Mainly used to test the radial error, end face run-out, and roundness of axes and dicks.
主要用于轴类、盘类零件的径向、圆度及端面精度的检测。
Bearing bore or outside the surface and the ferrule end face connected to a ring surface.
轴承内孔或外表面与套圈一端面连接的套圈表面。
Erect the electric engine on the supporting foundation, make the output end face down, and suspend.
将电机直立在支座上，使机轴输出端向下，且悬空。
By means of optical grinding and cutting optical fiber end face, it can access clean fiber end face.
通过光学研磨、端面切割等手段对光纤端面进行加工，获得平整光洁的光纤端面。
Cylinders, straight cups, and flaring cups are used for surface grinding with the end face of the wheel.
用其端面进行表面磨削的圆柱、直杯及外展杯状砂轮。
With the face grinding attachment , perpendicularity of the end face to the bore after grinding can guaranteed.
带有端磨装置，保证工件端面与孔的垂直度。
The workpiece has an accurately machined bore, and is located from the bore and the end face, from a cylindrical post.
此工件有一精确机加工的大孔，因此通过一圆柱体采用该孔和工件端面定位。
Radius of curvature (ROC) is one of the three most important geometric parameters for a fiber optic connector end face.
曲率半径(ROC)是光纤连接器端面三个最重要的控制参数之一。
Using high vacuum magnetron sputtering system, it is coated sensitive film on the optical fiber end face, silicon, glass.
并采用高真空磁控溅射镀膜技术将敏感膜溅射在光纤端面、硅片、有机玻璃上。
The construction of a new type anti-pitting tappet with a cast hole in its end face and isothermally treated are described.
介绍了端面直接铸孔并进行等温处理的新型抗点蚀挺杆体的结构和热处理工艺；
The roller large end face run-out of tapered roller bearing (SDW) is an important quality index for tapered roller bearing.
圆锥滚子基准端面摆动SDW(端面侧摆)是圆锥滚子轴承的一项重要质量指标。
The penstock chooses end face integral seal and the seal material is special rubber, which makes the seal safety and durable.
闸门采用端面整体密封，密封材料采用特殊橡胶材料，保证密封牢靠、耐用。
The inner part of the clamping claw and the end face of the clamping claw are used for holding an annular part in an inner support.
然后用内撑的方式夹持一环形件，开动机床，车削卡爪的内圆部份和端面。
The method is to inject tungsten into the work end face of the spot welding electrode to improve the performance of the electro de.
采用离子注入钨方法在点焊电极工作端面注入钨以改善电极性能。
This paper research and manufactured electrochemical fining machine tool, which have higher automation extent aiming at gear end face fining.
本文针对齿轮端面精整，研究开发出了自动化程度较高的齿轮端面电化学精整机床。
The equations of teeth surface after modification of all key components, such as wave producer, oscillating teeth, end face gear, are deduced.
推导出了活齿端面谐波齿轮各啮合副经过齿面修形后的齿面方程。
S adopts high flatness, wear resistance, corrosion resistance of end face sealing piece on-off, sealed performance is good, long service life.
采用高平面度、耐磨损、耐腐蚀的端面密封片启闭，密封性能好，使用寿命长。
Single long sand pack experiment indicated injecting foamer and nitrogen alternately could form fine and smooth foam at front end face of core.
单长填砂管实验结果表明液气交替注入完全可以在岩心前端面形成质量较好的细腻泡沫。
Mounting of the distributor ring on the headstock, the compressed air feed via distributor ring and end face seals only when the spindle stops.
配气盘固定于主轴箱上，只有在主轴停止时，压缩空气才能通过配气盘和配气圈供给。
Upon the analysis of the mechanism about grinding of abrasive belt, grinding the end face and outside of the glass tube with abrasive belts is chosen.
通过对砂带磨削机理的分析，选定用砂带磨削玻璃管端面及外圆。
Carbon is packed in cartons, with a layer of translucent bamboo-paper pack, the lid end face and packet carbon paper talk with reseda, wrote a few words.
碳是装在纸盒里的，用一层半透明的竹纸包着，盒盖顶面和包碳纸上用浅绿色谈谈写着几个日文字。
Three kinds of injection sleeves construction, materials, surface treatment and application ranges of floating end face seal ring by die casting are expounded.
叙述浮动端面密封环压力铸造的三种压射套结构、材料和表面处理工艺及其应用范围。
Analysing the roof-fall cause of end face and support system, an effective way to reduce roof fall sensitivity and improving production efficiency are pointed out.
通过对工作面端面冒顶原因及支护系统的分析得出，加大液压支架的流量可以加快移架速度，降低冒顶事故率，提高生产效率。
The razor processing of the inner hole outer circle and the end face of the work piece can be carried out simultaneously only requiring a cutting tool and two arbors.
只需用一把刀具、二把刀杆就可同时进行工件的内孔外圆和端面的精剃加工。
End face with a gap, no boss butt is refers to the upper and lower casing left a certain gap between the upper and lower main chord rod end face at the same time contact.
端面有间隙、无凸台对接是指在上、下套管之间留有一定间隙，上、下主弦杆端面同时接触对接。
This paper will proposed a machine vision-based optical fiber ferrule end face detection system design and implementation to satisfy the actual demand inside the factory.
本文针对工厂里的实际需求，提出了一种基于机器视觉的光纤插芯端面缺陷检测系统的设计与实现方法。
End face with a gap, no boss butt is refers to the upper and lower casing left a certain gap between the upper and lower main chord rod end face at the same time contact.
端面有间隙、带凸台对接外形是指在标准节上部主弦杆上焊有定位凸台，定位凸台伸人另一标准节主弦杆内，上、下套管之间留有一定间隙配合定位。
The grind sharpened Angle of tungsten electrode, the diameter of end face and welding parameters that are important for welding are introduced from theory to application.
对与焊接至关重要的钨极高磨尖角度、端头直径，焊接规范参数从理论到应用予以介绍。
Based on analyzing the gear parameters, the grinding of the gear face with an end face of the grinding wheel was realized by changing the rotating Angle of rotating table.
在对齿轮参数进行数学分析的基础上，通过改变数控回转台的旋转角度，实现了用砂轮的一个端面去磨削齿轮的齿面。
Based on analyzing the gear parameters, the grinding of the gear face with an end face of the grinding wheel was realized by changing the rotating Angle of rotating table.
在对齿轮参数进行数学分析的基础上，通过改变数控回转台的旋转角度，实现了用砂轮的一个端面去磨削齿轮的齿面。
应用推荐