Selection of master rubber and acrylic monomer was described.
对接枝母体胶料和丙烯酸单体进行了选择。
A newly developed grafting copolymer of synthetic rubber with acrylic monomer has been reported.
报道了将丙烯酸单体接枝到合成橡胶上的接枝共聚方法。
Because of its brittleness and poor compatibility, it has been modified with a soft acrylic monomer to form a corrosion protective coatings with excellent mechanical properties and appearance.
由于其脆性及混溶性差，用柔软的丙烯酸单体改性，可制得物理机械性能和外观优良的防腐蚀涂料。
A branched fluorine - containing acrylic resin has been developed through solution polymerization at normal pressure with liquid fluorine - containing acrylic acid monomer and acrylate monomers.
将液态含氟丙烯酸单体与丙烯酸酯类单体采用常压溶液聚合工艺，合成了支链含氟的丙烯酸树脂。
Acrylic resin is diluted in ethyl acetate and the remnant monomer is well separated from it by gas chromatography and is quantificationally measured by hydrogen flame ionization detector (FID).
乙酸丁酯稀释丙烯酸树脂后，用气相色谱法使丙烯酸树脂中的各种残余单体得到较好分离，再采用氢火焰离子化检测器(FID)定量测定。
Active monomer and acrylic esters were introduced to improve the thickening property and electrolyte resistance.
引入活性单体和丙烯酸酯来改善聚合物的增稠性能和抗电解质性能。
Studies were made of preparation of acrylic latex coating crosslinked at ambient temperature with diacetone acrylamide (DAAM) as crosslinking monomer and adipic dihydrazide as curing agent.
对以双丙酮丙烯酰胺（DAAM）为交联单体，己二酰肼为固化剂制备室温交联丙烯酸乳胶漆进行了研究。
This paper studies that modified emulsive acrylic pressure - sensitive cement's stripping capability is influenced by initiator, monomer and temperature.
本文研究了引发剂、单体种类、温度对水乳型丙烯酸酯压敏胶改性后的剥离性能的影响。
Acrylic acid and its ester derivatives are important raw materials for the chemistry industry, as monomer, via homopolymerization and copolymerization, it can synthetic thousands of polymers.
丙烯酸及其酯类是一类重要的化工原料，作为聚合单体可以经均聚和共聚合成成千上万的聚合物。
The grafting technology of acrylic acid monomer grafting polypropylene nonwoven fabric is explored.
本文探讨了丙烯酸系单体接枝聚丙烯非织造布的接技工艺。
Hydroxyl acrylic acid resin (HAR) with high solid and low viscosity was polymerized from an appropriate acrylic acid monomer in solution.
采用溶液聚合法合成了高固体分低粘度的羟基丙烯酸树脂(HAR)，详细讨论了引发剂、链转移剂、反应温度、溶剂等对HAR粘度的影响。
The modified acrylic resin leather finishing agent with hydroxyl silicon oil was synthesized by the condensation product and acrylic resin monomer emulsion.
缩合产物再与丙烯酸酯单体发生乳液聚合合成了羟基硅油改性丙烯酸树脂皮革涂饰剂。
Amphoteric monomer is prepared with acrylic acid, dimethylamine, and chloroethanol by Mannich reaction.
以丙烯酸、二甲胺、环氧氯丙烷为原料，通过曼尼希反应制得两性离子单体。
It was found that the monomer addition rate, acrylic acid ratio and the addition way of the monomer and initiator affect the cumulative and instantaneous conversion.
进一步研究了进料速率、进料方式、丙烯酸含量等因素对累积转化率和瞬时转化率的影响。
Synthesises rare earth complex monomer was conducted by sedimentation and direct method. The rare earth organic ionomer was synthesized by copolymerization of acrylic acid monomer.
通过沉淀法和直接法制备羧酸稀土配合物，与丙烯酸等单体共聚反应制备不同稀土含量的稀土有机高分子离聚物。
The factors affecting water absorption were studied, such as mass of initiator and cross - linker, mass ratio of starch and monomer, mass ratio of acrylic acid and acrylamide.
研究了引发剂用量、交联剂量、单体与淀粉质量比以及丙烯酸和丙烯酰胺质量比对产品的吸水率的影响。
The effects of weight ratio of hard and soft monomer, amounts of initiator, emulsifier and acrylic acid on the properties of the adhesive are discussed.
考察了聚合过程中软硬单体比例、引发剂用量、乳化剂用量以及功能单体用量对产品性能的影响。
It was shown that the addition of functional monomer methyl acrylic acid could not only improve emulsion stability but also be advantageous to formation of regular core shell structure.
结果表明：加入甲基丙烯酸有利于胶粒的稳定和形成规则的核壳胶粒。半连续加料不会形成完全反转的核壳结构，但是，核层在反应过程中由于聚合物簇的迁移会造成形变。
It was shown that the addition of functional monomer methyl acrylic acid could not only improve emulsion stability but also be advantageous to formation of regular core shell structure.
结果表明：加入甲基丙烯酸有利于胶粒的稳定和形成规则的核壳胶粒。半连续加料不会形成完全反转的核壳结构，但是，核层在反应过程中由于聚合物簇的迁移会造成形变。
应用推荐