Based on PLC electric control system, designed a hydraulic liquid temperature control module, a limit control, an alarm and display module.
实现了对系统的液压油油温和工作中碰撞力等参数进行采集并通过人机界面显示。
A set of electric control system of unit emergency stop device controlled by PLC was designed.
设计出一套由PLC进行控制的紧急事故停机装置电气控制系统。
The constitution of the electric control system with PLC for plastic recycle plant was introduced.
介绍了用P LC控制的塑料再生生产线的电气控制系统的组成。
Aiming at the technical demand of Vacuum Casting System, the electric Control System Based on PLC is adopted.
针对真空注型系统的工艺要求，采用基于PLC的电气控制系统。
The electric part USES PLC touch screen control, hydraulic system USES an electric pump to increase screening and dedusting equipment with high degree of automation.
本机电器部分采用PLC触摸屏控制，液压系统采用电动油泵，增加过筛、除尘装置，自动化程度高。
The electric control system of this machine is made up of the Programmable Controller (PLC) and the advanced Touch-Screen (TOUCH SCREEN).
本机的电气控制系统由可编程控制器(PLC)与先进的触摸屏(TOUCHSCREEN)组成。
The movement law and electric driving system are analyzed. Variable frequency technique used in the system is discussed and PLC is used for automatic control of the pumping unit.
分析了数控抽油机的运动规律及电力拖动系统，论述了变频调速技术在系统中的应用。应用可编程控制器(PLC)完成抽油系统的自动控制。
This paper introduces the application of PLC in water supply control system, explains the design of the electric principle diagram and the system program design.
本文介绍PLC在供水控制系统中的应用，阐述了根据控制电路组成及操作工艺要求，进行的电气原理图设计和系统程序设计。
PLC was applied to rebuilt the electric control system for DF 5 locomotive.
应用PLC改造东风5型机车电气控制系统。
Based on the characteristics of electric dehydration of crude oil, a control system on PLC is designed.
从原油电脱水系统的特点出发，设计基于可编程序控制器的电脱水控制系统。
This paper has made exposition to the design process of the motor drive electric control circuit and the fluid drive PLC control system in the machine processing control system based on PLC.
对基于PLC的机加工控制系统中的电机电器控制线路和液压传动PLC控制系统的设计过程作了阐述。
The paper introduces the characteristics of the electric control system composed by PLC, and probes into the problems of PLC application through applied examples.
本文介绍了由PLC构成的提升机电控系统的特点，并通过应用实例，探讨了PLC应用中的问题。
Designs the plate cutter PLC control system including hardware electric circuit and software procedure.
设计出剪板机plc控制系统，包括硬件电路和软件程序。
This system USES PLC in railway signal system as the core controller and it replaces the additional electric centralized control mode, overcomes the disadvantages such as hugeness, low reliability.
该系统将可编程控制器用于铁路信号系统中并作为系统的核心控制器，取代了传统的电气集中控制方式，克服了其系统庞大，可靠性低的缺点。
Electric system: Adopt PLC controller which is special used to the construction machinery. It can realize gear control, overload protection for engine, state supervision and trouble indication.
电气系统：采用工程机械专用的PLC控制器，可实现档位控制、发动机过载保护、状态监控与故障提示。
Electric proportional pump-control hydraulic system controlled by PLC and CAN bus is the main format of driving control for modern heavy mobile cranes.
结合整机plc和CAN总线控制的电比例泵控液压系统是现代大型流动式起重机主要的传动控制形式。
After PLC control technology is applied, the revering program disturbance protection is realized, enabling electric control system for gas reversing machine more safe and reliable.
应用PLC控制技术后，实现了交换程序紊乱保护，使煤气交换机电控系统更加安全可靠。
This paper introduces rebuilding electric control system of portal crane drived by DC and the application of digital DC speed controller, PLC and touchable industrial graphic monitoring system.
简要介绍直流驱动的门机电控系统改造，包括数字式直流调速器、PLC和触摸式工业图形监控系统的应用。
The principle and design method of the programmable logic controller (PLC) are introduced in brief. The design strategy of the PLC-based electric control system for ENN 2mn twisting machine is stated.
首先简要地说明了可编程序控制器(plc)的原理及其设计方法，然后提出了采用PLC的ENN2MN扭拧机电气控制系统的设计方案。
In order to enhance the operational reliability of min hoister, its electric control system was reformed with PLC.
为了提高矿井提升机的运行可靠性，用P LC对矿井提升机的电控系统进行了改造。
In this article, the PLC control in the automatic grain storage control system and the correlation hardware electric circuit as well as the software design are mainly introduced.
主要介绍了PLC控制在全自动粮库控制系统应用及相关硬件电路、软件的设计。
The PLC controlled system which is used to control step-motor and electric welding machine is introduced in this paper, and automatic control of T-type channel Joints is realized.
利用可编程序控制器（PLC）控制步进电机和电焊机，实现T型管道接头焊接的自动化控制。
PLC is used in electric system for automatic control of moving, swinging, lifting, lowering operations of the works as well as time intervals between operations.
电气控制采用了PLC，对工件的运行、摆动、上升、下降等动作及间隔时间实现了自动控制。
The programmable logic controller (PLC) introduced into the electric control system in a mine hoist can enable the operation of mine hoist more safety and more reliability.
将P LC对入矿井提升机的电控系统，可使提升机的运行更加安全可靠。
Using PLC to transform electric control system can reduce accidents and raise efficiency.
采用可编程控制器对其改造，便可减少故障，提高开机率。
Using PLC to transform electric control system can reduce accidents and raise efficiency.
采用可编程控制器对其改造，便可减少故障，提高开机率。
应用推荐