Application Working fluid (dielectric) for electrical descharge metal working.
用途作为火花机电蚀工序的绝缘工作液。
Heat pipe is an efficient heat transfer device by means of the phase transition of the working fluid.
热管是一种利用工质相变进行热量传递的高效传热元件。
For on-line calibration system of flowmeter, the working fluid flow is from the petroleum pipe line itself.
体积管工作时的液流，对于流量计在线检定系统，是来自输油管线本身。
The liquid LQ may be a working fluid used by a hydraulic bearing or a machining fluid used by a machine tool.
液体LQ可以是液压轴承所使用的工作流体或机床所使用的加工流体。
Two-stage heat pump system is an important research direction which can acquire high temperature working fluid.
双级热泵系统是获得高温工质的一个重要研究方向。
This paper makes a comprehensive survey of the hydraulic system which uses only sea-water or water as working fluid.
海水液压系统仅使用海水或普通水作为工作介质，它较之普通油压系统优点甚多。
When machining, the tool is driven by a motor to rotate, and the working fluid is sprayed upon the tool and workpiece.
加工时，工具通过一电机驱动旋转，工作液淋喷在工具和工件上。
It is found that the performance of the cryocooler has relation with the thermodynamic properties of the working fluid.
结果发现，脉管制冷机的性能与其工质的热物性有很大关系。
It consists of a compressor, a condenser, a throttle or expansion valve, an evaporator, and a working fluid (refrigerant).
它由压缩机、冷凝器、节流阀或膨胀阀、蒸发器，以及一种工作流体(冷冻剂)组成。
Deionized water and tap water with different ion concentration and electrical conductivity were used as the working fluid.
所采用的极性流体是具有不同离子浓度和导电率的去离子水和自来水。
For serious formation leakage, the working fluid can't carry sand column to ground surface in the process of sand washing.
由于地层漏失严重，作业冲砂施工过程中工作液无法将井筒内的砂柱携出地面。
The computational fluid dynamics model of a swirl nozzle is established with the water as the working fluid of atomization.
以水为流体介质，建立了旋流喷嘴的计算流体动力学模型。
Core flow simulation test is a kind of effective method to screen out and evaluate the working fluid system and operational procedure.
岩心酸化流动模拟试验是室内筛选评价工作液体系和注液程序的有效方法。
CSP systems capture and focus the sun's rays, using mirrors, to heat a working fluid to high temperatures and use it to drive a turbine.
CSP系统通过镜面收集和聚焦阳光束，以光来高温加热液体，再用液体驱动汽轮机。
The heat from the water is transferred to a working fluid, which boils at a low temperature, which spins a turbine to create electricity.
水中的热量转化为低温沸腾的工作流体推动涡轮机产生电力。
Gas (working fluid) from entering the spiral cavity suction tank by compression and exhaust through the exhaust orifice discharge cavity.
气体(工质)由吸气腔进入螺槽内，经压缩后通过排气孔口和排气腔排出。
The flow path portion causes the working fluid condensed in the condenser portion to the liquid phase to flow to the evaporation portion.
流路部，其使所述工作流体在所述冷凝部冷凝到液相以流到所述蒸发部；
But there are materials that can directly convert heat into electricity without running some working fluid through a traditional generator.
而现在有种材料，无需工作流体通过传统发电机就可以直接将热能转化为电能。
To enhance the performance of a thermoacoustic prime mover, a series of experiments were conducted by using He-Ar mixture as working fluid.
为提高热声发动机的热力性能，采用氦-氩混合工质对一台驻波型热声发动机进行了无负荷工况的试验研究。
The relation between the optimal efficiency and power output of the engines for an ideal or van der Waals gas as a working fluid is derived.
导出这类热机以理想气体或范德瓦耳斯气体为工质时的最佳效率与输出功率间的关系。
Heat transfer in rectangular pipe with longitudinal vortex generators were investigated under transitional flow using water as working fluid.
将纵向涡强化换热技术应用于矩形管槽，研究以水为换热介质在过渡流状态下的换热效果。
The electromachining equipment made according to the present invention is comprised of: machine tool, power supply unit and working fluid system.
根据本发明的电加工设备包括：机床、电源装置和工作液系统。
The condenser portion communicates with the evaporation portion, and causes the working fluid to condense from the vapor phase to the liquid phase.
冷凝部，其与所述蒸发部连通，并使所述工作流体从汽相冷凝到液相；
The COP of conventional trans critical carbon dioxide air conditioning cycle depends strongly on the working fluid temperature at the gas cooler outlet.
常规跨临界二氧化碳空调循环的性能系数对气体冷却器出口工质温度十分敏感，该温度越低，同等条件下性能越好。
From basic thermophysical laws, a steady distributed parameter model of an air-conditioning condenser was constructed, in which R22 was taken as working fluid.
以r22为制冷工质，根据质量守恒、动量守恒和能量守恒等热力学基本定理建立了空调冷凝器的稳态分布参数模型。
The experimental investigation on the low pressure spray characteristics of swirl pressure nozzle was carried out with the water as the working fluid of spray.
以自来水为喷淋介质，对旋流压力式喷嘴低压喷淋特性进行试验研究。
The piston is the heart of diesel engine, because it interacts with the working fluid to perform the key step of converting thermal energy to mechanical energy.
因其与工作流体相互作用，完成将热能转换成机械能这一重要步骤，所以活塞是柴油机的心脏。
The loss are divided into the loss by the changing of fracture width and the loss from fracture face to matrix, and the loss model of working fluid is established.
将钻井完井过程中的漏失分为由裂缝宽度变化引起的漏失和裂缝面向基块的漏失两部分，建立了工作液漏失模型。
The loss are divided into the loss by the changing of fracture width and the loss from fracture face to matrix, and the loss model of working fluid is established.
将钻井完井过程中的漏失分为由裂缝宽度变化引起的漏失和裂缝面向基块的漏失两部分，建立了工作液漏失模型。
应用推荐