• Post processors for all major brands of Wire-EDM machines are included.

    后置处理器可所有主要品牌线切割机床编制后处理程序。

    youdao

  • The factors of craze and transfiguration are analysed when the workpiece is cutting by wire-EDM machine, at the same time, the particular preventive measures are proposed.

    分析了异形工件在进行线切割加工出现开裂变形原因,并制定详细预防措施

    youdao

  • Then see all kinds of wire is damaged, because basically is the engine parts, metal material into the metal rod folksy is also very easy to produce edm.

    其次看看各种线材有没有破损因为发动机舱基本上都金属材质部件线材破损处碰到金属容易产生电火花

    youdao

  • The paper studies the profile synthesis in the four axes simultaneous control wire EDM.

    联动数控线切割加工进行轨迹合成研究

    youdao

  • Machining effectiveness prediction and parameters optimization is considered in this software. Moreover it can be used on different wire EDM machine tools through models training module.

    仿真系统应该能够实现线切割加工工艺效果预测,加工工艺参数优化而且通过训练模型的功能,适用不同类型的高速走丝线切割机

    youdao

  • Mitsubishi wire cutting machine, EDM, drilling machines, grinders, milling machines, drilling bed;

    三菱线切割机、火花打孔机、磨床铣床、鑚

    youdao

  • Wire EDM, as its name suggests, USES wire as the electrode.

    线切割顾名思义使用作为电极

    youdao

  • When the method of general pulse power of wire cut EDM is used, magnetic steel has magnetic property inevitably and it is difficult to evacuate.

    采用一般脉冲电源磁钢进行电火花线切割加工,不可避免地将引起充磁,造成排屑困难

    youdao

  • Machining accuracy of slow-feeding EDM wire-cut is one of major targets scaling processing properties.

    慢走电火花线切割加工精度衡量加工性能重要指标之一

    youdao

  • Wire Electrical Discharge Machining Milling (wire EDM-Milling) is a novel kind of EDM-Milling method that has the distinct advantage of electrode compensation via the wire electrode slow traveling.

    线电极放电铣削加工一种新型电火花铣削技术,它最大优点是可通过线电极的缓慢移动来补偿加工中的电极损耗。

    youdao

  • Before EDM wire cutting die points of non_straight and non_arc lines, an arc for fitting the curve of the die point is necessary so as to calculate wire_cutting programming data.

    电火花线切割非直线圆弧模具刃口前,需先用圆弧拟合模具刃口曲线以便计算线切割编程数据

    youdao

  • This artical deals with interpolation and frequency converter of micro-computer numerical control wire cut EDM.

    本文涉及线切割机微机数控系统插补法以及变频装置的问题。

    youdao

  • A new method, WEDG (Wire Electro Discharge Grinding), for EDM 'ing very thin rods is proposed in this paper.

    提出一种加工微细轴的方法——电火花切割研磨法。

    youdao

  • This theses analyzes the composition of wire EDM CNC system. A parallel multi-CPU communication system with high efficiency is developed.

    本文分析了线切割CNC系统组成,介绍了并行高效多机通讯系统。

    youdao

  • The newest trends of electrical discharge machining (EDM) including die-sinking EDM, micro EDM and wire EDM (WEDM) in Japan were presented.

    综述了日本放电加工领域最新研究动态包括成形放电加工、微细放电加工线切割放电加工三部分内容。

    youdao

  • A technique of rapidly manufacturing EDM electrode based on LOM prototype through the combination of electroless plating, electroforming with wire arc spraying was investigated.

    利用LOM原型,把化学镀、电铸电弧喷涂技术结合起来快速制造电火花加工电极,是实现模具快速制造的有效途径。

    youdao

  • The company has a walking slowly on the device wire EDM, CNC EDM machines, surface grinding machine, optical projectors and other advanced electronic equipment height.

    公司设备上拥有慢走丝线切割机、数控电火花、精密平面磨床光学投影仪电子高度先进设备

    youdao

  • Over 50 sets professional equipments from Germany and Japan including high speed CNC, EDM, Wire Cutting machines etc.

    各类德国日本产高速加工中心火花线切割、精密模床专业设备50

    youdao

  • It is mainly engaged in the production of Wire-Cut EDMs, EDM Forming Machines and CNC High Speed Drilling EDMS.

    主要从事电火花数控线切割机,电火花成型机电火花高速穿孔机制造

    youdao

  • Certain parts can only be produced using sinker EDM, which, unlike wire EDM, does not cut all the way through the part.

    某些部分只能产生电火花使用伸卡球不同的是,线切割穿过部分所有道路

    youdao

  • Certain parts can only be produced using sinker EDM, which, unlike wire EDM, does not cut all the way through the part.

    某些部分只能产生电火花使用伸卡球不同的是,线切割穿过部分所有道路

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定