With good wear resistance and corrosion resistance, micro-cracks criss-cross network to strengthen the film's adhesion.
纵横交错的微裂纹网络,增强油膜的附着能力。
The modified MC Nylon pipe has superior wear resistance and corrosion resistance and better physical and mechanical properties.
研制的MC尼龙管具有优异的耐磨性、耐腐蚀性及较好的物理力学性能。
For improving wear resistance and corrosion resistance of materials, and decreasing the cost, Arc spray technology combined by powder was developed.
为了提高材料的耐磨、耐蚀性能,并降低生产成本,开发了粉末复合电弧喷涂技术。
Results indicated that wear resistance and corrosion resistance of black TiN coating were higher than that of black oxide film or phosphatizing films.
结果表明,其耐磨损、耐腐蚀性能均高于氧化和磷化黑色膜层。
The hardness, wear resistance and corrosion resistance of the ball were significantly increased after the treatment of HLPIII, and had better uniformity.
球经高频低压等离子体浸没离子注入及氮化处理后,样品表面的硬度、耐磨性和耐腐蚀性显著提高,具有较好的均匀性。
The metal dishware has the advantages of high intensity, high wear resistance and corrosion resistance, simple process, environment protection and energy conservation.
该金属餐具具有高强度、高耐磨性和抗腐蚀性能,工艺简单、环保、节能。
SEM (scanning electronic microscope) was adopted to observe the morphologies of the oxidized alloys. The wear resistance and corrosion resistance property were assessed.
采用扫描电子显微镜对膜层进行了形貌分析,并对氧化处理前后样品的耐磨性和耐蚀性进行了测试分析。
The rest is Fe. 3) Coats getting directly by hot spraying are composite materials of amorphous and nanocrystalline, which have both wear resistance and corrosion resistance.
该涂层为既有非晶又有纳米晶结构的复合涂层,同时具有纳米 结构涂层耐磨损和非晶涂层耐腐蚀的特点;
The results showed that the addition of oxidizing gas as well as later stage oxidizing and salt bath processing were beneficial to increase the wear resistance and corrosion resistance.
试验结果表明添加氧化气及进行后期氧化盐浴处理均有利于耐磨性和抗蚀性能的提高。
By using the laser cutting method, the screen pipes with arbitrary slot pattern can be machined, and the wear resistance and corrosion resistance of the pipes can be improved owing tot…
用激光不但可切割出任意缝型结构和布缝状态的筛管,而且在切割面上形成了较厚的硬化层,可增强割缝的耐磨性和耐腐触性,延长筛管使用寿命。
Black tin coating was prepared by multi-arc ion plating technology and wear resistance corrosion resistance heat-proof property and absorption property of solar spectrum were also discussed.
摘要介绍了利用多弧离子镀工艺制备黑色氮钛膜,并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
Black tin coating was prepared by multi arc ion plating technology, and wear resistance, corrosion resistance, heat proof property and absorption property of solar spectrum were also discussed.
介绍了利用多弧离子镀工艺制备黑色氮钛膜,并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
Hardness and consequently wear resistance of austenitic stainless steel can be highly increased, without loosing corrosion resistance by producing plasma nitrocarburizing surface layers.
奥氏体不锈钢通过等离子氮碳共渗可显著提高其表面硬度,从而提高耐磨性而又不损害其抗腐蚀性能。
Chromium can improve the steel's quenching and wear resistance, can improve the corrosion resistance and oxidation resistance of steel.
铬能进步钢的淬透性和耐磨性,能改进钢的抗腐蚀才能和抗氧化效果。
It is found that the microcrystals and amorphous phases in the microstructure of the coating play key role in its wear-resistance and corrosion-resistance.
涂层微观组织分析表明,涂层组织中的微晶和非晶相对涂层的耐磨性和耐腐蚀性都有重要的意义。
The results show that multi-stage aging treatment can increase wear resistance, corrosion resistance and electrical properties of NBC alloy, but microhardness has not changing apparently.
结果表明,NBC合金经过分级时效处理后,耐磨性、 耐腐蚀性和电导率有所提高,而显微硬度无明显变化;
Properties of electroless nickel deposits and factors influencing corrosion resistance, hardness and wear resistance of the film were described.
概述化学镀镍层的性能,影响镀层耐蚀性、硬度和耐磨性能的各种因素。
The coating made by this method exhibits good coherence, excellent corrosion resistance, wear resistance and has wide application in future.
该方法所得涂层结合强度高,耐蚀、耐磨性好,具有广阔的应用前景。
The obtained stainless steel colored film is bright and beautiful, assuming the golden color, which has excellent corrosion resistance, wear resistance and good adhesive power.
所得到的不锈钢着色膜光亮美观,呈金黄色,具有优良的耐蚀性、耐磨性和良好的附着力。
The hardness, Young's modulus, wear resistance, and corrosion resistance of the coating are higher due to the recombination action of amorphous and inter-metallic compounds.
在非晶相和金属间化合物复合作用下,复合涂层具有高的硬度、弹性模量、耐磨性和耐蚀性。
This article intorduces briefly a new kind of composite which has a lot of advantages such as wear-resistance, thermal isolation, corrosion resistance, high strength, and light weight, etc.
新型复合材料具备耐磨损、隔温、防腐蚀、强度高、重量轻等多种优点,是现代交通工具上应用的理想材料。
Adapt to a wide range of its products with high strength, low elongation, wear resistance, corrosion resistance, smooth, soft and easy to operate and so on.
其产品适应范围广,具有强力高,伸长低,抗耐磨,耐腐蚀,光滑柔软,便于操作等优点。
The results show that electroless nickel copper phosphorus alloy deposits obtained have improved corrosion resistance, appearance, adhesion, porosity, deposition rate, hardness and wear resistance.
结果表明,所得镍-铜-磷合金镀层的耐蚀性、外观、结合力、孔隙率、沉积速度、硬度和耐磨性等性能优于镍-磷合金及前人制得的镍-铜-磷合金镀层。
The special characteristics of these products are the corrosion-resistance and wear- resistance thermometer protecting tube is used.
本产品的特点在于采用了耐腐、耐磨温度计套管。
The results show that a compound layer with good wear-resistance and corrosion resistance can be gained in 304 austenitic steel by chromizing sbusequent solid soluti…
结果表明,304奥氏体不锈钢经渗铬固溶渗氮复合处理后可获得性能优良的复合渗层,且耐磨、耐腐蚀。
Roll collar, needing not only high strength and wear resistance but also thermal fatigue resistance and corrosion resistance, was one of the components which were damaged easily in rolling process.
轧辊不仅需要具备高强度和高耐磨性,还必须具有高的抗热疲劳强度和耐腐蚀性以及抗氧化性,是轧钢行业的主要消耗件之一。
Therefore, this valve has a very high wear resistance, corrosion resistance, erosion resistance, and good insulation, thermal expansion.
因此,本阀具有极高的耐磨损、耐腐蚀、耐冲蚀性能,且隔热性好、热膨胀小。
Therefore, this valve has a very high wear resistance, corrosion resistance, erosion resistance, and good insulation, thermal expansion.
因此,本阀具有极高的耐磨损、耐腐蚀、耐冲蚀性能,且隔热性好、热膨胀小。
应用推荐