By contract risk evaluation, risk disposal ability evaluation and risk strategy cost calculation, proposes the contract risk allocation model based on engineering dynastic operation.
并以合同风险评价、风险处置能力评估、风险策略成本测算为依托，提出了基于工程动态运行的合同风险分配模型。
The article sets forth the design characters, functions, data structure, model and engineering calculation of this system.
文章阐述了该系统设计的特点、功能、数据结构和模型、工程计算等问题。
Tests show that the model is precise enough for engineering approach and provides soil parameters for rheological calculation.
试验表明该模型对于工程应用是足够精确的并提供了流变计算的土壤参数。
The results accords with the designed life of the crane by and large, showing that calculation results meet required precision for engineering, and that life fatigue model is practicable.
计算结果与起重机设计寿命基本相符，表明计算结果满足工程上精度要求，该寿命模型是实用和可行的。
In the end, calculation and analysis of engineering examples indicate the primitive model and modified model are of good prediction precision and can meet the needs of engineering purposes.
最后，结合链子崖工程实例，计算分析表明原模型及残差修正模型能满足工程的需要，具有较好的预测精度。
Field application showed that the calculation method of the model is simple, and easy to apply in engineering.
应用实例表明，该模型计算方法简单，便于工程应用。
Through analytical calculation on generator dynamic transient and experiment data comparison, the model presented in the paper demonstrates high accuracy and satisfies engineering requirements.
通过发电机动态过渡过程分析计算与试验结果的比较，表明文中所提出的数学模型及其参数具有较高的精度，可以满足工程要求。
The fourth is that, The uniform calculation of the whole lifecycle engineering cost, its aim is to supply model supporting system to whole lifecycle engineering cost management.
全生命周期工程造价统一计算，它是为全生命周期工程造价管理提供模型支持系统。
The results of calculation indicate that this model is good in precision. lt will meet the needs of engineering calculation.
计算结果表明，该模型精度好，可以满足工程计算要求。
Model UNIFAC is one of the most widely used model in reckoning the component activity coefficient in nonelectrolyte solution. It is also used in engineering designing calculation.
UN ifac模型目前已成为推算非电解质溶液中组分活度系数应用最广泛的模型，并且用于工程设计计算。
An engineering model for hypersonic reentry body trail is established in this paper, and a calculation is performed by using boundary layer theory.
建立了再入体再入大气层形成的尾迹的工程模型，并运用边界层理论求解二维等压湍流尾迹流动。
The numerical calculation result of the consolidation process of warping clay in the blanket crack of a small dam is verified by model test and engineering practice.
对某水库土坝水平铺盖裂缝处淤填黏土固结过程的数值计算结果通过室内模型试验得到了验证。
This paper presents the design method of engineering design calculation model and AUTOCAD interface program and expounds I...
本文介绍了工程设计计算模型与AUTOCAD接口程序的设计方法，并结合实例阐述了其应用和意义。
This model and method can meet the needs of engineering calculation of 3-d fracture design.
该模型和方法能满足三维压裂设计的工程计算需要。
The mathematical model and calculation equations of wet-heat surface coating for fibers was established. The applicability of the model was discussed for project design and engineering application.
建立了纤维湿热表面涂覆的数学模型及衡算方程，讨论了其在项目设计和工程应用中的适应性。
The present paper deals with a reactor network comprehensive model for the engineering use orented three dimensional heat transfer numerical calculation of utility boiler furnaces.
文中介绍一种适合于工程应用的电站锅炉炉膛三维传热值计算的反应器网络综合模型；
In this paper, the author establishes a water hammer arrester mathematical model, and applies it to engineering. Optimized calculation shows that the prevention method is effective.
本文应用特征线法为常见的下开式水锤消除器建立了数学模型，并结合工程实饯对水锤消除器的选取进行了寻优计算，取到了较好的消锤效果。
Wave element is an important parameter for port engineering design and wave mathematical model analysis and calculation are key measures for wave element analysis.
波浪要素是港口工程设计重要参数，波浪数模分析计算是波浪要素分析中的重要手段。
Compared with the 2-d sediment model, the coupled model is a short-cut calculation, and the accuracy of its results can satisfy the demands of engineering application.
该模型与平面二维水沙模型相比简化了计算，且其计算精度满足工程应用的要求。
The method of establishing model in the finite element calculation can be used to the engineering calculation of machine foundations and carrying out the theoretical research.
有限元计算中提出的建模方法可以运用于机器基础的工程计算，也可运用于理论研究。
The regulation effect is predicted through preliminary design and mathematical model calculation, for the purpose of further perfecting engineering measure and improve preliminary design result.
文章通过初设和数模计算，预测整治效果，旨在进一步完善工程措施，提高初设成果。
In this paper, an engineering method is proposed for calculation of RCS for a nonmetallic wing structure model.
本文对一种估算非金属翼面结构RCS值的工程算法进行了探讨。
The experiments of tube plug drawing verified that the theoretically calculated values are identical with measured ones. Thus, this calculation model seems to be available to the engineering practice.
经与实验结果比较，理论计算值与实测值较为接近，此方法可以在工程计算中应用。
It is of great importance to obtain the reasonable results of stability analysis of rocky slope by using the engineering geological information to establish the correct calculation model.
充分利用地质资料建立正确的岩质边坡稳定性分析计算模型，对于获得正确的分析结果至关重要。
A frozen soil engineering problem of pile foundation uplift, is analyzed using fracture mechanics method, and a simplified model for calculation the stability of pile foundation uplift is presented.
对桩基冻拔的冻土工程问题进行了断裂力学分析，并给出简化模型。
Therefore the model proposed covers a rather wide range of application and its calculation accuracy can meet the general requirement of engineering design.
因此，本文提出的模型有较广的适用范围，其精度也能满足一般工程计算的要求。
An engineering equivalent model is given, as well as the corresponding calculation formulae. The impact of the g…
提出的光路噪声模型可以为光网络中光节点和光纤传输段的设计提供参考。
The numerical calculation of the statistical damage model indicates that this model is clear in theory and applicable in practical engineering.
通过对该模型的初步计算分析表明，此模型具有清晰简明的特点和一定的实际应用价值。
The numerical calculation of the statistical damage model indicates that this model is clear in theory and applicable in practical engineering.
通过对该模型的初步计算分析表明，此模型具有清晰简明的特点和一定的实际应用价值。
应用推荐