On the basis of adopting the flexible control technology in buildings, in this paper, we brought forward a simplified model analysis method which could be easily used in active control technology.
在对建筑物采用柔性技术的基础上，本文提出了一种与之相适应的模态控制分析方法。
Use these simplified analysis points to decide what to include and what to exclude in your final star model.
使用这些简化的分析问题来决定最终的星型模型中包含什么以及排除什么？
This paper deals with the simplified calculating method of the temperature response of the round plate model through the combination of analysis and experiments.
本文通过分析计算和试验相结合，探讨了圆板模型具有单孔输入热量和多孔输入热量时温度响应的简化计算方法。
The suitable simplified calculation formula for calculation at working site is presented on the basis of making mathematical transformation and analysis to the mathematics model.
在对数学模型进行数学变换和数学分析的基础上，得出了适用于作业现场计算的简化算式。
The FEM analysis was conducted with the simplified model.
对简化模型进行了有限元模拟分析。
The approximate expression of various transient over-voltage have been obtained by analysis and deduction according to the simplified transmission line model.
根据简化后的集中参数线路模型，详细分析并推导了特高压系统各种操作过电压的近似表达式。
Global principal components analysis (GPCA) model is presented to the multidimensional dynamic data system and the time sequence solid data table is three-dimensionally synthesized and simplified.
对多维动态数据系统给出了全局主成分分析(GPCA)模型，并对时序立体数据表进行立体式的综合与简化。
Based on the analysis of heat and mass transfer, a simplified mathematical model describing the falling film crystallization process is developed.
本文在对降膜结晶分离过程进行传热传质分析的基础上，建立了简化数学模型。
The analysis of simulated result of the deformation of symmetrical plane proved that the simplified model is reasonable and feasible.
对模拟结果的对称面变形的情况分析论证了模型简化的合理性和正确性。
Using the results from finite element analysis of turbine rotor suppressed in heat stress, and simplified theoretical calculation equations, a mathematical model is established.
采用汽轮机转子热应力的有限元分析结果和简化的理论计算公式，建立汽轮机转子热应力的数学分析模型。
Upon the analysis to the behavior of the deflector under the instantaneous shock type external loading, the paper simplified the structure calculation model.
在分析了导流器承受瞬间冲击型外负荷的作用特性后，对结构计算模型进行了简化；
This indicates that this simplified model has correctly described the major processes and characteristics of the nonideal detonation, and can be used in explosive design and explosion effect analysis.
简化模型合理地描述了含铝炸药非理想爆轰的主要过程及非理想特性，可应用于含铝炸药的设计和爆炸效应的分析。
Based on the analysis of breakdown state in network, simplified model for optimal control of breakdown state was put forward.
在分析管网事故状态的基础上，建立了管网事故工况下的优化调度模型，并做了相应简化。
A method of analysis of the effect of aeroelasticity on the stability of elastic vehicles by using a simplified mathematical model of unsteady aerodynamic forces is proposed.
而后就简化的非定常气动力数学模型提出了分析气动弹性对飞行器稳定性影响的方法。
The simplified mechanical model is proposed with analysis of forces of abutments in this paper.
通过基牙的受力分析，提出了基牙的简化力学模型。
Resorting to a simplified mechanical model, this paper makes a theoretical analysis of the dynamic response of the gantry crane and loading bridge when their their trolleys collide with buffers.
本文用简化的力学模型对龙门起重机和装卸桥小车撞击缓冲器时的动力响应进行理论分析。
A model for simplified second order analysis of the double resistance to lateral force system is built on the basis to transform second order effect into negative stiffness.
为简化双重抗侧力体系二阶分析，将结构的二阶效应转化为结构的负刚度，从而建立分析模型。
Based on the widely adopted simplified model, a new vibration absorption analysis model is established for correctly representing the interaction of suspended floors.
本文在普遍采用的简化模型的基础上，提出了反映悬挂楼层之间相互作用的多段多层悬挂结构减振分析模型。
In dynamic analysis of large-scale complicated structures, the computational model is greatly simplified by considering local effect. Moreover, the accuracy of results is also enhanced.
在进行大型复杂结构的动力响应分析时，通过考虑局部效应，可在计算模型大大简化的同时，获得较为精确的计算结果。
Finally, the elastoplastic time-history analysis is carried out for the structure using a simplified story model.
最后采用弹塑性时程分析方法对简化的层模型结构进行了时程分析。
Finally, the simplified formulas for the bond strength and the simplified model for bond stress versus relative slip relationship are suggested based on the analysis of the test results.
最后，提出粘结强度的简化计算公式和粘结应力-相对滑移关系的简化模型。
With simplified unsteady aerodynamic force mathematical model, method of analysis for the effects of aeroelasticity on the dynamic stability of elastic vehicles is established.
就简化的非定常气动力数学模型提出了分析气动弹性时飞行器稳定性的影响的方法。
Then, by using beam element and MPC184 element, the finite element model for strength analysis was setup and simplified.
然后利用梁单元和MPC184单元，建立了供强度计算的有限元模型并进行了简化。
Based on the test and analysis a simplified formula for the joints' aseismic calculation was developed. The calculated results are in good agreement to those of the model test.
在试验的基础上给出了接头极限承载力的简化计算公式，计算结果与模型试验结果吻合较好。
By comparing the results of different simplified fe models with the real model of board connection and joint structure, the characteristics and rationality analysis of the results have been proposed.
通过比较板连接、转动连接结构在不同简化建模方式下与真实结构建模方式计算结果的差异，分析了各种简化建模方式计算结果的特点及合理性。
The 330mw simplified unit model, running in sliding pressure condition with a large load variation is constructed by means of the mechanism analysis and data fusion methods.
该文采用机理分析和数据拟合的方法，建立330MW机组滑压运行下大负荷变化范围内的模型。
On the basis of an analysis of fluidized-bed boiler dynamic performance the authors have designed a simplified model after consulting a self-adaptive SPC dual-ring selective system.
在对沸腾燃烧锅炉动态特性进行分析的基础上，设计了一种简便的模型，参考自适应SPC双环选择性系统。
A simplified spiral model is as a waterfall model with each phase preceded by risk analysis.
一个单一化的螺旋模型可以被看作每个阶段前都带有风险分析的瀑布模型。
A simplified spiral model is as a waterfall model with each phase preceded by risk analysis.
一个单一化的螺旋模型可以被看作每个阶段前都带有风险分析的瀑布模型。
应用推荐