoid gear design.
准双曲面齿轮齿面主动设计技术为准双曲面齿轮副的设计提供了一种全新的思路。
This means that wear is evenly distributed over the gears since each tooth on one gear touches on the other gear the same number of times.
这就意味着，由于一支齿轮上的每一个齿面将与另一个齿轮的齿面接触相同的次数，因此磨损面均匀的分布于齿轮的每一个齿上。
Analyses the internal gear tooth profile by using conjugate outline's meshing theory.
利用共轭齿廓的啮合理论对内齿轮进行了齿形分析。
The model is used to understand a series of formulae, for example, mean single tooth stiffness, gear pair mesh synthesizing stiffness, effective mass, nature frequency and critical rotating speed.
根据这一振动模型，推导了齿轮副的平均单齿刚度、单对轮齿啮合综合刚度、有效质量、固有频率与临界转速等一系列计算公式。
We invent the spherical gear with ring involute tooth.
发明了渐开线环形齿球齿轮机构。
And it analyzed that hob tooth height and tooth top pour round radius impacted on gear tooth root crooked stress.
分析了滚刀齿高和齿顶倒圆半径对所切齿轮齿根弯曲应力的影响。
And it analyzed that hob tooth height and tooth top pour round radius impacted on gear tooth root crooked stress.
分析了滚刀齿高和齿顶倒圆半径对所切齿轮齿根弯曲应力的影响。
应用推荐