Because of the special alloy coatings has the properties and the application at the special requirements, can be divided into the wear resistance, solderability, magnetic and bearing alloy etc.
由于合金镀层具有的特殊性能及使用上的特殊要求，可分为耐磨性、可焊性、磁性及轴承合金等。
Laser cladding on titanium alloys can improve the surface properties, obtain the coatings with high hardness, good wear resistance and low friction coefficient.
在钛合金表面进行激光熔覆，可提高钛合金的表面性能，获得高硬度、耐磨性能好、低摩擦系数的熔覆层。
The wear resistance and electrochemical corrosion properties of IBED coatings were investigated with ball-on-disk wear tester and electrochemical equipment, respectively.
利用球盘磨损试验机和电化学综合测试仪研究了IBED膜层的摩擦学性能和电化学腐蚀特性。
The experimental results show that, the composite coatings have higher hardness and wear resistance.
实验结果表明，复合镀层具有较高的硬度和耐磨性。
Effect of process parameter on microstructure and wear resistance of the coatings were studied.
研究了工艺参数对熔覆合金层的组织和耐磨性的影响。
The ceramic coatings on the surface of some metals can improve the shortcomings of low microhardness, poorly corrosion and wear resistance, in the same time maintain the property of the metals.
金属及其合金表面进行陶瓷化可以改善金属基体的硬度低、耐磨耐蚀性差、可加工性差等不足，并且能保证原金属材料的使用性能。
Adhesion, wear and corrosion resistance of the coatings obtained were compared with those of conventional bluing at room temperature.
测量了发蓝膜的附着力、耐磨和耐蚀性，并与传统常温发蓝进行了对比。
Bodycote provides indispensable coatings systems for durability, anti-corrosion, wear resistance, improved hardness and electrical conductivity.
我们拥有不可比拟的镀膜系统，耐用、抗腐蚀，耐磨性好，改善硬度和电导率。
The effect of load on the wear resistance of composite coatings was studied and the anti-seizing of three composite coatings was compared.
研究了载荷对复合涂层耐磨性的影响；比较了三种涂层的抗咬合性能。
The wear resistance of the conventional coatings is better than that of nanostructured coatings in the same microhardness level, especially at the higher load.
尽管纳米涂层与普通涂层具有相近的硬度，但普通涂层的耐磨性优于纳米涂层，尤其是在重载条件下。
The ha coating deposited by biomimetic method has lower friction coefficient and better wear resistance compared with the composite coatings.
而与两种复合涂层相比，仿生沉积HA涂层有较低的摩擦系数和更好的耐磨性能。
Both of the wear resistance and microhardness have changed synchronously, and have been controlled by the crystallization process and structure of the coatings.
对其耐磨性能的研究也表明，它与镀层显微硬度的变化是同步的，且均受制于镀层的晶化过程及所形成的组织。
The microstructure, characteristics of aging processes of the deposited coatings were studied. The microhardness, wear resistance and other properties were tested as well.
对化学沉积复合镀层的显微组织结构、显微硬度、时效处理时的晶化与过饱和相的析出以及复合镀层的耐磨往进行了测试。
Cabinet together with new dumb light external install ester coatings and spraying technology processing, corrosion resistance, impact resistant, wear-resisting, reduce sound damage.
箱体外部采用新型哑光聚安酯涂料及喷涂技术工艺处理，抗腐蚀、抗撞击、耐磨、减少音响的损坏。
The coatings deposited by magnetron sputtering technology have good corrosion and wear resistance. This technique shows optimistic development trend in the field of magnesium alloys surface treatment.
采用磁控溅射制备的合金表面膜层具有防腐蚀性能优异、耐磨性强等优点，其作为镁合金表面处理技术具有良好的发展趋势。
The results show that the wear resistance of the arc spraying coatings depends mainly on the phases distribution in the coating. the relation with hardness of coating is not too great.
结果表明，涂层的耐磨性主要取决于涂层中的相分布，而与涂层硬度的关系不是太大。
The results show that the wear resistance of the arc spraying coatings depends mainly on the phases distribution in the coating. the relation with hardness of coating is not too great.
结果表明，涂层的耐磨性主要取决于涂层中的相分布，而与涂层硬度的关系不是太大。
应用推荐