The company has a mill run plant, an iron plant, a pipe casting plant and a cast plant.
科鑫铸管有限公司下辖选矿厂、炼铁厂、铸管厂、铸件厂。
Process and technological parameters of centrifugal pipe casting and the construction of WLZ84 type casting machine are introduced.
介绍了离心铸管的工艺、技术参数以及WLZ84型离心铸管机的结构、组成等。
Shanghai Joint Zest Machine Equipment Co Ltd is an enterprise which engages produce and sale of stainless steel pipeline and pipe casting.
上海久作机械设备有限公司是一家从事于不锈钢管道管件生产销售的企业。
It is necessary to store enormous measurement and control data related to temperatures and pressures during the operation of the centrifugal pipe casting machine.
在离心铸管机的运行过程中，有大量的温度、压力等测控数据需要保存。
Based upon the detection of the pouring temperature, and the mould temperature and speed, the process control for centrifugal pipe casting machines is realized by using a microcomputer.
在检测浇注温度、铸型温度和铸型转速的基础上，用微机实现了对离心铸管机的过程控制。
According to different casting methods, divided into continuous cast iron pipe and the centrifugal cast iron pipe, wherein the centrifugal cast iron pipe is divided into two types of sand and metal.
按铸造方法不同，分为连续铸铁管和离心铸铁管，其中离心铸铁管又分为砂型和金属型两种。
Manufacturing: Steel Pipe rolling, jumping pieces of hardware; Die-casting pieces for processing.
制造：钢管轧制，五金冲件；压铸件加工。
This company produces engineering machinery, automobile, engine, cast iron pipe and so on casting. Produc demonstration: clamp, planet Rack, Support, bearing cap, cast iron pipe, Products and so on.
本公司专业生产工程机械、汽车、发动机及排污管等铸件。产品展示：夹钳、行星轮架、差速器壳、支架、轴承盖、铸铁管等产品。
HCH-201 unsaturated polyester resin is designed for centrifugal casting molding glass pipe (HOBAS pipe) design of the structure layer resin is a low viscosity, medium reactivity of o-benzene resin.
201不饱和聚酯树脂是专门为离心浇铸成型玻璃钢管道(HOBAS管)设计的结构层树脂，是低粘度，中等反应性的邻苯型树脂。
One of keys of production of centrifugal casting pipe of s. g. iron is continuous and fast delivery of qualified base iron with proper chemical composition and temperature.
应用离心铸造工艺生产球墨铸铁管，连续快速提供化学成分和温度均合格的优质铁液是生产的关键环节之一。
This paper introduced that horizontal centrifugal casting technology is used to develop the composite acicular spheroidal graphite cast iron collar for tension reducing mill of Baogang pipe mill.
介绍了采用卧式离心铸造技术，试制宝钢钢管轧机使用的复合针状球铁张减机辊环的过程。
Glass fibre reinforced plastic mortar pipe(Centrifugal casting process)is introduced to be as jacking pipe material used in the design and construction of one jack engineering project.
玻璃纤维增强塑料夹砂管（离心浇铸工艺）作为顶管管材运用于顶管工程中的设计、施工介绍。
HCH-201 for the manufacture of centrifugal casting forming the glass pipe structure layer and the general FRP products.
HCH- 201用于制造离心浇铸成型玻璃钢管道结构层和一般玻璃钢制品。
The composite steel pipe made by the technology of SHS thermit centrifugal casting has excellent wear resistance and can be widely used in mines, electric power and building materials industry.
利用SHS铝热离心铸造技术制备的陶瓷内衬复合钢管具有优异的耐磨损性能，可广泛地应用于矿山、电力、建材等工业部门。
The results of the research show that Re-Al alloying improves the casting property of H13 steel, eliminates central pipe, refines grains and carbides, reduces the amount of S and P.
经分析表明，稀土铝合金化可以明显改善H13钢顶头的铸造性能，消除了中心缩孔现象，并细化了晶粒和碳化物，降低了S、P含量。
Therefore also widely used in thin-walled package of casting, such as pipe joint, fittings etc.
因此也广泛用于薄壁件的铸造，如水管接头、管件等。
This paper discusses PLC control system formation, casting technical process and control theory of PLC in centrifugal casting iron pipe machine.
本文介绍了PLC控制系统组成、浇铸工艺流程、及PLC在离心球墨铸管机中的控制原理。
It is found that the 'delamination always takes place along the centerline segregation band in pipe-line steel produced by continuous casting and then controlled rolling.
初步研究发现，对由连铸然后经控制轧制生产的管线钢层状撕裂几乎总是沿中心线偏析带发生。
The quantitative relation between hot pipe structure and cooling ability of partial die casting mould was approached.
研究热管结构对压铸模具冷却能力影响的定量关系。
Anchor chain hawser pipes shall be mounted on the port and starboard of the ship, made of steel plate. A casting anchor bell mouth shall be fitted at the lower end of hawser pipe.
锚链筒布置在船舶左右两舷，由钢板制成，每隔锚链筒的下端有铸钢锚唇。
Continuous casting of hollow tube is considered as a profound near net shape technology for pipe production.
空心管坯连铸技术被认为是管材生产更深层次的近终形制造技术。
It is introduced the design principal and operation method of CAD software for vanishing-mould casting process of nodular cast iron pipe. It can raise the design efficiency and precision.
介绍了球墨铸铁管件消失模铸造工艺的计算机辅助设计CAD软件的设计原理、操作方法，该CAD软件可提高消失模铸造球铁管件的工艺设计效率和设计精度。
The world steel pipe market does not show a good situation but the horizontal continuous casting technology for tube billets has been successfully developed.
世界钢管市场并不景气。水平连铸的管坯生产技术已经成熟。
The world, steel pipe market does not show a good situation but the the horizontal continuous casting technology for tube billets has been successfully developed.
世界钢管市场并不景气。水平连铸的管坯生产技术已经成熟。
Temperature distribution of the middle annular face of the mould in continuous casting pipe processing has been measured in industrial production condition.
在工业生产条件下测量了连续铸管铸铁结晶器中间环面的温度分布。
The performance, role, potential value and application ways of heat pipe in light alloy in permanent mold casting were expounded.
初步评估了热管在轻合金永久型铸造中的行为、作用、利用潜力和应用的基本形式。
The bottom of the electric casting tank is provided with an exhaust pipe which is besprinkled with tiny holes, and oil-free compressed air are put in the exhaust pipe to play stirring action.
在电铸槽底部设一布满微孔的排气管，并通入无油压缩空气起搅拌作用；
The protecting pipe for continuously-casting steel is made up by using general refractory material as basis and adding ceramic material through the processes of mixing, forming and heat treatment.
本发明涉及连续铸钢用保护管，它以一般连铸用耐火材料基础复合陶瓷材料经过混料、成型、热处理等工序制作，所得产品具有耐冲刷、抗腐蚀及较好的热稳定性等特点。
The protecting pipe for continuously-casting steel is made up by using general refractory material as basis and adding ceramic material through the processes of mixing, forming and heat treatment.
本发明涉及连续铸钢用保护管，它以一般连铸用耐火材料基础复合陶瓷材料经过混料、成型、热处理等工序制作，所得产品具有耐冲刷、抗腐蚀及较好的热稳定性等特点。
应用推荐