This paper emphatically analyzes key causes of over tolerences of strip width.
本文着重分析了带钢宽度超差的主要原因。
According to the aluminum strip width easily adjust the distance of two rubber mouth, up to 25 mm (optional).
根据铝条宽度轻松调节两个胶嘴的距离，可达25mm(选配)。-液压可启动双路系统确保稳定性能。
Each test strip width should be sufficient to reflect to the gem business card printing and membership card making.
每一尝试带的宽度答不足反响欲查察的制卡和会员卡制息成果。
With the increasing of strip width, the transverse difference of front tension stress decreases firstly, and then increases.
随着板宽的增加，前张应力沿横向的差距先减小后增大。
ON-line measurements of slab width during continuous casting and strip width as well as flatness during rolling are important.
连续铸造中板坯宽度和轧制过程中带钢宽度及平坦度的在线测量非常重要。
A new work roll contour is advanced which is a linear variable crown (LVC) roll. This roll contour can realize linear ratio of gap crown and strip width.
提出一种新型线性变凸度工作辊辊型即lvc辊型，这种辊型实现了辊缝凸度调节与板宽成线性化。
The cause of strip width shrink (SWS) during hot continuous rolling is analyzed. A method to calculate SWS ratio is provided, some approaches for SWS reduction are discussed.
分析了窄带钢热连轧过程宽度拉缩的原因，给出了计算宽度拉缩率的方法，探讨了减少宽度拉缩的技术途径。
According to process parameters given by level 2 model, TCS system changes gap opening of vertical edging rolls to control strip width through feed forward and feedback technology.
通过前馈和反馈技术，TCS按照二级模型给出的工艺参数实时变换立辊开口度来控制带钢的宽度。
For width of carbon steel, problem of strip head and tail width narrowing was solved effectively through optimizing adjustment of model parameter, and strip width accuracy was improved.
本文就碳钢的宽度而言，针对带钢头尾宽度拉窄的现象，通过对模型相关参数的优化调整，有效解决了头尾宽度拉窄的问题，提高了带钢的宽度精度。
LVC (Liner Variable contour) is a new type of work roll contour. Gap crown can linearly vary with strip width by use of the contour and strip shape performance can be adjusted through shifting.
工作辊辊型是一种新型辊型，这种辊型实现了辊缝凸度随板宽变化成线性变化，并可以通过窜辊来调节板形性能。
Paper tape Strip of paper which records data as a series of punched holes arranged in "channels" or "tracks" across the width. Also called Perforated tape, punched tape.
用连续打孔的方法记录数据的长条纸带。小孔横过纸宽，以“通道”或“轨道”排列。亦称穿孔纸带。
Taking a simplified foundation plane ast he example, this paper derives a recommended formula with less calculation errors, improving the method for calculating the width of strip foundation.
以一个简化的基础平面为例，导出计算误差较小的建议公式，以改进墙下条形基础宽度的计算方法。
Investigates the width prediction and setup of strip in rolling passes in a hot strip mill.
研究带钢热连轧生产线中成品带钢的宽度预报与设定。
If width of the stainless steel strip is not controlled during rolling, the edges must be trimmed.
如果不锈钢的宽度在轧制时没有得到很好的控制，就必须进行修边处理。
To obtain the gross mechanical property, a strip of uniform width was cut from the mesentery.
为了得到总的力学性能，从肠系膜中切出一个等宽的窄条。
Moreover, because the width of laser strip is constant, and the laser strip is continuous, LOG filter and image segment filter are proved to be very effective.
此外，根据线结构光光带带宽恒定和连续的特点，采取了LOG滤波和图像分割滤波的有效手段。
The combustor moving unit is constructed to a mode that the combustor can be moved left-and-right in the width direction of hot-drip strip.
燃烧器移动单元，该燃烧器移动单元被构造成能沿该热浸镀带的宽度方向左右移动该燃烧器；
SCRAP REDUCTION :To use the whole width of the coil, reducing to the minimum the distances between disc to disc to the strip edges, with a consequment, reduction of the scrap quantity.
减少废料：充分利用卷料的宽度， 采用高精密伺服电机驱动系统控制， 使圆片间距和圆片到料边的距离减少到最小， 从而减小废料量。
Besides, the depth of topmost geogrid to the width of strip footing is also greatly correlative to the safety factor, and the best ratio changes with the layers of geogrids.
此外，顶层筋材埋深与条基荷载宽度比值大小与边坡的安全性密切相关，其最佳比值随加筋层数不同而改变。
A formula of the stress and the width of plastic zone in strip coal pillars is derived by strictly mathematical calculation.
通过数学运算推导出条带煤柱塑性区应力及宽度的表达式。
Moreover, the width of the strip waveguides increases with the increasing laser power density.
随功率密度的增大，直写的条形波导的宽度线性的增大。
In this paper, we discussed the influences of the shrinkage rate and width of strip waveguides such as power density and scan velocity.
着重研究了激光直写工艺参数对薄膜收缩率和条形光波导宽度的影响规律。
A new sizing process schedule was applied to modify the sizing process and width reduction accuracy was improved obviously, the cutting loss at strip head and tail end was decreased also.
提出了新的减宽压下规程，对减宽技术进行了改进，减宽精度明显提高，带钢头尾部的切损减少。
The CSP process offers excellent pre-conditions with respect to a homogeneous temperature distribution over the strip length, thickness and width.
薄板坯处理技术在考虑到板坯在长度，宽度，厚度的温度均衡，提供了出色的先决条件。
For the present situation of rough rolling strip head and tail low width precision on hot strip mill, analysis the cause of strip head and tail width tolerance.
针对热轧带钢粗轧头尾宽度尺寸精度低的现状，分析了带钢头尾宽度超差的原因。
The strip layout is to reflect the stock width, the progression, and the tonnage required to produce the stamping. Strip layouts should be developed so that scrap pieces are not left in the die.
在正式设计之前必须提供料带排布，料带包含料带宽，步距，冲床吨位，料带应保证废料不停留在模具上。
Roughing setting up mathematic model is adopted in the width control of 1780 mm hot strip mill of Anshan Iron and Steel Group Corporation.
在鞍钢热轧带钢厂1780生产线的宽度控制中，主要采用了粗轧设定数学模型。
The crosstalk suppression of non-parallel microstrip lines using strip protection with increased width is equally effective.
使用增加宽度的防护带抑制非平行微带线间串扰同样有效；
The crosstalk suppression of non-parallel microstrip lines using strip protection with increased width is equally effective.
使用增加宽度的防护带抑制非平行微带线间串扰同样有效；
应用推荐