Laser vibration measurement is one of the most important applications of laser measurement technology.
激光振动检测是激光测量技术的重要应用之一。
Optical measuring method, optical interferometry is the most common and used widely for high accuracy non-contact vibration measurement.
光学测量法中以光干涉测量技术最为常见和应用广泛,可实现高精度的非接触式振动测量。
Experimental vibration measurement is one of the most widely used methods for tension evaluation and condition assessment of cable-stayed Bridges.
振动测试法是斜拉桥索力测定、监测和状态评估中应用最广泛的一种方法。
This method can be used in micro vibration measurement of high quality.
这种方法能应用于微振动的精确测量。
This article introduced the design proposal of virtual vibration measurement system.
本文介绍了虚拟振动测试系统的设计方案。
Mixed collection by combining traditional vibration measurement with RS-485 field bus.
采用传统振动测试与RS—485总线结合对多种测试信号进行混合采集。
This paper describes the method of vibration measurement and analysis for the seat of J-50 tractor.
本文阐述了J—50拖拉机座椅的振动测试方法和分析手段,得出了测试和分析结果。
The paper introduces a new method for designing the vibration measurement system by SOPC technology.
提出一种用SOPC技术实现轴系扭振测量的方案。
An integrative shock and vibration measurement system based on high-speed DSP processor is introduced.
本文介绍了一种以高速DSP数字信号处理器为基础的冲击振动测试系统。
A vibration measurement program is presented in this paper and analyzed from theoretical and experimental.
本论文提出了振动测量方案,并对方案进行了理论分析及实验研究。
According to the characteristic of design and realization for SDS, experiments platform for vibration measurement is established.
针对SDS的设计与实现特点,搭建以振动测量为基础的试验平台。
The vibration signals of core and winding measured from the transformer oil tank with vibration measurement system are investigated.
利用变压器振动测试系统,对在变压器油箱表面测得的铁心及绕组的振动信号进行研究。
It was demonstrated through concrete examples that vibration measurement of bearings played a decisive role in predictive maintenance.
通过具体事例证实了轴承测振在预知性维修中起到不可忽视的作用。
Based on the vibration measurement and analysis of worm gear reducer, a new monitoring method is put forward for wear of worm and worm wheel.
本文基于蜗杆蜗轮减速器工作中振动信号的测量和分析,提出了一种蜗杆蜗轮减速器磨损状态的振动监测方法。
Laser 3d vision measurement, laser vibration measurement, laser tomography and laser non - destructive inspection are presented in this paper.
介绍了激光视觉三维测量、激光振动测量、激光层析成像技术以及激光无损检测技术。
So the networked platform based on virtual instrumentation is deeply researched for the vibration measurement and signal analysis in gearbox system.
本文针对这些问题,以齿轮系统的振动信号为对象,研究了基于虚拟仪器的网络化测试平台。
This paper discussed the influence of supporting parameters on vibration measurement when the small I. C. engine was mounted on the flexible foundation.
本文就小型内燃机安装在柔性基座上的支承特性对振动测试结果的影响进行了研究。
A new laser diode interferometer for micro vibration measurement is proposed. The interferometer can measure micro vibrations of an object in real time.
设计了一种半导体激光干涉测量仪,可以实时测量物体的微小振动。
The cause of vibration on the turbogenerator stator end winding is analyzed, and the meaning of natural frequency test and vibration measurement is discussed.
本文分析了引起汽轮发电机定子绕组端部振动的原因,以及固有频率试验和振动测量的意义。
The mounting resonant frequency of vibration measurement system formed with piezoelectric acceleration sensor YD-1 and mounted magnetic base CZ-4 is addressed.
介绍了YD - 1型压电式加速度传感器与CZ - 4型磁座构成的磁座安装测振系统的安装谐振频率。
This paper presents an approach of vibration measurement and analysis by incorporating a microcomputer system in industrial rigid support dynamic balance machine.
介绍了在工业用硬支承动平衡机中利用计算机代替传统的电气箱作为测量和解算装置的方法。
With the Doppler laser vibration measurement system, the vibration velocity curves of the flip chip and tool tip were obtained during thermo-sonic flip chip bonding.
采用多普勒激光振动测量系统,获得了热超声倒装键合过程中工具末端及芯片的振动速度曲线。
According to the measurement principle and the analysis of error sources, some available methods to improve the precision of torsional vibration measurement are brought forward.
从测量原理和误差分析的角度出发,提出了提高扭振测量精度的可行途径。
According to the characteristic and demand of the bridge vibration measurement, the linear CCD detect technology is chosen t to realize the non-contact and mobile automatic measurement.
根据桥梁挠度检测的工作特点及要求,采用线阵CCD实现对桥梁振动挠度的远距离、非接触性、动态自动化检测。
Let the mechanical dynamics be combined with the method of finite element analysis to establish the simulation method of vibration measurement of dynamics balancing test-bed of mechanism.
将机械动力学与有限元分析方法相结合,建立了机构动平衡实验台振动测量的仿真方法。
A completed set of trouble diagnosis system for transmission in construction machinery using vibration measurement, rotating speed measurement, and computer technology is introduced in this paper.
本文应用振动测试技术、转速测试技术以及计算机技术等构成了一套可用于工程机械变速箱的故障诊断系统。
Explaining Railway Industry Standard "Railway Environment Vibration Measurement""
解析铁道行业标准《铁路环境振动测量》。
Vibration measurement and analysis of QTZ80 tower crane is conducted through dynamic strain test and experimental mode analysis. The correctness of theoretical analysis has been proved by the results.
采用动态应变测试和试验模态分析法对QTZ80型塔式起重机进行振动测试和分析,并通过实验结论验证其理论分析的正确性。
Vibration measurement and analysis of QTZ80 tower crane is conducted through dynamic strain test and experimental mode analysis. The correctness of theoretical analysis has been proved by the results.
采用动态应变测试和试验模态分析法对QTZ80型塔式起重机进行振动测试和分析,并通过实验结论验证其理论分析的正确性。
应用推荐