The ANSYS Rigid Dynamics capabilities enables analysis of complex assembly kinematics.
ANSYSRigid Dynamics的功能实现了复杂装配的运动学分析。
The curtain model is represented as an object composed of mass points connected by semi rigid rods whose behavior is governed by non rigid dynamics.
通过把描述非刚体运动的半刚性杆相互连接来得到窗帘的模型。
Bullet is a 3d open source physics engine that supports rigid - and soft-body dynamics and collision detection in 3d.
Bullet是一个3d的开源物理引擎，支持3d的刚体和软体力学以及碰撞检测。
A rigid controller for the unmeasured vibration states was designed and a compensatory method for the impact on position control caused by system dynamics was given.
针对振动状态的不可测量性，应用刚性控制规律设计了控制器，给出了一种补偿系统动力学对位置控制影响的方法。
The SP mill dynamics model rigid and flexibility with clearance was built using finite element and impact theory.
利用有限元和冲击理论建立了SP压力调宽机含间隙的刚体和弹性体的动力学模型。
Further topics include kinematics, particle dynamics, motion relative to accelerated reference frames, work and energy, impulse and momentum, systems of particles and rigid body dynamics.
更进一步探讨运动学，质点动力学，于加速座标系上之运动行为，功，能量，冲量，动量和质点系统与刚体动力学。
This paper deals with the driving process of chain sprocket system with the multi rigid body dynamics method.
采用多刚体方法对链条链轮系统的驱动过程进行了建模和动力学分析。
Have studied the dynamics Lagrange method of many rigid body more systematically, namely the many rigid body dynamics modeling method to adopt relative coordinate.
比较系统地学习了多刚体动力学的拉格朗日方法，即采用相对坐标的多刚体动力学建模方法。
By using a body model of 15 segments and dynamics of rigid bodies, the astronaut's self rotation is modeled.
本文借助15段的人体模型，使用多刚体动力学的方法建立起航天员转体动作的力学模型。
Based on the control theory of feedback linearization, the zero dynamics equation for a planar 3r rigid redundant robot was derived.
基于反馈线性化控制理论，推导出了平面3r刚性冗余度机器人的零动态方程。
But there are only basic info of geometry, topology and partial kinematics in the CAD model in STEP. The description on feature of multi-rigid-body dynamics is hardly blank.
使用现有的产品数据表达与交换标准STEP只能描述CAD模型几何、拓扑和部分运动学信息，对多刚体动力学特征的描述一直是特征模型中的一个空白。
The problem of tracking control for a rigid robot manipulator with uncertainties in its dynamics is considered in this paper.
本文考察带动力学不确定性的刚性机械臂的跟踪控制问题。
This paper is concerned with the dynamics and control for planar, large Angle rapid slew maneuvering of a flexible multi body spacecraft, consisting of a rigid central body and a flexible beam.
研究一类构形为中心刚性带挠性梁的航天器平面快速大角度机动的动力学与控制问题。
The rigid body dynamics model of engraving robot is established based on Newton-Euler method, and dynamics experiment is also analysed with this model.
基于牛顿·欧拉方法建立了雕刻机器人的动力学模型，并利用该模型进行了动力学实验分析。
Pulldownit! is a brand new dynamics solver which allows for the creation of fractures as well as massive rigid bodies simulations.
是一个全新的动力学求解器允许新的创造的骨折以及大规模机构模拟刚性。
The rigid body dynamics model of the 6-PUS parallel mechanism is presented based on Newton-Euler method.
用牛顿—欧拉方法建立了6PUS并联机构的动力学模型。
Using the singular perturbation theory, the full-order flexible dynamics system is decomposed into slow (rigid) and fast (flexible) subsystems.
采用奇异摄动方法将柔性机械臂系统动力学方程分解为慢变(刚性)和快变(弹性)两个子系统。
Kinematics and dynamics of mechanical systems including rigid bodies in plane motion.
机械系统的运动学与动力学包括刚体的平面移动。
Calculation of the floating raft isolation level brings differences in use of rigid body models in research of dynamics mechanics research in the floating raft isolation system.
在船舶浮筏隔振系统的动力学特性研究中，采用刚体分析模型计算浮筏隔振效果会产生很大误差。
The dynamics performance of short rigid subgrade between the bridge and tunnel was influenced by the train heading;
列车驶向对桥隧间刚性短路基过渡性能的动力学影响；
Based on multibody system dynamics method and ADAMS software platform, a rigid-flexible coupling multi-body model is built for vehicle dynamics simulation.
利用多体动力学方法建立了基于ADAMS软件平台的整车刚柔耦合多体系统操纵动力学仿真分析模型。
A dynamics modeling and analysis for Sight-stabilizing action system is made based on the multi-rigid body system theory and Lagranges equations.
本文应用多刚体系统理论和拉格朗日方程建立了稳瞄操纵机构的动力学数学模型。
The sloshing dynamics of an arbitrary axisymmetric rigid tank is investigated under low-gravity conditions, and an equivalent mechanical model theory is analyzed in this paper.
本文研究了微重状态下任意旋转对称容器内液体晃动力学问题，分析给出了液体晃动的等效力学模型。
The rigid-flexible coupling dynamics' modeling and modal analysis were employed to study the system consisted of square plansifter and flexible suspender.
针对高方平筛和其上固结的柔性吊杆组成的动力学系统，进行了刚柔耦合的动力学建模和振动模态分析。
The rigid-flexible dynamics of a flexible plate considering thermal effect was investigated.
研究考虑热效应的柔性板的刚-柔耦合动力学规律。
We discuss the dynamics problems of ideal rigid-plastic material in the flow theory of plasticity in this paper.
本文讨论了塑性流动理论中的理想刚塑性材料的动力学问题。
In this paper, the rigid-flexible coupling dynamics of satellite solar battery with multi point contact-impact is investigated.
研究了卫星太阳电池阵在多点撞击过程中的刚-柔耦合动力学问题。
In this paper, the rigid-flexible coupling dynamics of satellite solar battery with multi point contact-impact is investigated.
研究了卫星太阳电池阵在多点撞击过程中的刚-柔耦合动力学问题。
应用推荐