And bearing steel double row angular contact bearing.
以及轴承钢双列角接触轴承。
Vertical or horizontal layout, full load-bearing steel frame design.
立式或卧式布置，全承重钢架设计。
Applicable bearing steel, stainless steel special cast iron grinding.
适用于轴承钢，不锈钢和特种墨铸铁的磨削。
The bearing steel production is delayed by the submerged nozzle clogging.
由于生产轴承钢水口的堵塞，严重影响生产的顺利进行。
High quality bearing steel is selected to prolong the beering's service life.
轴承选用精制轴承钢，使用寿命长。
The effect of heating process on surface oxidation of copper-bearing steel was studied.
研究了加热工艺对含铜钢表面氧化的影响。
Most of these materials, colors look pale, but a dedicated partial bearing steel color is green.
而这些材料外观颜色大多发白，而专用的轴承钢的颜色是偏绿的。
This paper analyzes the current situation and technical characteristics of bearing steel smelting at home and abroad.
分析了国内外轴承钢冶炼的现状和技术特点。
In this paper the annealed structure and its grade of bearing steel with abnormal original structure have been studied.
本文研究了非正常原始组织的轴承钢，退火后的组织及其评级问题。
An overall chromium coating improves the corrosion resistance of the generally used through-hardening rolling bearing steel.
一个总铬涂层提高了耐腐蚀性能的普遍使用，通过硬化滚动轴承钢。
The present situation of producing, standard, quality and extend producing licence for bearing steel in China was summarised.
综述了目前我国轴承钢生产、标准、质量现状和生产许可证发放情况。
Material: low carbon steel, carbon steel, stainless steel, bearing steel, alloy steel, free cutting steel, copper and aluminum.
产品材料：低碳钢、中碳钢、不锈钢、轴承钢、合金钢、易切削钢、铜、铝等。
The simulation of controlled hot rolling process of bearing steel (GCr15) has been realized by use of hot torsion test equipment.
用热扭转试验机，实现了热变形模拟轴承钢控制轧制工艺。
The yield strength of vanadium bearing steel improves at lower temperature because of low phase transformation starting temperature.
含钒钢因相变开始温度低，其屈服应力快速增加的温度较低。
In this paper, the effects of grinding fluids are discussed experimentally on ground surface quality of the roller bearing steel GCr15.
本文讨论了在外圆磨床上进行切入式磨削时，各种切削液对滚动轴承铜磨削表面质量的影响。
The headstand wire drawn machine is a suitable equipment for the production of heavy coil bearing steel wire for high speed cold heading.
大盘重高速冷镦机用轴承钢丝的生产，用倒立式拉丝机是比较合适的选择。
The effect of basicity of top slags on oxygen content in steel and desulphurization rate during smelting bearing steel has been analyzed.
分析了轴承钢冶炼过程中顶渣碱度对钢中氧含量和脱硫率的影响。
In installation, the positioning axis of the foundation and the bearing steel cylinder elevation exceed the allowable value of the standard deviation.
在安装方面上，基础的定位轴线和支承钢柱面标高超过规范允许偏差值。
General loading condition of rolling mill bearings is medium - heavy load and shock load, thus the most suitable material is carburising bearing steel.
轧机轴承一般载荷条件是中重载荷和冲击载荷，因此，最适用的材料为渗碳轴承钢。
The requirement of producing high quality carbon construction steel, pinion steel, bearing steel, low-alloyed high tensile steel, low-alloyed hardened and tempe…
能满足转炉生产优质碳素结构钢、齿轮钢、轴承钢、 低合金高强度钢、低合金调质钢、 非调质钢等钢种的需要。
This paper deals mainly with the formulation, processes and microstructure of the diffusion Vanadium-coating with powder on the journal bearing steel of cone bits.
本文着重研究了牙轮钻头轴承用钢的粉末渗钒配方、工艺和渗层的组织结构。
Finish rolling temperature showed great effect on yield strength and impact toughness of low V-bearing steel, but showed no obvious effect to the high V-bearing steel.
终轧温度对低V钢的屈服强度和韧性存在显著影响，但对高V钢的组织性能影响不大。
This research studies the effect of different carbon and chrome content on the microstructure, carbides, hardness and contact fatigue life of the stainless bearing steel.
通过试验研究了不同碳、铬含量对不锈轴承钢的显微组织、碳化物、硬度和接触疲劳寿命的影响。
Titanium nitride(TiN) hard protective films were fabricated on AISI52100 bearing steel surface employing plasma immersion ion implantation and deposition(PIIID) technique.
用等离子体浸没离子注入与沉积（PIIID）复合强化新技术在AISI52100轴承钢基体表面成功合成了硬而耐磨的氮化钛薄膜。
The results show that suspension casting can make the temperature field uniform, eliminate macro segregation of c, s and p, and improve the quality of bearing steel ingot.
结果表明，悬浮浇注能有效地改善轴承钢锭的温度分布，极大地改善钢锭横截面上的碳、硫、磷元素的中心偏析，提高了轴承钢锭的质量。
Provide long-term bearing steel, materials and crusher before the board, moving the jaw of the same, can be equipped with bearings. Welcome to buyers consult the discussion!
长期提供铸钢轴承座，材质与破碎机前板、动颚同质，可配轴承。欢迎买家咨询洽谈！
PCBN cutters are used for rough and fine processing various of bearing steel, tool steel, chilled steel, and other many kinds of cast steel and carbide of different hardness.
PCBN刀具适合各种轴承钢、工具钢、淬火钢以及各种高硬度铸铁、喷涂、硬质合金的粗精加工。
PCBN cutters are used for rough and fine processing various of bearing steel, tool steel, chilled steel, and other many kinds of cast steel and carbide of different hardness.
PCBN刀具适合各种轴承钢、工具钢、淬火钢以及各种高硬度铸铁、喷涂、硬质合金的粗精加工。
应用推荐