This paper introduces a method of hardware constitution and software design of embedded system containing Ethernet interface and adopting DSP as its core processor.
介绍了以DSP为核心具有以太网接口的嵌入式系统的硬件电路组成和软件设计方法。
The design of hardware and software of whole embedded system have been made by cross-debug.
通过交叉调试，完成了该嵌入式控制系统的整个软件和硬件的设计工作。
E. platform based embedded CNC system, unlimited upgrade expansion function. The anti interference design of hardware and software synchronization to ensure the reliable operation of the system time.
基于平台的嵌入式数控系统，无限升级扩展功能。软硬件同步的抗干扰设计，确保系统时间可靠运行。
The design of embedded software of MFMC and the communicating protocols about all communications in digital laboratory system are included in this part.
这一部分主要包括多功能主控制器（MFMC）内嵌软件实现和各部分通信的通信协议的制订。
In this paper, we introduce embedded video compression and decompression system based on a chip ADV202, focus on the design of the system hardware and software process.
本文介绍了一种基于ADV202芯片的嵌入式视频压缩和解压缩系统，重点讨论了系统硬件电路设计及软件流程设计。
A new control mode of diamond pressure machine was introduced, which is embedded control system based on DSP (TMS320LF2407), also, hardware design and software design were introduced in this paper.
本文提出了一种金刚石压机的新型控制模式—基于DSP (TMS320 LF 2407)的嵌入式控制系统，并介绍了该控制系统的软硬件设计。
It introduces the system design of mechanical hand using embedded speech recognition. The design mainly includes two parts: hardware design and software design.
介绍了利用嵌入式语音识别技术来控制机械手的系统设计过程，包括两部分硬件设计和软件设计。
The software design and hardware implementation of the total system are also proposed, the embedded platform of monitor unit and implementation of GPRS function is discussed chiefly.
文中给出了整个系统的软、硬件设计方案，并重点讨论了监测节点嵌入式平台和GPRS通信功能的设计与实现方法。
With the hackers' attacks changing from the desktop to embedded system, hardware and software security decision are leaded the whole design of the embedded systems.
随着骇客的攻击目标从台式计算机转向嵌入式系统，硬件和软件的安全决策将主导着嵌入式系统设计的流程。
This paper completes the design of embedded MP3 player, provide the system structure figure, the circuit diagram of the hardware, software flow chart and compile programme.
介绍了嵌入式MP 3播放器的设计，并给出了系统结构图、硬件电路图、软件流程图以及软件程序的编写。
This paper focus on the system design of the embedded handhold , addresses the hardware design and software design in detail.
文章以嵌入式手持终端的设计为主线，详细讨论了嵌入式手持终端的硬件系统设计和软件系统设计。
The design principle, system frame, critical technologies and kernel algorithm of the software package of soft measurement based on real time embedded operating system are introduced.
介绍了基于实时嵌入式操作系统的软测量软件包的设计原理、系统框架、关键技术及核心算法。
Traditional methods for designing interface, in our opinion, cannot satisfy the needs of interface design for embedded software system. We purpose a new technology of interface customization.
针对嵌入式软件界面子系统的设计特点，介绍了进行嵌入式软件系统界面设计的可定制技术，并提出了一个界面可定制模型。
A applied design scheme for the hardware and software of synthetic protection system for motors which is mainly composed of ADUC812 with embedded MUC is proposed in this paper.
文章提出了以内嵌MUC的ADuC812为主构成的电动机综合保护系统硬件结构和软件框图的应用设计方案。
Software design in embedded system software for digital television receiver is very complex for the limitation of hardware resource and requirement of realtime processing.
在嵌入式数字电视终端系统软件的设计中，由于终端硬件资源有限和实时性的要求，造成其软件设计具有较高的复杂度。
We analyze the mode of embedded software development, and mostly explain the design and development of the experimentation system, which will improve the practice ability of embedded application.
本文以社会对嵌入式人才的需求为基础，对嵌入式系统及应用课程的特点、教学方法和经验进行了总结，主要分析了嵌入式软件开发模式。
This paper analyzes the application of ARM microprocessor in a gateway of embedded remote measurement and control system, elaborates on the design method about software and hardware of this gateway.
分析了ARM微处理器在嵌入式远程测控系统网关中的应用，重点阐述了网关软、硬件的设计方法。
Hardware software partitioning is a key problem in Hardware software co design of embedded system.
软硬件划分是软硬协同设计中的一个关键问题。
This paper introduces the function of the intelligent monitor and protection system of AC motor and the design of hardware and software based on 80c196kc embedded microcontroller.
介绍了智能化交流电机测控保护器的功能以及基于80c196K C单片机的系统硬件软件的的设计。
Secondly, it introduces the design of hardware and software in the embedded system.
其次，分别论述了本数据采集系统的硬件设计和软件设计。
The paper introduce a design of embedded Ethernet interface which base on ARM microprocessor LPC2106. The paper describe the hardware and software design of this system.
介绍了一种以ARM微处理器LPC2106为核心的嵌入式以太网接口设计方法。
This paper mainly presents the embedded system software design of the BS AS (Biochip Scan and Analysis system).
本文主要讨论生物芯片扫描分析系统的嵌入式系统软件设计。
Design of the application layer's GUI is very important in software planning of an embedded system.
在进行嵌入式系统的软件设计过程中，应用层gui的设计是一个非常重要的部分。
Diagnostic theory of embedded device, how to interface to PROFIBUS system and Internet network, how to design the whole software and how to connect the hardware was discussed in the paper.
文中将讨论嵌入式诊断设备的诊断原理，如何将嵌入式设备挂接到PROFIBUS总线系统和以太网中，如何工作，软件设计及硬件连接等。
Responsibilities: mainly engaged in design and development of embedded system software.
熟悉并曾投身于嵌入式软件产品开发。
This paper introduces a software and hardware design idea of a FM radio monitoring and receiving machine based on embedded ARM processer and embedded Linux operation system.
本文介绍了一种基于嵌入式arm处理器和嵌入式操作系统Linux的FM广播的监测接收机软硬件设计方法。
For shorten the developing period of embedded software and improve design standards, a configurable software approach for simulation system is proposed in this paper.
为缩短开发周期，提高嵌入式软件仿真系统的设计水平，提出一种组态化嵌入式系统设计。
This paper gives the system hardware and software design of embedded WSNs car security system.
本文给出了嵌入式无线传感器汽车防盗系统的软硬件设计方案。
This paper gives the system hardware and software design of embedded WSNs car security system.
本文给出了嵌入式无线传感器汽车防盗系统的软硬件设计方案。
应用推荐