• The forming mechanism of the submerged nozzle clogging is investigated.

    研究浸入式水口堵塞形成机理

    www.chemyq.com

  • The bearing steel production is delayed by the submerged nozzle clogging.

    由于生产轴承钢水堵塞,严重影响生产的顺利进行。

    www.chinamet.cn

  • Submerged nozzle must be preheated before casting. Now, burning the coal gas is the usual preheating method.

    浸入式水口以前必须进行充分预热,利用燃烧煤气烘烤水口常用的预热烘烤方式

    www.chemyq.com

  • A super-flat submerged nozzle (SEN) was developed for beam blank caster of Laigang to achieve full protection for casting.

    针对莱钢异型坯连铸机实现保护浇注要求,开发了一种超扁平形状的浸入式水口

    www.chinametaldigest.cn

  • Selecting correctly the submerged nozzle is not only concerned with property of the nozzle but also the operation conditions.

    正确选择使用浸入式水口本身性能有关外,工艺操作条件有一定影响。

    www.chemyq.com

  • The results show that the submerged nozzle ingate angle and depth of its immersion should decrease gradually with the lowering of casting speed.

    结果表明随着降低水口倾角大小浸入深度逐渐减小

    dict.cnki.net

  • Characteristics of circulating flow field in a ladle stirred by bottom blowing through submerged nozzle installed symmetrically have been studied.

    本文介绍直筒型容器熔体,轴对称浸入喷嘴搅拌所形成循环的基本特征

    dict.cnki.net

  • The clogging deposit is mainly due to the attachment of oxide particles onto the inner surface of the submerged nozzle refractory followed by sintering.

    堵塞沉积主要由于氧化物颗粒附着浸入式水口耐火材料表面,继而烧结在一起所致。

    www.chemyq.com

  • The present paper studies the effect of structure of the submerged nozzle on the flow ability of the liquid steel in the mold of the slab continuous caster.

    通过水力模型实验,研究水口结构南钢板坯连铸机结晶器内钢水流动特性影响

    www.chemyq.com

  • The results show that the configuration of submerged nozzle can effectively reduce gas velocity near the aft-dome case, and has better heat security environment.

    结果表明喷管潜入结构有效地降低发动机后封头壁面附近燃气速度,从而比非潜入发动机更好防护环境

    dict.cnki.net

  • The main reason that the submerged nozzle clogged during continuous casting of high aluminum low carbon steel is aluminate that aggraded the submerged nozzle wall.

    中薄板坯连铸机生产过程中,浸入式水口堵塞主要原因水口与钢水之间产生化学作用和钢水中的氧化铝夹杂物在水口壁上沉积。

    www.dictall.com

  • According to above analysis results, the clogging of submerged nozzle is attributed to molten steel condensation, bad protecting casting and inclusions in molten steel.

    由此分析得出钢水金属冷凝连铸保护浇铸不好钢水不洁净造成水口堵塞主要原因

    www.jmonline.org

  • It has laid the foundations for further studying the flow field in mold with mathematical models and optimizing submerged nozzle shape as well as casting process parameters.

    进一步采用数学模型研究结晶器优化伸入式水口结构工艺参数打下基础。

    dict.cnki.net

  • There are four types of the cloggings in the submerged nozzle for continuous casting. They are, namely, deoxidation products, solidified steel, complex oxides and reaction products.

    连铸水口堵塞类型四种脱氧产物、固态复杂氧化物反应产物

    dict.cnki.net

  • The results show that the effect factors of EMBr are slab width, casting speed, the shape of submerged entry nozzle and so on.

    结果表明电磁制动影响因素板坯宽度浇注速度浸入式水口的形状等。

    danci.911cha.com

  • The principles of design and evaluation for submerged entry nozzle (SEN) were put forward based on the view of establishing rational flow pattern in mold.

    建立合理结晶器内角度出发提出了结晶器伸式水口设计评价原则

    dict.cnki.net

  • In order to increase the standoff of a submerged jet, the induced-nozzle device is presented with its inducing mechanism analysed in this paper.

    为了提高淹没射流有效靶距,本文提出了诱导装置并分析了喷咀装置的诱导机理

    dict.cnki.net

  • The clogs on the submerged entry nozzle of type 304 and 321 stainless steels were investigated, and the mechanisms of clogging were discussed.

    分析了304321不锈钢连铸水口结瘤物物相,探讨了结机理

    dict.cnki.net

  • At the same time, production and processing all kinds of resistance welding electrode, submerged arc welding, conductive nozzle.

    同时生产加工各种电阻电极弧焊导电

    www.hangebuluo.com

  • The results show that the effect factors of EMBr are slab width, casting speed, the shape of submerged entry nozzle (SEN) and so on.

    结果表明电磁制动影响因素板坯宽度浇注速度浸入式水口(SEN)的形状

    www.chinamet.cn

  • A new submerged entry nozzle (SEN) with four outlets was used for casting heavy rail steel.

    针对攀钢大方坯连铸结晶器,采用孔水口注重钢。

    www.jmonline.org

  • A new submerged entry nozzle (SEN) with four outlets was used for casting heavy rail steel.

    针对攀钢大方坯连铸结晶器,采用孔水口注重钢。

    www.jmonline.org

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定