• The mold core processing all is generally the piecework .

    模具加工一般单件生产。

    youdao

  • And the convex mold core (1) is connected with the convex mold.

    通过模型芯(1)连接

    youdao

  • Mold Core inlay pieces should be of sufficient strength to prevent deformation, damage and displacement.

    模具型应有足够强度防止变形位移损坏

    youdao

  • 3 get the core length, core assembly size is determined according to the structure size of the mold core seat;

    得到长度后根据模芯结构尺寸确定模芯装配尺寸;

    youdao

  • The products or the mold core need optical mirror, CD pattern, wood grain, diamond pattern, drawing lines, diamond-shaped pattern surface;

    表面需求光学镜面CD纹、木纹石纹、拉丝纹菱形纹之产品

    youdao

  • The improved design is increased in the fixed mold core, which change first parting into second parting and demould the inverted cone mandatorily.

    改进设计主要部分增加型改成二次分型,再使倒锥部分实现强制脱模

    youdao

  • The small formation holes in the brush cover was constructed with the mold core in moving and static container, and center ingate was employed to the gating system.

    针对电刷端盖压铸件结构工艺要求,选择端盖口部大端面为动静分型面,铸件成形小孔动静模型对接组成,浇注系统采用中心道。

    youdao

  • An ejector rod and a female die are fixed at the lower part of the upper beam, and a mold core is mounted on the lower beam. The end of the mold core has at least one shoulder.

    于上架下方固定,于架梁安装有一端至少一个凸的

    youdao

  • Core print is the region added to the pattern, core, or mold that is used to locate and support the core within the mold.

    、砂芯铸模上的特定区域用来在铸模内部定位支撑砂芯。

    youdao

  • It only can separate mold from core frequently, and then conduct the assembly; positioning error is increased.

    往往只能分开成型,进行组装定位误差增加

    youdao

  • This paper mainly introduced CNC lathe processing method of the special position elliptic shape core. solve the difficult problems of mold production.

    本文主要介绍了特殊位置椭圆形状型芯的数控车床加工方法解决模具生产中的难题

    youdao

  • The structure and shaping characters of injection mold with long core get analyzed.

    分析了一种长的注射结构成型特点

    youdao

  • The new water-based mold coating for resin-bonded sand mold and core for aluminium castings has been developed.

    铸件树脂砂型研制新型水基浅色涂料

    youdao

  • The wax positive is invested with a mold made of refractory materials and heated to melt the wax, leaving a narrow cavity Between the core and the investment.

    蜡像外面披盖耐火材料制成模具然后加热使熔化,留下核心与披盖模具之间一个狭窄空腔

    youdao

  • The mold of the parts is parts of the wall, after Stripping posted on the core, the agency launched using a wall around parts wear core putt.

    模具消费制件制件,脱模在型推出机构的是接近制件壁穿型芯的推杆。

    youdao

  • Firstly, the structure of injection mold is analyzed by use of GT, mold parts are classified to 4 types of ones: cavity or core, mold plate, structure and standard parts.

    首先运用成组技术基本原理,注塑模具结构进行了分析,提出了模具零件其功用可分为型腔型模板结构件标准件等4零件的分类方法。

    youdao

  • A kind of valuable wood which is cut into a mold as the core.

    一种非常名贵木头做制成模子做芯。

    youdao

  • If a hollow casting is to be made the pattern will include extension pieces so that Spaces to accept the sand core are molded into the sand. These additional Spaces in the mold are termed core prints.

    如果铸造空心铸件时模型包含伸长杆便于中放置空间称为芯座。

    youdao

  • The test for properties showed the binders could substitute for tung oil binder to affix the class I mold and core.

    性能测试表明可以代替桐油粘结剂,用于I型芯粘结。

    youdao

  • The research of the molding system for the castable polyurethane tire is introduced, mainly including the design and development of the core mold, outer mold and rotatable frame.

    介绍聚氨酯浇注轮胎成型系统研究主要包括翻转设计研制

    youdao

  • There are two core techniques in thin slab CC:one is curved mold and the other one is liquid core reduction.

    薄板坯连铸两个主要核心技术曲面结晶器,一个是压下技术

    youdao

  • There are many special requirements for forming mold of soft magnetic ferrite I-type core in the course of the pressing.

    软磁铁氧体工型磁芯压制成型模具许多特殊要求

    youdao

  • The large, complex and irregular investment casting mold was successfully designed by property arrange technology hole for core cleaning and use combinative core.

    通过开设适当的出工艺利用组合型芯,成功地设计出了大型复杂不规则模铸件模具

    youdao

  • Using the cold core and floating mold to solve the problem that the precision of auto rubber and plastic products is so hard to guaranteed.

    采取模加工解决汽车橡塑零部件精度难以保证问题

    youdao

  • Now to put it back together and cut some basic keys in the wall to lock in the RTV core mold in it's proper position.

    现在一起削减一些基本钥匙墙上,在室温硫化模具核心,在它正确的位置。

    youdao

  • At the same time both mold making and casting core.

    同时兼有模具制做

    youdao

  • Technical analysis of injection part, determination of mold structure and the design process and core part are described. It provides a simple and economic design idea for injection mold designers.

    注塑工艺分析确定模具结构设计核心零件过程了阐述,注射模具工程设计人员提供了一种简单经济的设计思路

    youdao

  • The results show that the process is a clean process of mold and core sand foundry and does not pollute environment.

    实验结果表明工艺污染环境,造型清洁生产工艺。

    youdao

  • Adopted floating core and Angle guide pin core-pulling mechanism, production efficiency was high, it had a certain reference function to similar plastic mold.

    采用浮动抽芯机构生产效率同类注塑件生产提供有益的借鉴。

    youdao

  • The core mold made of thermal expansion silicon rubber is used with steel mold to mold CF composite products with good result.

    硅橡胶材料制作钢模组合使用制备碳纤维复合材料制件,应用效果较好

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定