Supporting process dependencies in WBM.
在WBM中支持流程依赖关系。
WBM offers the capability to transform a business model to business process.
WBM提供将业务模型转换为业务流程的功能。
Use WBM to model and simulate that change and then generate the BPEL for that process.
使用WBM建模和模拟更改,然后为该流程生成BPEL。
In this section, The project interchange that is exported from WBM will be imported in WID.
在这个小节中,从WBM导出的项目交换文件将被导入WID。
In this section, a simple model will be built in WBM. This model is composed of one simple task.
这个小节将在WBM中创建一个简单的模型,这个模型包含一个简单的任务。
After making the changes, he exports the WID project interchange from WBM as shown in figures 5, 6.
修改完成后,他从WBM导出WID项目交换文件,如图5、图6所示。
Create WBM model: in this stage the business analyst models the process in WBM based on the requirements.
创建WBM模型:在这个步骤中,业务分析师根据需求在WBM中为流程建模。
The business analyst starts to make updates to the WBM model based on new requirements from the customer.
业务分析师根据新的客户需求对WBM模型进行更新。
For major changes to a business process, the BPEL model should be re-generated from WBM and imported into WID.
对于业务流程的重要更改,应该从WBM重新生成BPEL模型并导入到WID中。
This article describes best practices for modeling, assembling, and deploying business processes using WBM V6.
本文将说明有关使用WBM V 6进行业务流程的建模、组装和部署的最佳实践。
Browse to the project interchange exported from WBM, to be compared with the current version of the WID module.
浏览到从WBM导出的项目交换文件,与当前版本的WID模块相比较。
This article describes lessons learned for modeling, assembling, and deploying business processes using WBM V6.
本文将说明获得的有关使用WBM V 6进行业务流程的建模、组装和部署的经验教训。
This section goes through the steps to perform the changes required on WBM model by analyzing the change report.
本小节通过分析更改报告介绍执行WBM模型上需要的更改的步骤。
Analyzing changes in WBM: the business analyst analyzes the changes and manually updates the business process model.
在WBM中分析更改:业务分析师分析更改并手动更新业务流程模型。
You can include all the unavailable element types listed above into your process as long as you are in the WBM Basic mode.
只要采用WBMBasic模式,可以将上面列出的所有不可用的元素类型包括到流程中。
This section will illustrate the steps required for synchronizing WID module with the WBM model by exporting the change report.
本小节通过导出更改报告展示同步WID模块和WBM模型所需的步骤。
This article described some best practices, gaps, and lessons learned during process modeling work using WBM V6. These include.
本文介绍了使用WBM V 6进行流程建模的过程中所总结的最佳实践、发现的差距以及获得的经验教训。
If the changes to the BPEL do not significantly change the flow of the model in WBM, it is best to make the changes directly in WID.
如果对BPEL的更改并不会大幅度更改WBM中的模型的流,最好直接在WID中进行更改。
Synchronize changes: the integration developer synchronizes the changes between the current WID module, and the PI imported from WBM.
同步更改:集成开发人员在当前WID模块和从WBM导入的PI之间同步更改。
When you use WBM to model a process and you want to transform the process into a BPEL process, consider the granularity of each task.
使用WBM建模流程且希望将该流程转换为BPEL流程时,请仔细考虑每个任务的粒度。
To transform the processes into BPEL process skeletons, model the business process in the WebSphere Process Server editing mode in WBM.
为了将流程转换为BPEL流程框架,请在WBM 中使用WebSphereProcessServer编辑模式建模业务流程。
This limitation implies that to keep the WBM and WID models in sync, you need to make all changes in WBM and then regenerate the BPEL to feed WID.
这个限制表明,为了保持WBM和WID模型同步,需要在 WBM中进行所有更改,然后重新生成BPEL来导入到 WID 中。
For example, if you choose the implementation type of a task as a business rule type, you can add concrete business rule requirement descriptions in WBM.
例如,如果您选择任务实现类型为业务规则类型,则可以在WBM中添加具体的业务规则需求描述。
The transformation utility in WBM regards each Local task as a different service, and the utility generates a unique SCA component for each Local task in the SCA module.
WBM中的转换实用工具会将每个局部任务视为不同的服务,该实用工具将在SCA模块为每个局部任务生成唯一的SCA组件。
This section illustrates the scenario where the business analyst would like to make other new changes in WBM model, and merging these updates into the existing WID module.
本小节将展示这样一个场景:业务分析师想要在 WBM模型中进行一些新的修改,然后将这些更新合并到现有 WID 模块中。
The integration developer synchronizes the updates in WBM model with the existing WID module implementation. This is done by repeating steps 1, 2, 3 in Export Change Report.
集成开发人员同步WBM模型中的更新和现有的WID模块实现,这需要重复导出更改报告中的步骤1、2、3。
The technical attributes view in WBM, as shown in Figure 5, provides an optional way to specify technical details that are used to implement a process, global task, or service on WPS.
WBM中的技术属性视图(如图5 中所示)提供了一种可选的方式,用以指定用于在 WPS上实现流程、全局任务或服务的技术细节。
Export WID module after changes in WBM: If the business analyst would like to make other changes to the model, then he can export the WID module and hand it over to the integration developer.
在更改WBM后导出WID模块:如果业务分析师想对模型进行其他修改,那么他可以导出WID模块并将其交给集成开发人员。
Starting from version 6.1, continuous changes can be made in the WBM and then new version of the model is exported. This version can then be merged with the exiting business process project in WID.
从6.1版开始,可以在WBM中进行持续更改并导出模型的新版本,新版本然后可以与WID中的现有业务流程项目合并。
Starting from version 6.1, continuous changes can be made in the WBM and then new version of the model is exported. This version can then be merged with the exiting business process project in WID.
从6.1版开始,可以在WBM中进行持续更改并导出模型的新版本,新版本然后可以与WID中的现有业务流程项目合并。
应用推荐