go top

compression molding

  • 压缩模塑法

网络释义专业释义英英释义

  压缩成形

... rotary forging反转辗转锻造 compression molding压缩成形 rotational molding离心成形 ...

基于1172个网页-相关网页

  模压成型

黏度对环氧树脂基复合微发泡材料结构的影响研究 关键词:环氧树脂;黏度;微孑L;模压成型;发泡质量 [gap=1204]Keywords:Epoxy Resin;Viscosity;Microcellular;Compression Molding;Foam Quality

基于680个网页-相关网页

  压缩成型

热压成型有时亦可划分为 真空成型(vacuum forming),与压缩成型compression molding),其施压方式不尽相同。压缩成型大部份是将塑料置于模具加热软化后,再施加压力以成型。

基于198个网页-相关网页

  压缩模

... compression molding 压缩模 compression ratio 压缩率 compression set 压缩永久变形 ...

基于130个网页-相关网页

短语

injection compression molding 注塑压缩成型 ; 笺笺注塑压缩成型

Compression Molding Pressing 压缩成型 ; 紧缩成型

compression molding machine 压塑机

compression molding engineer 压塑工程师

rotary compression molding press 旋转式压缩成型机 ; 详细翻译

compression molding press 压力成形机 ; 平板硫化机

Hot Compression Molding 热压成型法

compression molding method 圧缩成形法

compression molding material 压塑料 ; 压塑料英语

 更多收起网络短语
  • 模压成型 - 引用次数:7

    Graphite/polymer composite plate was manufactured using compression molding with one-step which decreases the processing cost.

    采用一步模压成型工艺制备复合板,降低了双极板的加工成本。

    参考来源 - 石墨/酚醛树脂复合材料双极板研究
    压缩模塑 - 引用次数:4

    GMT has high specific strength as well as excellent impact strength and can be made into large size complex component by compression molding. It has broad applications in automobile industry.

    GMT的比强度高,抗冲击性优异;采用压缩模塑工艺,GMT片材可以制造尺寸大、稳定性好、形状复杂的部件,在汽车制造上有广泛的应用前景。

    参考来源 - PP/GMT模塑成型工艺研究——国产悍马军车挡泥板成型
    压缩成型 - 引用次数:2

    参考来源 - 食用菌液压成型机及其工艺的设计研究
    压缩成形
  • 模压法 - 引用次数:4

    参考来源 - 木塑复合材料注射成型的研究进展
    模压成型 - 引用次数:2

    In this paper, the idea was raised that preparing Microporous low density polyethylene(LDPE) by N2-filled hollow glass beads as novel gas carriers and LDPE as matrix, and by physics foam and compression molding.

    本文提出了以低密度聚乙烯(LDPE)为基体,以充满N_2的空心玻璃微珠为气体载体,采用物理发泡模压成型工艺制备微孔LDPE塑料的方法。

    参考来源 - 以空心玻璃微珠为气体载体制备微孔聚乙烯
    压缩成型
  • 压缩成型 - 引用次数:2

    参考来源 - 基于有限元模拟分析的生物质压缩成型机的研发

·2,447,543篇论文数据,部分数据来源于NoteExpress

Compression molding

  • abstract: Compression molding is a method of molding in which the molding material, generally preheated, is first placed in an open, heated mold cavity. The mold is closed with a top force or plug member, pressure is applied to force the material into contact with all mold areas, while heat and pressure are maintained until the molding material has cured.

以上来源于: WordNet

双语例句

  • What is compression molding?

    压塑成型什么?。

    3g.en8848.com.cn

  • The Optimization objective function of the biomass Compression molding process had been made.

    提出了种生物质压缩成型过程优化目标函数

    danci.911cha.org

  • Compression molding distributes the EVA foam within the midsole to areas that need the most cushioning.

    压缩注塑可以将中EVA泡沫分布在需要最多缓冲区域

    bbs.runbible.cn

更多双语例句
$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定