• The thickness of slab is determined by punching shear capacity.

    厚度一般切条件控制

    youdao

  • Discussion is made on this methods from flatness, thickness of slab and elevation control.

    平整度控制、板标高施工控制三个方面滑模摊铺施工方法进行论述

    youdao

  • By changing the thickness of cold-form deck, thickness and strength of concrete, amount of steel stud and other parameters, the paper discussed the behavior of loaded composite-slab.

    通过压型钢板厚度板厚度、强度等级、栓钉数量几个参数变化探讨组合板在荷载作用下的内力、变形情况。

    youdao

  • The design parameters and the calculating method of the slab thickness were given.

    确定了结构设计参数路面板厚度计算方法

    youdao

  • The parameters of the optical slab glass waveguide (refractive index and thickness of thin film) were measured by a new technique for using the prism coupler, i. e., leaky mode method.

    使用棱镜耦合器一种技术测量了平板玻璃波导参数(薄膜折射率厚度)。

    youdao

  • Additionally, the thickness distribution of solidified shell in slab mold are also studied in detail.

    研究了板坯结晶器凝固厚度分布

    youdao

  • The present work shows that the nonuniform thickness of solidified skin of slab created by the nonuniform cooling rate of the skin in the crystallizer is main cause for slab surface cracking.

    试验结果得知,结晶冷却不均,使坯壳凝固层厚薄不同,铸坯产生表面裂纹主要原因

    youdao

  • By the analysis of the deformation of metallic composite rolled products, a formula for calculating the thickness of covering slab for multilayer metallic composite rolling is derived.

    通过金属复合轧制变形分析导出多层金属复合轧制包覆板坯厚度计算公式

    youdao

  • The longitudinal surface cracks of continuous cast slab results from the thickness inhomogeneity of the initially solidified shell at the meniscus of mould.

    连铸板坯表面起因结晶器月面初生凝固厚度不均匀性

    youdao

  • In the soft reduction control process, the slab thickness and drafts can be controlled by the hydraulic system through controlling the inlet and outlet gaps of each segment.

    扇形段控制通过每个扇形段入口出口侧的两端辊子进行控制,实现板坯厚度及压下程度的控制,其控制液压系统来完成的。

    youdao

  • T he relation of the four parameters with initial slab thickness, initial slab width, width reduction and edger roll diameter was obtained and a new mathematical model was accomplished as well.

    得出表征立轧时轧件断面特征四个参量压量立辊直径板坯来料厚度及宽度间的关系建立了新的数学模型。

    youdao

  • Then the expression, consisting of the outer scale, the thickness of the irregular slab and the RMS electron density fluctuation, can be got further.

    得到谱指数不规则漂移速度可以进一步得到尺度电子密度均方起伏和不规则体厚度三个参数组成表达式

    youdao

  • These ingot molds can produce a slab which is subjected to a number of thickness reductions, sometimes associated with surface treatments and machining, depending on the various processes used.

    这些可以生产板坯根据使用各种方法,该板坯经历多次有时表面处理机械加工相关厚度减小。

    youdao

  • The uniformity of deformation during hot rolling could be improved by properly increasing the slab thickness and adopting large reduction rate in first several rolling passes.

    适量增加厚度机架分配较大压下有利于提高轧制过程应变均匀性。

    youdao

  • The distribution of large-sized inclusions was non-homogeneous along thickness direction of slab, which contents of inner arc slab were obviously higher than those of outer arc slab.

    铸坯中的大型夹杂物在厚度方向分布均匀含量明显高于外弧含量。

    youdao

  • The results show that the openness and shape of funnel mold are critical for formation of longitudinal cracking. The optimized funnel shape has relation to the slab thickness.

    结果表明漏斗结晶器开口度漏斗曲线形成重要影响,漏斗曲线优化坯出口厚度有关。

    youdao

  • The results show that the openness and shape of funnel mold are critical for formation of longitudinal cracking. The optimized funnel shape has relation to the slab thickness.

    结果表明漏斗结晶器开口度漏斗曲线形成重要影响,漏斗曲线优化坯出口厚度有关。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定