A novel micro electrical discharge machining (EDM) method is described.
论述了一种新的微细电火花加工方法。
Pulse generator is the key technology for electrical discharge machining (EDM).
脉冲电源是电火花加工的关键技术。
There is machining error in electrical discharge machining (EDM) due to the electrode's orbiting.
在电火花成形加工（E DM）中，电极的平动产生了加工误差。
A new method of ultrasonic vibration electrical discharge machining in gas is proposed in this paper.
介绍一种新的气体超声波振动电火花加工方法。
The research on the technologies of micro wire electrical discharge machining (micro-WEDM) was presented.
为进一步研究气中电火花线切割加工工艺规律提供了理论依据。
The core technique problems during wire cut electrical discharge machining in the inner conductor sheet were analyzed by this paper.
分析了板线内导体在利用数控电火花线切割加工中所遇到的工艺技术难题。
The forming mechanism of different micro structures fabricated by micro electrical discharge machining (EDM) deposition was studied.
对微细电火花沉积加工中沉积所得不同微细结构的成形机理进行了研究。
The article analyzes the characteristic and the working condition of the cutting fluid using in electrical discharge machining (EDM).
分析线切割工作液的工作特点及工作状态，从生产实践中总结出科学合理选择使用工作液的方法。
Air mixed Electrical Discharge Machining is a new method of EDM, this is method of making minor air bubbles contained in the kerosene.
混气电火花加工是在煤油工作液中混入空气的一种新型的电火花加工方法。
The effect of particles on the electrical discharge machining (EDM) and cutting property of silicon nitride-based composites was analyzed.
分析了颗粒复合对氮化硅基陶瓷复合材料的火花放电加工性及切削性能所起的作用。
The influence of peak current on finishing high-speed wire electrical discharge machining (WEDM) in gas and emulsion dielectric is studied.
研究了在大气和乳化液两种介质中，峰值电流对高速走丝电火花线切割加工的影响。
The newest trends of electrical discharge machining (EDM) including die-sinking EDM, micro EDM and wire EDM (WEDM) in Japan were presented.
综述了日本在放电加工领域的最新研究动态，包括成形放电加工、微细放电加工和线切割放电加工三部分内容。
Voltage between tool and workpiece is an important parameter in the on line monitoring of wire electrical discharge machining (WEDM) process.
电火花线切割加工时工具(电极丝)和工件之间的放电电压是对放电加工过程进行实时检测的重要参数。
The paper deals with a linear direct drive mechanism of electrode for electrical discharge machining (EDM) and its drive and control principle.
在介绍椭圆微驱动电火花加工机理的基础上，分析了椭圆微驱动器对驱动电路的要求。
The temperature fields during ultrasonic vibration aided electrical discharge machining in gas are simulated with ANSYS method and FEM software.
用ANSYS以有限元软件对超声振动辅助气中放电加工过程的温度场进行了数值模拟。
Abstract: The paper deals with a linear direct drive mechanism of electrode for electrical discharge machining (EDM) and its drive and control principle.
文摘：在介绍椭圆微驱动电火花加工机理的基础上，分析了椭圆微驱动器对驱动电路的要求。
The dimensional accuracy of electrical discharge machining(EDM) is greatly influenced by the overcut resulting from the discharge gap and electrode wear.
电火花加工工件的尺寸精度受过切量影响，而过切量的大小主要取决于放电间隙和电机损耗。
The machining precision and surface quality are introduced in electrical discharge machining and their causes as well as improved measures are put forward.
介绍了电火花加工中常见的加工精度和表面质量问题以及产生的原因及相应的改善措施。
This paper develops the CNC system of precision electrical discharge machining (EDM) machines tool which consists of computer and single chip microcomputer.
本文论述了我们研制的用系统机和单片机组成的精密电火花加工机床数控系统。
In order to study the mechanism of electrical discharge machining (EDM), the energy distribution of cathode and anode was calculated based on photon emission.
为了研究电火花加工过程的机理，基于光子发射计算了阴极、阳极的能量分布。
A new WEDM (Wire Electrical Discharge Machining) technology for finishing cut has been developed, in which gas has been used as a dielectric instead of water.
用气体介质代替液体介质，开发出了一种新型的电火花切割精加工工艺。
The processing of deep hole can adopt electrical discharge machining under present condition and self-fabricate relevant facilities to meet parts requirements.
深小孔的加工，可采用高速电火花加工，在现有条件下，自制相关的工装，达到零件要求。
From the point of improving process efficiency and process quality, the characteristic in the process course of electrical discharge machining (EDM) was analyzed.
从提高系统的加工效率和加工质量角度出发，首先分析了电火花加工过程的特点。
Electrical discharge machining has proved especially valuable in the machining of super-tough, electrically conductive materials such as the new space-age alloys.
电火花加工法对加工超韧性的导电材料(如新的太空合金)特别有价值。
Tool electrodes are very important factor in electrical discharge machining (EDM). The properties of electrode materials have a great influence on EDM performance.
工具电极是电火花加工中非常重要的因素，电极材料的性能对电火花加工性能具有很大影响。
The accurate analysis method of performances plays an important role in the optimization with multiple performance objectives of micro electrical discharge machining (EDM).
加工工艺参数准确合理的分析方法是优化组合电火花微细加工中多目标工艺参数的重要前提和保证。
The accurate analysis method of performances plays an important role in the optimization with multiple performance objectives of micro electrical discharge machining (EDM).
加工工艺参数准确合理的分析方法是优化组合电火花微细加工中多目标工艺参数的重要前提和保证。
应用推荐