The strain field around the crack tip is investigated.
裂纹尖端附近的应变场；
The process by which the displacement field is calculated from a given strain field is quite lengthy.
从一个给定的应变场去计算位移场的过程是十分冗长的。
Therefore, we could realize the effect of strain field reducing to different lattices cladding layer.
因此我们可以了解由不同晶格常数的夹层形成之应力场的影响。
Moreover, our simulation also shows the variation of strain field with the distance to the fault outcrop.
应变场垂直于断裂走向分量的变化情况类似于垂直向应变场；
Whether the specimen meets the performances of the product can be judged by the result of the strain field.
通过最后的变形计算结果来确定产品试样是否满足其生产的性能指标。
The area of the pile foundation is measured According to the characteristic of the soil strain field aroud a pile.
根据桩周土体应变场特点对桩周地基进行了区域划分。
The technology possesses high value in measuring strain field and temperature field of a huge mechanical structure.
该技术对于大型结构的应变场分布和温度场分布的检测有重要使用价值。
Combining the physical and mathematical simulations the strain field and its evolution near locked region are studied.
本文用物理模拟与数学模拟相结合的方法探讨了闭锁区附近的应变场及其演化。
This new technique even can be employed to measure the surface strain field in a rotary wing, a rotary axle or a flywheel.
该方法甚至还可以适用于转动的轴、飞轮和旋翼等表面应变场的测量。
Based on the test results, the strain field around the sub-cracks was calculated using the digital image correlation method.
在实验观测的基础上，利用数字图象相关程序对裂纹周围变形场进行了分析计算。
The temperature field, stress field and strain field of shipbuilding steel plate during laser forming process were calculated.
对船用钢板激光弯曲成形过程的温度场、应力场及应变场进行了数值模拟。
The crack tip stress-strain field of elastic-plastic materials are analysed by finite element method in the plane stress condition.
用有限元方法对平面应力条件下弹塑性材料的裂纹尖端应力应变场进行了计算。
To obtain high accurate shape with singly curved in laser forming, a new design approach was proposed based on plastic strain field.
为了实现单曲率面板材的高精度激光热成形，提出一种基于塑性应变场进行工艺规划的方法。
Because the forming process is complex, the stress field and strain field of forming process is difficultly defined by experimental method.
由于其成形过程复杂，变形过程的应力场和应变场很难用实验方法确定。
The temperature and stress-strain field of steel plate runout table cooling are simulated using thermo-elastoplastic finite element method.
针对钢板冷却发生翘曲变形的问题，利用热弹塑性有限元法对中厚板冷却过程的温度场及应力应变场进行数值模拟。
Through model experiments, reasonable decouple coefficient range and slot width are gotten, and unsymmetrical dynamic strain field is analyzed.
通过水泥砂浆模型实验，得到了理想的名义不偶合系数与切缝宽度，测试分析了不均匀的动态应变场。
We apply finite element method to invert the velocity field and strain field of crust motion in Urumqi region with GPS observational data since 2000.
利用2000年以来乌鲁木齐地区的GPS观测数据，通过讨论有限元数值计算方法，结合该地区实际情况，反演计算了该地区的地壳运动速度场、应变场。
A systematic investigation is made on the influence of the longitudinal and transverse period distributions of quantum dots on the elastic strain field.
对量子点超晶格材料中量子点纵向周期和同层量子点的横向周期间距对量子点及其周围应变场分布的影响进行了系统的研究。
The temperature field, stress field and strain field of 304 stainless steel wire and rod during 18 passes hot continuous rolling process were calculated.
对304不锈钢棒线材18道次热连轧过程的温度场、应力场及应变场进行了数值模拟。
This paper has simulated the driving force of solidification crack of stainless steels, namely the, stress strain field in the trail of molten weld pool.
对不锈钢凝固裂纹的驱动力即熔池尾部应变场进行了模拟。
It's employs numerical method to analyze stresses and strain of structure and its foundation. Its evaluate stability according to stress and strain field.
这种方法采用数值方法分析结构和地基的应力和应变，通过应力场和应变场来评价其稳定性。
As an example of this method, the horizontal and vertical displacement field and the tilt and strain field due to vertical strike faulting are calculated.
作为该方法的应用实例。本文对直立走向滑动断层的水平、垂直位移场及倾斜、应变场进行了模拟计算。
The notch sensitivity of HSC and steel fiber reinforced HSC and the strain field of HSC reinforced with steel fibers ahead of the crack tip have been analyzed.
分析了钢纤维高强混凝土和普通高强混凝土的缺口敏感性以及钢纤维对高强混凝土裂缝前缘应变场分布的影响。
The conclusion is that this acoustic anomaly may be interpreted by nonlinear coupling of the elastic strain field to the fluctuation of the soft-mode coordinate.
这种声学反常行为可以用均匀弹性应变场与软模坐标涨落的非线性耦合来解释。
After an actual rolling process of 2050 mill was simulated by using the model, evolution laws of strain field, temperature field and microstructure were analyzed.
运用该模型对2050现场实际轧制过程进行模拟计算，分析了轧制过程轧件变形场、温度场及显微组织的演变规律。
Using experimental mechanical method of moire analysis, strain field distributions of LY12CZ aluminum alloy welded joints under different conditions were investigated.
采用云纹分析的试验力学方法，研究了不同情况下LY 12 CZ高强铝合金焊接接头应变场的分布特点。
The basic idea is that the strain field response can be regard as a superposition of the so called strain modes multiplied by corresponding time-dependent modal coordinate.
其基本思想是：结构在承受动态载荷的作用时，其应变场可用所谓“固有的模态应变场”按某种比例的叠加来表达。
According to above results, the horizontal displacement and strain field caused by the main fault movement have simulated and showed the interactions among boundary faults.
依据上述反演结果，模拟了区域主要断层运动引起的水平位移、应变速率场图像，显示了边界断裂及其之间的相互作用。
In order to obtain reliable strain field, full-field strain measurement based on least-square fitting of local displacement for digital image correlation method is proposed.
为了从含噪声的位移场中计算得到可靠的应变场，提出一种基于位移场局部最小二乘拟合的全场应变求解方法。
In order to obtain reliable strain field, full-field strain measurement based on least-square fitting of local displacement for digital image correlation method is proposed.
为了获得可靠的应变场，满场应变测量最小二乘法拟合的局部位移的数字图像相关方法的基础上提出的。
应用推荐