大型径向负载能力。
They are all can't bear radial load.
它们均不能承受径向载荷。
Can bear radial load and two direction of axial load.
调心滚球轴承可以承受径向负荷及二个方向的轴向负荷。
Radial load capacity, suitable for heavy load, impact load.
径向负荷能力大，合用于有重负荷、冲击负荷的情况。
Thrust ball bearings can bear radial load, lower speed limit.
推力球轴承不能承受径向负荷，极限转速较低。
A direction can only carry axial load, can't bear radial load.
只能承受一个方向的轴向载荷，不能承受径向载荷。
The effect of radial load to radial stiffness can be neglected.
径向载荷的变化对轴承径向刚度的影响可以忽略。
The radial load has quite influences on the film thickness and hydrodynamic pressure.
渗透度对压力分布、油膜厚度也有一定影响。
Deep groove ball bearings mainly take radial load as well as take moderate axial load.
深沟球轴承主要承受径向载荷，也可承受一定量的轴承载荷。
Because it is the most popular type, its radial load capacity is assigned a value of one.
因为它是目前最流行的类型，其径向负荷能力被分配到一个价值之一。
No inclination of shaft relative to the will be caused by the radial load acting on the bearing.
使轴承上的径向负荷不对轴造成相对弯曲。
Taper roller bearings are generally used to support combined load mainly consisting of radial load.
圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。
These bearings are used to support combined radial and axial loads with the radial load prevailing.
这种轴承主要用来承受以径向负荷为主的径向与轴向联合的负荷。
Tapered roller bearings are generally used to support combined load mainly consisting of radial load.
轴承主要用于承受以径向载荷为主的径向与轴向联合载荷。
Tapered roller bearings are generally used to support combined load mainly consisting of radial load .
轴向载荷能力非常大，在承受轴向载荷的同时还可以彻骨你受干径向载荷。
High radial load capacity, especially for heavy loads or vibration, but can not afford a pure axial load.
有高的径向载荷能力，特别适用于重载或振动载荷下工作，但不能承受纯轴向载荷。
If this is not the case, the alignment needle roller bearing must be subjected to an additional radial load.
如果不是这样，必须使对中滚针轴承承受额外的径向载荷。
Deep groove ball bearing is inseparable bearing, mainly it can be subject to radial load and some axial load as well.
深沟球轴承属于不可分离型轴承，主要承受径向载荷，也可承受一定量的轴向载荷。
RADIAL LOAD : The load that is caused by forces seeking to tilt, bend, or shove a shaft out of line. (See: Thrust Load )
径向载荷：该载荷是由轴的倾斜、弯曲、挤压或偏心所造成（参见：轴向载荷）。
When radial load is applied, the active bearing can surpress the displacement of the shaft, thus obtaining an infinite stiffness.
当有径向载荷作用时， 自主式轴承能抑制轴颈位移并因此使轴承获得无穷刚度。
Plain Bearing Block Housings are made up of cap, base, aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦(铝青铜)，安装螺栓组成，主要承受径向载荷。
Plain Bearing Block Housings are made up of cap, base, aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦(铝青铜)，安装螺栓组成，首要承受径向载荷。
These bearings are featured by the extremely big axial load carrying capacity and mean while they can also carry cetrain radial load .
轴向载荷能力非常大，在承受轴向载荷的同时还可以彻骨你受干径向载荷。
Constant radial load (constant axial load center), in the load, the bearing can withstand 1 million transfer theory, the basic rating life.
恒定的径向负荷(恒定的中心轴向负荷)，在该负荷下，滚动轴承理论上可以经受1百万转的基本额定寿命。
These bearings can accommodate a certain proportion of radial load in addition to the axial load (see under "Equivalent dynamic bearing load").
除轴向负荷外，此类轴承还能承受一定的径向负荷（见“当量轴承动负荷”）。
Bearing a single row thrust ball bearings to the heart, which has at the same time to bear a greater bearing axial load and radial load capacity.
轴承采用了单列向心推力球轴承，这种轴承具有同时承受较大的轴向荷载和径向荷载的能力。
Tapered roller bearings are generally used to support combined load mainly consisting of radial load. Their cups are separable for easy assembling.
圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷：外圈可分离，组装容易。
The radial load which is hard to measure is obtained through simulation in practice, and a new method to shorten the roller mould design period is…
将有限元数值模拟方法引入异型棒线材的辊模拉拔中，为缩短辊模设计周期提供了新的方法。
The hydrostatic bearings can bear larger radial load, can measure larger bearings, and can enlarge the detection range and lower the detection cost.
静压轴承可以承受较大的径向载荷，可以使测量较大的轴承，扩大了检测的范围，减少了检测成本。
The hydrostatic bearings can bear larger radial load, can measure larger bearings, and can enlarge the detection range and lower the detection cost.
静压轴承可以承受较大的径向载荷，可以使测量较大的轴承，扩大了检测的范围，减少了检测成本。
应用推荐