High peel strength which builds on aging.
抗剥离强度高，随时间变化而变化；
Peel strength between aluminium and the grafted polyethylenes was measured .
其中酸酐功能化的聚乙烯与铝的粘结强度最高。
The adhesive is nontoxic and has excellent peel strength to SBS materials and leather.
所制胶粘剂对SBS材料和皮类材料具有良好的粘接效果。
Feature: Aluminum foil backing, good peel strength ANDlow tack, adaptability to weather condition ANDextreme temperatures.
特性：以纯铝箔为基材，剥离强度高、初粘性好、内聚力强、耐候性好、耐高低温性能好。
Feature:Aluminum foil backing, good peel strength and low tack, adaptability to weather condition and extreme temperatures.
特性：以纯铝箔为基材，剥离强度高、初粘性好、内聚力强、耐候性好、耐高低温性能好。
Besides, the effects of different ways of addition of the initiator BPO in the copolymerization on the peel strength are discussed.
此外，还探讨了引发剂bpo的添加方式对剥离强度的影响。
Strain, peel strength, critical buckling pressure and failure mode under various temperatures of PSP were investigated using experiments.
对钢丝缠绕增强塑料复合管应变、剥离强度、临界失稳压力、不同温度下的失效形式等进行了试验研究。
With polyether polyurethane as the main body the hot melt adhesives has good flexibility, poor adhesive peel strength and heat resistance.
以聚醚为主体的聚氨酯热熔胶虽然柔韧性得到改善，但胶黏剂的剥离强度，耐热性又较差。
Tightsen structural adhesives have excellent tensile, shear and peel strength combined with maximum impact, stress and vibration resistance.
泰盛结构胶具有较强的拉伸、剪切与剥离强度，耐冲击、耐压、抗振动。
The results showed that the double bonds were opened, and made the main chain to have high polarity. The T-peel strength was raised 71.44% after modified.
测试结果表明氧化改性后的SBS，主链的双键被打开，引入了极性基团，其T型剥离强度提高了71.44%。
The results show that there have higher peel strength between adhesive tape and polyester or polyamide. It is applicable for bonding the end of zipper cloth base.
实验结果表明，尼龙热熔胶与涤纶或尼龙布基有良好的剥离强度，可应用于拉链布基末端的粘。
The simultaneous measurement of the tensile strength, yield strength, stretching rate, elastic modulus, peel strength and power - of time, of a displacement curve.
可同时测量材料的抗拉强度、屈服强度、伸缩率、弹性模量、剥离强度及力-时间，力一位移曲线。
This paper introduces a new copper foil adhesive for bakelite paper laminate. The adhesive raises the comparative tracking index (CTI), proof welding, peel strength of the laminate.
本文介绍了一种新的覆铜板铜箔胶粘剂，应用于酚醛纸板上，具有较高的耐漏电起痕性；
Thus, there can be provided a leather-like sheet material that excels in abrasion resistance and also in peel strength and flexibility, and provided a process for producing the same.
根据本发明提供耐磨性好、同时剥离强度与柔 软性好的皮革样片状物及其制造方法。
The hot-melt moisture cure PU adhesives have been prepared. The effects of the structure of the MDI-polyether prepolymer, tackify resins on peel strength of the adhesives have been studied.
本文制备湿固型MDI- 聚醚基聚氨酯热熔胶，研究了MDI-聚醚预聚物结构、增粘树脂等对胶粘剂剥离强度的影响。
It is designed for applications that require a very fast cure at low temperatures. It can be used for high throughput production processes and applications where high peel strength is desired.
该产品具有低温快速固化的特点，适合于快速高产及需要高剥离强度的应用场合。
By modeling, the formulas for calculating the line peel-off intensity and the plane peel-off intensity were deduced, and the standard to estimate the bonding strength was put forward.
最先引入了线剥离强度和面剥离强度两个附着力性能评价参数，通过建模推导出计算公式，从而给出了附着力检测评价标准。
The peel and the adhesion strength of various solidification fraction of the ETPB were studied.
本文研究ETPB固化剂加入量对粘接和剥离强度的影响。
The results show that the joint forms which have less stress, concentration and less peel stress can raise bonding strength greatly.
试验结果表明：降低应力集中及剥离应力小的接头形式可有效地提高胶接强度。
Insulating ability and peel bond strength are two important properties for thermal insulating covering.
保温性能和剥离强力是保温被两个非常重要的性能指标。
Insulating ability and peel bond strength are two important properties for thermal insulating covering.
保温性能和剥离强力是保温被两个非常重要的性能指标。
应用推荐