The bus by the data bus, the address bus and control bus composition.
总线由数据总线、地址总线和控制总线组成。
This is not possible with a Von Neumann single-address bus architecture.
这是不可能的了冯诺伊曼单地址总线架构。
The address bus specifies the memory locations (addresses) for the data transfers.
地址总线为数据传输指明内存位置(地址)。
The actual address that is placed on the address bus when accessing a memory location or register.
当访问内存位置或寄存器时，在地址总线上的真实的地址。
Thee actual address that is placed on the address bus when accessing a memory location or register.
当访问内存位置或寄存器时，在地址总线上的真实的地址。
A memory address consists of binary data being output on an appropriate bus which we call the address bus.
一个存储器地址是由输出到适宜的总线上的二进制数据所组成。这个总线我们称为地址总线。
The address bus is used by the processor to select aspecific memory location or register within a particular peripheral.
地址总线被处理器用来选择在特定外设中的存储器地址或寄存器。
A "real" address the value that must be placed on the system address bus to select a physical memory bank or device.
物理地址：真实的地址，其值必须被置于系统地址总线中用于选择物理存储位置或者设备。
The bus is the computer parts connected by a bunch of public signal, address bus, data bus and control bus composition.
总线是连接计算机各部件的一簇公共信号线，由地址总线、数据总线和控制总线组成。
The address bus is used by the processor to select a specific memory location or register within a particular peripheral.
地址总线被处理器用来选择在特定外设中的存储器地址或寄存器。
Once you begin adjusting GTLREF voltages (for each core data and address bus) you will find that different bus frequencies respond differently to variations in the voltage.
一旦你开始调整GTL ref电压(单独针对每个核心数据和地址总线)你将会发现不同的总线频率需要不同的电压组合。
The irredundant sorting bus encoding method reduces the power dissipation of highly capacitive memory address bus based on the dynamic reordering of the modified offset address bus lines.
提出了一种新的低功耗非冗余排序总线编码方法，通过对改进的偏移地址线的动态重排以降低具有高负载的地址总线的功耗。
The memory system of dual channel A/D automatic acquisition is studied in this paper. Using transceivers and gating controllers, the data bus and address bus of RAM are respectively controlled.
本文研究了双通道A/D自动采集存储系统，利用数据收发器及数据选通控制器分别控制RAM的数据线及地址控制线。
The only change required from the client is to change the URL address from the real service to the service destination in the bus.
客户机所需的唯一变化就是将url地址从真实的服务改变为总线中的服务目的地。
Notice that the address location is an address on the bus, which is generated based on the endpoint listener and inbound service name.
请注意，地址位置是总线上的一个地址，它基于端点侦听器和入站服务名生成。
On a write, the DIF is generated by the host bus adapter (HBA), based on the block data and logical block address.
在写数据时，主机总线适配器(HBA)根据块数据和逻辑块地址生成dif。
TheBus.PackageTrackingDestinationInboundServiceService.wsdl defines the service and port with the endpoint address for the endpoint listener on the bus.
wsdl在总线上定义服务和端点侦听器的端口及端点地址。
Create a class named route to represent a route, and a class named address that represents an address, such as the starting point of a bus route.
创建一个名为Route的类，用来表示路线；一个名为address的类，用来表示地址，比如公共汽车路线的起点。
A service-bus address representing the location of the service that supported the required interface was passed to the proxy object, along with a service-bus object so that it could send messages.
服务总线地址表示支持所需接口的服务的位置，该地址与服务总线对象一起被传递给代理对象，以使它能发送消息。
A: Excuse me, will this bus take me to this address?
请问，坐这趟车能到这个地址吗？
Others have DMA engines which need to know the real address on the bus.
另外一些带有dma引擎的设备需要知道总线上的真实地址。
Service virtualization patterns encapsulate the narrower definition of a service bus and are typically used to address a number of distinct requirements, including.
服务虚拟化模式封装了范围相对较窄的服务总线定义，通常用于处理一系列截然不同的需求，包括。
If you have an existing client that calls the Web service, the only change required would be to change the URL address from the real service to the service in the bus.
如果有一个调用Web服务的现有客户机，所需的唯一改变就是将实际服务中的URL地址更改为总线中入站服务的URL地址。
The bus Invoker module sends the SOAP message to the Web service provider using the endpoint address in the WSDL file.
总线Invoker模块通过WSDL文件中的端点地址将SOAP消息发送到Web服务提供者。
Note that a dedicated bus does not need address lines because the source and destination are addressed by implication.
注意，由于在专用总线中，源和目的地址是隐含的，所以不需要地址线。
The code below show address assignment for devices attached to the external bus with the chip select number encoded into the address.
下面的代码展示了设备连接至外部总线并将其片选号编码进地址的地址分配。
Select the bus address used to detect the drive (use arrow keys).
请选择用于检测驱动器的总线地址(使用箭头键)。
Select the bus address used to detect the drive (use arrow keys).
请选择用于检测驱动器的总线地址(使用箭头键)。
应用推荐