The aging treatment had a certain degree of influence on the properties, but the influence was insignificancy.
时效处理对性能有一定程度的影响，但影响不大。
Overall steel welding machine, the vibration aging treatment, deformation and rigidity.
机床整体钢结构焊接，经震动时效处理，不变形，刚性好。
Microhardness testing during aging treatment in high purity steel bearing copper was carried out.
对经时效处理后的含铜高纯钢进行了显微硬度测试。
The present invention relates to a skin aging treatment comprising paeoniflorin as an active ingredient.
本发明涉及一种包含芍药甙作为活性成分的皮肤老化护理品。
Moreover, it is found that aging treatment has obvious effect on the martensitic transformation temperatures.
时效处理对合金的相变温度有显著影响。
The results show that the required high hardness can't be achieved after forging and solution-aging treatment.
结果发现，通过锻造和固溶时效均不能有效地达到所要求的高硬度。
The results show that the cold rolling before aging treatment can enhance the conductivity of C194 copper alloy.
结果表明，在时效处理前进行冷轧，可有效提高C194引线框架铜合金的导电性。
Both the aging treatment and metal cutting regime have great influence on surface residual stresses of machine parts.
时效处理和金属切削用量对零件的表面残余应力有着重要的影响。
The effects of pre-aging treatment on segregation behavire of Ni-based single crystal superalloy CMSX-3 were also studied.
结果表明，在固溶与时效处理中间加入预时效处理可有效消除单晶合金组织与成分的不均匀性。
Desolation transformation is an important solid phase transformation of metals, and is the theoretical basis of aging treatment.
脱溶转变是金属材料的一种重要固态转变，是时效处理的理论基础。
The thermostat is used quantitative high-pressure foaming technology, and with the high-pressure high-temperature aging treatment;
采用的是恒温高压定量发泡工艺，并经高压高温熟化技术处理；
Compared with the samples prepared by normal aging treatment, the test samples prepared by overaging treatment have better wear resistance.
采用固溶过时效处理之后，耐磨性优于正常固溶时效处理的试样。
The effects of aging treatment on the microstructure and tensile properties of 2A97 Al-Li alloy, were investigated by tensile test and TEM.
通过拉伸测试和透射电镜分析，研究时效温度和时间对2A97铝-锂合金组织和性能的影响。
The main components such as body, crossbeam, column etc. were through aging treatment, so they have good stability and high machining precision.
床身、横梁、立柱等主要部件均经过时效处理，稳定性好，加工精度高；
The appraisal result proved that, in the all kinds of aging treatment method about casts iron on engine bed, the vibration is the only green one.
评价结果证明，机床铸铁件的各种时效处理方法中，振动时效方法是唯一的绿色制造方法。
After aging treatment, the strength and elongation of welded joints under different parameters increased and their mechanical properties were similar.
对焊接接头进行人工时效后，不同热输入条件下得到的焊接接头的强度和延伸率都有明显提高。
The anisotropy during aging treatment for 2195 Al-Li alloy cold-rolling sheet is studied through tensile mechanical properties and electron fractography.
通过拉伸力学性能测试和断口形貌分析，研究了2195铝锂合金冷轧薄板的各向异性随时效时间变化的规律。
The aging treatment had a certain degree influence on the properties and microstructure of the metal mould casting, but the influence was insignificancy.
时效处理时间虽对铸件的组织和性能有一定程度的影响，但影响不大。
The effect of aging treatment on corrosion sensitivity is closely related to S' phase, the phase precipitated in grain boundary and precipitate-free zone.
在时效过程中S’析出相、晶界析出相和无沉淀析出带的变化是影响合金预拉伸厚板腐蚀行为的主因。
The microstructure and properties of chromium bronze after homogenizing treatment, solid solution and aging treatment, cool deformation and aging was studied.
研究了均匀化处理、固溶时效、冷变形时效等对铬青铜显微组织和性能的影响。
The effect of cooling regime after solid solution and aging treatment on hardness, electrical conductivity and impact toughness was investigated for Cu-Ni-Be alloy.
本文研究了固溶时效后不同冷却方法对铜镍铍合金的硬度、电导率和冲击韧性的影响。
The influence of over-aging treatment of AA2195 on the distribution of second phase particles was investigated by SEM, TEM, and electron back scatter diffraction(EBSD).
采用扫描电子显微技术（SEM）、透射电子显微技术（TEM）、背反射电子衍射技术（EBSD）等分析手段对AA2195铝锂合金过时效对析出相粒子组态、细晶组织的影响进行了研究。
Aging treatment is performed for microalloyed steel for cold hardening bolt, which can stabilize its microstructure, enhance its strength and reduce its residual stress.
冷作强化非调质钢螺栓经时效处理可以稳定组织、提高强度、降低残余应力。
The effect of aging treatment on the tensile strength, elongation, hardness and microstructure of a cobalt base superalloy used for pistons rings was investigated in this paper.
本文研究了不同热处理时效温度和时效时间对一种活塞环用钴基高温合金的抗拉强度、延伸率、硬度及组织的影响。
The results showed that multiple solution and aging treatment had a significant effect on increasing plastic property and fracture toughness, although had little effect on strength.
结果表明：多重固溶时效热处理可以显著提高合金的塑性和断裂韧度，而对强度的影响不大。
The external oxidation will lead to chromium dilution in the surface layer of alloy, and the internal oxidation will decrease the strengthening effect of solution and aging treatment.
外氧化使合金表面贫铬；内氧化将降低合金固溶时效强化效果。
The results show that multi-stage aging treatment can increase wear resistance, corrosion resistance and electrical properties of NBC alloy, but microhardness has not changing apparently.
结果表明，NBC合金经过分级时效处理后，耐磨性、 耐腐蚀性和电导率有所提高，而显微硬度无明显变化；
However, it still needs study on aging precipitation behavior and the effect of aging treatment on its performance because its service conditions are very bad in the practical production.
然而，由于实际生产中服役条件非常恶劣，该钢管时效析出行为及时效处理对其性能的影响还有待进一步研究。
Different precipitation types of carbide in the alloy are transformed in long time aging treatment, turn to M_ (23) C_6 type at lower temperature and turn to MC type at higher temperature.
在长期时效中，合金存在不同类型碳化物之间的转变，较低温度时向M _ (23) C_6型碳化物转变，较高温度时向MC型碳化物转变。
Different precipitation types of carbide in the alloy are transformed in long time aging treatment, turn to M_ (23) C_6 type at lower temperature and turn to MC type at higher temperature.
在长期时效中，合金存在不同类型碳化物之间的转变，较低温度时向M _ (23) C_6型碳化物转变，较高温度时向MC型碳化物转变。
应用推荐