• Plastic card, plastic card producing method, hot press plate, and car producing device.

    塑料,塑料卡制造方法,用于热压制卡装置

    ip.com

  • In order to adjust the bending Angle, the T-type slide seat and bending press plate were used.

    模具采用T弯曲两边压板调节从而达到一定范围内调节弯曲角度的目的。

    rjggy.net

  • The bottom of each bin is coated with ventilative cloth which is fixed by a radial press plate.

    料仓底部敷设透气布料,并用辐射状压板固定

    ip.com

  • Where has "one ball becomes famous " anhydrous series Gao Qing press plate time be loaded with?

    哪里成名系列高清无水印下载

    www.114la.net.cn

  • The fire accident analysis of press plate filter due to static electricity was made. Its prevention measures were brought forward.

    一起静电引起框式加压油机着火事故原因进行分析,并提出防范措施

    www.chemyq.com

  • The upper press plate goes downward with two steps control can not only be safety for operator but also ensure better molding results.

    型上刀采段式行进,操作安全,鞋面中心定位准确。

    www.81bar.com

  • An adjustable moveable press plate is provided to realize wire clamping and locating. Therefore, the utility model is suitable for coil elbows of any size.

    线定位采用可调活动压板因此适用任何尺寸线圈弯头

    ip.com

  • There is great gap between theory research and current development about press plate wood vacuum dryer, especially wood vacuum drying schedule which can not meet the requirement of production.

    目前,国内对于压板式木材真空干燥机的理论研究实际还有很大的差距尤其是木材真空干燥工艺基准不能适应实际生产要求

    www.dictall.com

  • In order to adjust the bending Angle, the t type slide seat and bending press plate were used. The adjusting of bending radius was implemented by replacing the adjusting axis of bending radius.

    模具采用T弯曲两边压板调节从而达到在一定范围内调节弯曲角度目的,弯曲半径调节主要通过更换弯曲半径的调节来实现

    rjggy.net

  • The nickel shim becomes the embossing plate that is wrapped around the embossing cylinder on the foil embossing press.

    垫片成为压花,压花铝箔压花周围包裹着

    www.futaiys.cn

  • Most of prepress dept output the plate, they would not know the plate would be printed by which press.

    大多数部门输出印版并不知道印版在哪台印刷机印刷

    www.cnprint.org

  • We will be the most preferential prices to provide you with reliable quality of flat-panel curing machine parts and similar specifications of the plate curing press.

    我们优惠价格提供质量可靠平板硫化配件同类规格平板硫化机。

    danci.911cha.org

  • The process of cleaning the rollers, form or plate, and fountain of a press with solvents to remove all ink as required after a day's run, or during a run for ink color changes.

    中义工作完毕更换墨色时,溶剂清洗筒、印版印刷机的水槽洗去所残留

    www.dictall.com

  • The process of separating wax from oil by first chilling (to help form wax crystals) and then filtering under pressure in a plate and frame press.

    中分离石蜡过程首先进行冷冻(帮助生成石蜡晶体),然后框式压力进行过滤。

    www.infopetro.com.cn

  • Conventional plating methods are based on the use of an adequate number of anchoring screws to press the plate against the bone with high compressive forces, creating a stable bone-implant connection.

    传统钢板固定方法基于采用足够数量螺钉通过高压应力钢板固定于面而产生稳定骨-内植物连接

    www.jyyy.com.cn

  • Align the hex plate with the receiver on the head and gently press down until the lock clicks into place (figure 13).

    然后将六角形快装云台对应处对齐接着轻轻直到紧(图13)。

    www.kuenglish.info

  • Plate and frame filter press is a kind of universal equipment in cane sugar industry, it is used to filter tiny and sticky substance.

    压滤适用难以分离黏性物的过滤蔗糖生产企业普遍应用的设备

    www.chemyq.com

  • This article introduces the design of louver tooling for turret punch press, mainly focusing on the design and calculation of die, punch body and stripper plate.

    介绍多工位数控冲床用百页窗模具设计重点介绍了下装凸、上装镶拼凹模卸料板的设计计算方法

    www.dictall.com

  • The effects of additional friction between pin and pin-hole and of the height of pin over the press-plate surface on the practically measured values was taken into account and their corrections were

    计算中,考虑了测针孔附加摩擦力,以及测针端部凸出压板表面高度实测结果的影响,并分别进行修正。

    dict.cnki.net

  • It is showed from the actual examples that the plate shape can be the best with optimizing the press rules to make the shape ratio for every pass equaled.

    通过实际算例优化压下规程使系数相等,表明板型达到最佳状态。

    www.dictall.com

  • The mould press prebending adopts involutes types mould and simultaneously fold bending the two edges of plate by steps.

    模压式预弯采用渐开线式模具分步对钢板的两边同时进行

    dict.cnki.net

  • The plate springs of the spring-loaded clutch press the friction discs together.

    弹簧离合器板簧将摩擦在一起

    bbs.hcbbs.com

  • In all of the press, pillow as determine a printing plate cylinder and rubber roller lining of fixed base.

    所有印刷机上滚枕作为确定印版滚筒橡皮滚筒包衬固定基准

    danci.911cha.org

  • One side of the pressure plate is machined smooth. This side will press the clutch disc facing are against the flywheel.

    离合器一边光滑的,这边离合器片飞轮方向挤压。

    www.jxcad.com.cn

  • Multiple secondary operation dies to be mounted on a common plate to run in one press whenever possible. (to be determined at pre-engineering launch meeting).

    只要可能,复合二重工序模具安装一个公用的模板上同一台冲床中进行冲压。

    www.8875.org

  • Position drive plate on the crankshaft's dowel pin and press on to the crankshaft flange.

    传动安放在曲轴定位上,然后曲轴法兰上。

    www.websaru.com

  • Doctor blade: the flexible steel blade on a photogravure press which removes the surplus ink from the face of the cylinder or plate before the impression is made on the paper.

    刮墨照相凹版机上软钢刀片作用纸张清除版片圆筒上多余油墨

    www.juyy.net

  • Doctor blade: the flexible steel blade on a photogravure press which removes the surplus ink from the face of the cylinder or plate before the impression is made on the paper.

    刮墨照相凹版机上软钢刀片作用纸张清除版片圆筒上多余油墨

    www.juyy.net

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定