Business negotiation of large-scale steel structure and concrete engineering, in charge of cooperation with large designing institute with strength and making right design schemes for clients.
主要负责大型钢结构和混凝土工程商务谈判，负责与有实力大型设计院合作，共同为客户制定合理的设计方案。
The results may not only be adopted for structure design and strength evaluation of the container, but also collated with the values from the numerical calculation.
该实验结果为扁挤压筒的强度计算及结构设计提供了参考依据，也与数值分析解起到相互佐证的作用。
Calculation results show that the strength and stiffness of the body structure have met the design requirements. However it is necessary to make further optimization for the original design.
计算结果及路试表明，该型客车的车身结构的强度和刚度基本符合设计要求，但仍有待进一步优化设计。
The strength design of the tower crane structure is mainly to ensure that the metal structure part meets the strength condition in the work process.
塔式起重机结构的强度设计主要是确保金属结构部分在工作过程中满足强度条件。
Design wire mesh grid is don't have to consider the tolerance of the whole structure of the grid, local damage will not affect the strength of the whole.
设计钢丝网网格时是不用考虑网格整体结构的承受力的，局部损坏不会影响整体的承受力。
According to the DISA technical design Standard and our experience, we use chocked-unchocked gating system to design the complex structure and high-strength technical system of QD90 Cylinder Block.
参照DISA工艺设计标准并结合公司以往经验，使用封闭一开放式浇注系统设计出结构复杂、高强度的QD 90缸座铸件的工艺系统。
The calculating equation for bearing strength of reinforced concrete, which is educed by the Theory of Hooping Strengthening, has been adopted in Design Code of concrete Structure.
“套箍强化理论”导出的钢筋混凝土承压强度计算公式，被我国各行业混凝土结构设计规范普遍采用。
In the connection design of steel structure, the shear plate with high-strength bolt connection is extensively used at the flexible joint where the beam is connected to the weak axis of the column.
钢结构节点设计中，梁与柱弱轴方向的柔性连接常采用剪力板高强螺栓连接，螺栓群所承受的荷载有竖向力和偏心力矩。
The structure features of the air spring on PW200K bogies are described. The design improvement and strength checking calculation are made for the part.
介绍了PW 200k型转向架空气弹簧复合座的结构特点，对该部件进行了改进设计和强度校核计算。
The experimental and numerical results indicate that the structure of the tower crane meets the demands of design in both strength and stability.
试验与计算的结果均表明该抱杆结构满足强度与稳定性设计要求，吊装过程中抱杆不会发生破坏。
It has been found applications in many aspects, such as structure design, strength analysis, life estimate, and fracture safety analysis, etc.
这种方法在许多方面得到应用，如结构设计、强度分析、寿命估算和断裂安全分析等。
This paper mainly discusses the structure design, internal force analysis and calculation on strength and rigidity of the conveyor triangle frame.
本文主要介绍该输送机三角形支架的结构设计、内力分析、强度和刚度的计算。
After that, this dissertation expatiates on the principles of structure design and the method of choosing parameters of axial bearing and discusses the analysis of strength and thermal verification.
对轴向轴承的结构设计原理及其参数的选定进行了具体的阐述，其中对强度分析和热校核也一一进行了讨论。
After the lightening design, the strength, the rigidity and the dynamic characteristics of the bearing structure meet all standard requirements.
轻量化设计后的承载结构的强度、刚度及动态特性满足各项标准的要求。
The design method of hot-press for producing the hard pressboard cylinder is introduced and the calculation method of its structure strength is presented.
介绍了硬纸筒加工用热压机的设计方法，其中对结构强度的计算方法作了重点介绍。
The computation analysis shows that the car body structure design is reasonable and meets the locomotive general (arrangement) and relevant national standards for (locomotive) static strength.
最后通过计算分析，校验说明该车体结构设计合理，满足了机车总体布置和国家相关标准对机车静强度的要求。
This article discussed the large military shelter structure design, and according to bear weight condition of the shelter, the strength and rigidity are finite element analysed.
论述了某大型军用方舱的结构设计，根据方舱的受力状态，对其强度、刚度进行了有限元分析。
Calculation result shows that tank structure meets the strength requirement, and the design of main body is reasonable.
计算结果表明：罐体结构满足强度要求，且主体设计比较合理。
The design of the die adopted reasonable insert structure, which solved the problem of the slide short of strength and the die sets short of rigidity in the core-pulling process.
模具设计采用了合理的镶件结构，解决了滑块在抽芯过程中的强度不足以及模架刚性不足等问题。
In this article, the selection, structure design and strength calculation of tabular heat exchangers working with combustible, easy fouling and high temperature contents were introduced.
本文介绍了用于易燃、易结垢、高温差介质的管壳式换热器的选型、结构设计、强度计算。
This paper aims to conduct integration study on construction loads and falsework strength with design theories for structure reliability.
中文摘要本研究旨在透过结构可靠度设计理论，对营建载重与模板支撑本体强度进行整合性研究。
The method of improving corrugated box's compressive strength was studied from the view point of corrugated box structure design.
从瓦楞纸箱结构设计的角度，研究了提高瓦楞纸箱抗压强度的方法。
By means of finite element method, the strength analysis of light frame has been executed, and the result verifies the rationality of structure design.
采用有限元法对构架强度进行了计算分析，在对轻型构架的强度和力学特性有一定认识的同时，验证了结构设计的合理性。
The main measure taken is the application of the five stage design to prestressed steel structure, in which high strength strands are used as prestressed tendons.
主要措施是采用以高强度钢绞线作为预应力拉杆的预应力钢结构五阶段设计。
It also introduces the procedure of the design of the revolving door cabinet, including the selection of the dimension series, structure, strength and stiffness computation.
介绍了转门机柜的使用特点及其在雷达中的应用情况，阐述了转门机柜骨架的设计过程，包括尺寸系列选取、结构形式以及刚强度计算等方面。
Taking the idea of ultimate state design, this thesis studies the ultimate strength performance of this new structure on "Sachsen".
本论文基于极限状态设计的思想，对这种新型强力甲板结构型式的极限强度性能进行了分析。
Thls paper introduces data and result about structure design of the lifting beam, its strength check, nondestructive test, strain measuring and stress analysis.
本文介绍吊梁的结构设计与强度校核、无损检验、吊装过程应变测试及应力分析等方面的数据和结果。
But such force is ignored in structure design and strength calculation.
但在筒体结构强度设计计算中此项冲击力是忽略不计的。
This paper mainly carries on the design of hydraulic wrench structure, including the design of the hydraulic cylinder, a ratchet mechanism design and strength check.
本文主要对大扭矩液压扳手结构进行设计，包括液压缸的设计，棘轮机构的设计及强度校核等。
The core technique of hyper firing-rate series launch is the design and strength analysis of the projectile structure.
弹丸结构设计及其强度分析是超高射频串联发射核心技术之一。
应用推荐