In this paper, through selecting proper material constitutive relationship and bond-slip model, 3-d finite element analysis model...
本文通过选用合适的材料本构模型和粘结滑移模型，建立三维有限元分析模型，进行全过程的模拟分析。
In this paper, the method of 2-D finite element analysis was conducted to simulate the thermal state of the roadbed with insulations on permafrost.
本文运用有限元分析方法，对多年冻土区含保温夹层的路基温度场进行了数值模拟。
Combining the engineering example of Klnbrein Arch Dam 200 m high in Austria, aimed at restriction effect between foundation and arch dam, the 3-D finite element analysis has been carried out.
结合科恩布赖茵拱坝的工程实例，就基础对拱坝坝体的约束效应进行了三维有限元分析，发现施工时预留的陡坎对拱坝坝体应力影响显著，同时建议拱坝施工时地基开挖成概化的地基界面。
In this paper, through selecting proper material constitutive relationship and bond-slip model, 3-d finite element analysis model is established, and simulate analysis in all process is completed.
本文通过选用合适的材料本构模型和粘结滑移模型，建立三维有限元分析模型，进行全过程的模拟分析。
D assembly FE modeling and dynamic elastoplastic analysis are carried out for the obturator structure of a floating gun breech mechanism by using nonlinear finite element code MSC MARC.
利用大型非线性有限元MARC ，对某自动迫击炮浮动炮闩闭气结构，进行了三维装配体有限元建模和动态弹塑性分析，获得了关键闭气构件的应力、塑性应变和变形的动态响应。
An analysis was made on the Zhougongzhai arch dam under basic load combination and overloading of hydraulic pressure by use of 3-d nonlinear finite element method.
用三维非线性有限单元法对周公宅拱坝进行了基本荷载组合下的非线性分析和水压超载分析。
By using finite element CFD analysis software POLYFLOW, 3-d transient simulations have been made on the measurement of the five kinds of pin injection screws.
运用基于有限元的C FD分析软件POLYFLOW，对五种销钉注塑螺杆的计量段进行了三维瞬态模拟。
A 3-d static and dynamic linear elastic and nonlinear finite element analysis is made on Guandi Gravity Dam.
对官地混凝土重力坝进行了三维静动力线弹性和非线性有限元分析。
The 3-d finite element model of bolt is calculated by the method of contact analysis, and the fatigue strength of bolt is checked.
并采用接触分析法对螺栓的应力应变进行了三维有限元计算，对螺栓的疲劳强度进行了校核。
This paper presents finite element analysis of non-Newtonian fluid flow in 2-D branching channel.
本文介绍二维分岔槽道内非牛顿流体流动的有限元分析。
Based on the finite element analysis for 3-d electrostatic field in the fuse-contactor, the mathematical model of inverse problem is set up.
本文以真空组合电器三维静电场有限元分析为基础，建立三维静电场边问题的数学模型。
In this thesis, finite element analysis using software ANSYS was performed to calculate 3-d temperature field of the hot roller.
本文采用大型有限元分析软件A NSYS对热轧辊三维温度场进行分析计算。
According to lifting hoist reel tube shell structure and work situation, a 3-d calculated model of tube shell has been established with finite element analysis method.
采用有限元分析方法，根据提升绞车卷筒筒壳的结构和工作情况建立了筒壳的三维计算模型。
Based on the analysis of kinematic and dynamic properties during walking, a 3-d nonlinear finite element model was developed to analyze the effect of dynamic loads on the interface stress.
该文基于患者行走过程的运动学和动力学特性，建立三维非线性有限元模型，研究动态载荷对界面压力的影响。
The 3-d finite element model is built for the modal analysis of board-level package.
建立了板级封装的三维有限元模型并进行模态分析。
Authors presented a finite element (FE) model and frequency analysis method for analyzing 3-d full-mode flutter of long-span Bridges using ANSYS software.
提出了一种在ANSYS中直接分析大跨桥梁三维全模态颤振的有限元模型和频域方法。
By using ABAQUS software package, this paper has done the 3-d nonlinear finite element analysis on the performance of cover plate connection under monotonic load.
采用通用有限元软件ABAQUS，对梁柱盖板连接在单调荷载作用下的受力性能进行了三维非线性有限元分析。
YU Fuquan. Finite Element Analysis of Structure Mechanics of Gear Pneumatic Motor [D]. Changchun: Jilin University, 2011.
[7]于福权。齿轮式气动马达结构力学有限元分析[d]。长春：吉林大学，2011。
Purpose To constructing of A Proximal femur after RSAH 3-D finite element model, and also provides an effective model for biomechanical analysis of Proximal femur.
目的：建立金属对金属RSAH术后三维有限元模型，为RSAH术骨水泥技术的生物力学研究奠定基础。
Purpose To constructing of A Proximal femur after RSAH 3-D finite element model, and also provides an effective model for biomechanical analysis of Proximal femur.
目的：建立金属对金属RSAH术后三维有限元模型，为RSAH术骨水泥技术的生物力学研究奠定基础。
应用推荐