Pressed Solidification Process Equation of Compatibility.
加压凝固过程的谐调方程。
Moreover, numerical simulation of solidification process is the basis of analyse.
而凝固进程数值模拟则是分析的基础。
The effect of power ultrasonic on the solidification process of Babbit was investigated.
研究了功率超声对巴氏合金凝固过程的影响。
The numerical modeling of solidification process is moving from macro-to micro-modeling.
凝固过程的数值模拟正在由宏观向微观转变。
A model of the solidification process during the high speed PET-POY spinning is proposed.
提出了一个涤纶高速预取向丝凝固过程的模型。
The solidification process of the surface composite layer was also analysed in this paper.
本文分析了表面复合材料层的凝固过程。
The growth of slab shell accords with the square root rule in whole solidification process.
整个凝固过程坯壳厚度生长符合平方根定律。
To obtain the high-quality forged steel ingot, it must control the ingot solidification process.
要获得锻造所需的优质钢锭,就必须控制钢锭的凝固过程。
The solidification process of liquid metal in the CASTEX technique was studied by FEM (finite element method).
利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
Filling and solidification process of low pressure casting is a complex and dynamic process with huge heat dissipation.
低压铸造充型是一个伴随着大量的热量散失的复杂的动态过程。
Numerical simulation of temperature field during al solidification process under static high pressure has been conducted.
采用数值模拟的方法,研究了纯铝在静高压作用下凝固过程温度场的变化情况。
Abstract: In this paper, solidification process of laser pool for compositecoating system is studied, using numerical technology.
文摘:采用数值模拟技术研究了复合涂层激光熔池凝固过程。
Abstract: in this paper, solidification process of laser pool for composite coating system is studied, using numerical technology.
文摘:采用数值模拟技术研究了复合涂层激光熔池凝固过程。
The optimization on the filling and solidification process of CY-61100 lathe tailstock casting was conducted by numerical simulation.
对CY- 61100车床尾座铸件充型及凝固过程进行了数值模拟及优化研究。
The metallography microprobe method has been used to study the solidification process and segregation of a low segregated superalloy.
用金相探针法研究了一种低偏析高温合金的凝固。
At present, the most competitive research method of foundry technology is numerical simulation on mold filling and solidification process.
当前,铸件充型凝固过程数值模拟是最具竞争力的铸造工艺研究方法。
Improper calcium treatment will not only affect the casting properties, but also affect the solidification process of molten steel in mould.
钙处理不当时不仅影响钢水的浇铸性能,而且还会影响钢水在连铸结晶器内的凝固行为。
The macrosegregation is formed in central area of the billet resulted from the continuous enrichment of solute during solidification process.
随凝固的进行,液相中的溶质不断富集,最终在铸坯的中心区域形成宏观偏析。
The solidification process of a driving wheel hub cast with former foundry method was simulated to find out the reason causing shrinkage defects.
对驱动轮轮毂原铸造工艺进行凝固模拟,找出缺陷的成因,并对原工艺进行了改进,采用顶置随形压边浇冒口。
The different parameters symbolizing solidification quality and effect of solidification process parameters on solidification quality are analyzed.
分析了表征凝固质量的各种参数及凝固过程参数对凝固质量的影响。
Although the numerical simulation of steel ingot solidification process of research, some progress is being made, but there are still many problems.
虽然在钢锭凝固过程的数值模拟研究方面,目前取得了较大的进展,但仍存在不少问题。
The effect of the initial state on the solidification process of liquid steel and the temperature changing inside furnace were discussed, respectively.
讨论了正常熔化时间即断电前炉内状态对断电后钢液凝固和炉内温度变化的影响。
Numerical computer simulation and modelling for solidification process of castings have been giving a great impetus to the development of foundry technology.
铸件凝固电子计算机数值模拟正对铸造工艺的进展发挥着巨大的推动力。
The rate of solidification process increases with the concentration of the monomer solution, gelation temperature and the amount of the initiator and catalyst.
随着单体溶液浓度、固化反应温度、引发剂和催化剂加入量的提高,凝胶固化反应速率快速增长。
Based on this, the design of casting process was optimized, the solidification process was simulated again, the results of simulation were compared and analyzed.
在此基础上对其铸造工艺进行了修改,工艺优化,又一次进行凝固模拟,对前后模拟结果进行了分析与比较。
Using the developed numerical simulation software of temperature field, the solidification process of wear resisting cast ball in metal mold was numerically simulated.
利用温度场数值模拟软件对金属型耐磨铸球的凝固过程进行了数值计算。
A two-dimensional unsteady temperature field calculation mathematical model has been set up by analyzing ingot solidification process and the program has been developed.
在分析锻造用钢锭凝固过程特点的基础上,建立起钢锭铸造凝固的二维非稳态温度场计算数学模型,并编制程序。
A two-dimensional unsteady temperature field calculation mathematical model has been set up by analyzing ingot solidification process and the program has been developed.
在分析锻造用钢锭凝固过程特点的基础上,建立起钢锭铸造凝固的二维非稳态温度场计算数学模型,并编制程序。
应用推荐