• Measure the dimensions of your flash gun’s head and mould the base to fit – you may need to make a few cuts and bends in the opaque plastic to get the right size.

    一下闪光头部尺寸下来底儿修理一下,可能适当的弯曲,使它们匹配。

    youdao

  • The mould make from the mould base supplied by the special manufacturer.

    选用专业生产厂家制造模具

    youdao

  • Visual information query system is the base of mould rapid response design.

    可视化信息查询系统实现模具快速响应设计基础

    youdao

  • Introduce the methods and principles of Holon model, combined with the character of mould workshop product, construct the framework of mould workshop management system base on Holon.

    文章介绍建模方法原则结合模具车间生产特点建立基于合弄的模具车间管理系统框架结构。

    youdao

  • An agent erp system framework was established and an erp system has been completed for mould base manufactory enterprises.

    建立了制造企业智能ERP体系结构此基础上设计实现了个完整的ERP系统

    youdao

  • In designing and making mould, fully utilizing standard mould base can simplify the design, raise the stability of quality, shorten the making cycle and bring down the costs.

    模具设计制造中,充分利用标准架零件简化设计提高质量稳定性缩短制造周期降低成本

    youdao

  • Mould the base body in the mould, and lay on the cutting trolley for demoulding after turning the cast mould over 90 degree by the upset hoist.

    模具浇注预养好的坯翻转吊装机构将模具整体经空中翻转90放置切割小车上进行脱模。

    youdao

  • This paper will recommend the selecting method of standard mould base of injection mould.

    该文介绍注塑模标准模架选用方法

    youdao

  • During the starting process, due to the injection mould machine demoulding, carbonizing materials mixed into the injection materials of white base to form the blackspot in the picture.

    开机过程中,由于注塑件的脱模碳化物料混入白底塑料内,造成照片中的黑点

    youdao

  • The gathering base of mould industry in Shenzhen is composed of 4 major sections including general management building, manufacturing enterprise, supporting enterprise, living and recreation areas.

    深圳市模具产业集聚基地主要综合管理大楼生产企业配套企业以生活休闲大部分组成。

    youdao

  • The development of the standard parts base and the drawing designing with the injection mould CAD system were stated and discussed.

    论述了注射cad系统标准件开发图形生成

    youdao

  • The whole technology process for casting the zinc base alloy patterns by plaster mould is also discussed.

    论述了利用石膏铸造锌基合金模具整个工艺过程

    youdao

  • So how to make the quotation of mould base standardized and rationalized has increasingly become the joint concern for both producers and customers.

    所以报价如何进行规范化合理化越来越成为制造商客户共同关心的问题。

    youdao

  • French literature history mould two typical characters that published: Lian Yu, Lars the base of a fruit alunite.

    法国文学史塑造出两个典型人物于连斯蒂涅

    youdao

  • Plaster mould precise casting process was used to manufacture zinc-base alloy mould for plastic wares production.

    介绍一种用于制造塑料制品生产合金模具石膏精密铸造工艺

    youdao

  • After studying on the molding technology, this paper designs a mould of bearing base and a mold for prepress of CP- DMC.

    基础设计制作了托辊轴承座双腔模具CP-DMC模压料预压模具。

    youdao

  • Fabricating and demoulding of the base mould is a key during the course of construction for precast plate girder of highway bridge.

    公路桥梁预制钢筋混凝土施工制作脱模关键

    youdao

  • The technical measures for mould unloading during the preparation of a spherical charge were described and a much better design for shaping base was put forward.

    文中简要阐述了制备球形过程中解决压装药件的退模问题所采取的技术措施提出了成型底座的设计方案

    youdao

  • Abstract: : in this paper, the author briefly discusses the stone in the sliding mode paver road base course side mould construction process of the application and construction control points, etc.

    摘要本文简单论述了滑模摊铺机道路基层施工过程中的应用以及施工控制要点等。

    youdao

  • Preferably the former is pivoted between open and closed positions and has a slightly V-shaped base which when abutted against a mould or formwork, urges the recess former into the closed position.

    优选地,成形器在打开位置闭合位置之间并且具有略微V形的基部V形的基部紧靠模具模壳促使凹部成形器处于闭合位置。

    youdao

  • Mix butter with biscuits. Spread and press on a 7 "mould to form a crust base."

    消化饼碎加入牛油拌匀,用匙羹压平7模中成饼底。

    youdao

  • Taking the research of the cavity of vacuum forming mould used for the nutritional box to grow seedlings as example. This paper introduces the new technology of liquid die forging of Zn base alloys?

    研制育苗营养钵塑模具型腔介绍锌基合金液态模锻一新工艺

    youdao

  • At present, the design and manufacture of refrigerator vacuum forming mould in China, is mainly base on 2d CAD two drawing, manually controlled machining, assistant with NC machining.

    目前国内冰箱设计制造主要是基于CAD制图,传统加工并辅以数控加工。

    youdao

  • The hydraulic casting machine is composed of a machine base, a mould opening and closing assembly, a lower loose core assembly, a hydraulic control cabinet and an electric appliance control cabinet.

    液压铸造机座开合总成总成、液压控制柜电器控制柜组成。

    youdao

  • A stop block is arranged at the base Angle of one side wall of every single-body U-shaped steel mould, and gaps between the stop blocks and the single-body U-shaped steel moulds are equidistant.

    个单体U钢模侧壁底角处,均设有限位,每个限位每一个单体U型钢模一侧壁的间隙均等距。

    youdao

  • A stop block is arranged at the base Angle of one side wall of every single-body U-shaped steel mould, and gaps between the stop blocks and the single-body U-shaped steel moulds are equidistant.

    个单体U钢模侧壁底角处,均设有限位,每个限位每一个单体U型钢模一侧壁的间隙均等距。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定