Wire line flexible pumping rod is a coiled rod with sealing wire line.
钢丝绳柔性抽油杆是一种特种密封钢丝绳的连续抽油杆。
Through analyses the force on the pumping rod, building-up the polish rod mathematical model.
经对抽油杆柱的井下受力分析，建立了光杆功率数学模型；
The control rod string which is consisted of pumping rod and controller is tripped into the release string.
抽油杆与控制器组成的控制杆柱下入到丢手管柱内，控制杆柱上部与杆式泵的进油孔相连。
Eddy current, magnetic leak, magnetic particle and ultrasonic test are the main methods used for pumping rod test.
目前，对抽油杆的自动探伤主要有涡流、漏磁、磁粉及超声方法，各有其优缺点及适用范围。
Appropriate machining, rolling rolling make quantitative, and ford All or variant processing, pumping rod or line stretching.
适切削加工，做定量压延滚牙性，用于卯合或变型加工，抽伸棒或线。
The common faults during oil pumping rod inspection are analyzed, the reasons that cause them and the solving methods are discussed.
对抽油杆检测中发现的常见不合格项进行了分析，探讨了形成原因和解决方法。
After calculating, the be st combination of pumping parameter and pumping rod and interval of stabilizer a nd pump efficiency are shown, which...
通过软件计算，可确定出抽汲参数、抽油杆、扶正器间距和泵效的最佳组合。
A pumping rod housing lock joint of a screw pump is primarily used to resolve the problem that the current screw pumping rod joint is easy to release.
一种螺杆泵抽油杆防脱扣接头主要解决现有螺杆泵抽油杆接头易脱扣问题。
The design philosophy and method for equal stress ratio of pumping rod are proposed and the corresponding software for optimization design of rod pumping parameters is compiled.
文中还提出了抽油杆等应力比的设计思路和方法，并编制了相应的机抽参数优化设计软件。
Rod pumping is a main artificial lift oil production method in petroleum industry.
有杆泵采油是石油工业传统而占主导地位的人工举升采油方式。
Basic parameter database of rod pumping system is built, the access to database by means of program is accomplished.
建立了有杆抽油系统基本参数数据库，并实现了对数据库的程序访问。
Then, in view of the actual operation for pumping problems such as the belt, broken rod, rod case of cards brake and so on in a depth discussion and analysis, and proposed solution to the problem.
再针对抽油机在实际运行中出现的问题，对断带、断杆、抽油杆遇卡和刹车等进行深入的讨论与分析，提出问题的解决方案。
The main drive chain and the bearing chain divide the polished rod load into reverse pumping load and equilibrium load.
主传动链与承载链将悬点载荷分解为换向抽汲载荷与平衡载荷。
The parameter data-base of the beam pumping unit and the newly energy-saving pumping unit is established, which lay a solid foundation for the simulation of the rod pumping system.
建立了游梁抽油机和新型节能抽油机的参数数据库，为实现对有杆抽油泵系统的仿真研究奠定了基础。
In addition, a method for checking the reliability of the failure data of rod pumping system is expounded with field examples.
还通过实例说明了有杆泵抽油系统检泵故障数据的可靠性分析方法。
Rod pumping oil recovery system is applied widely, the optimal method was usually used to enhance the efficiency, but it is easy to ignore that the electromotor matches other fixtures rationally.
有杆泵往复抽油方式常采用机、杆、泵优化的方法来提高系统的整体效率，但易忽略电动机与其他设备的合理匹配。
Based on the former research, the software of the design and diagnosing for the rod pumping system is developed.
基于上述理论研究，开发了有杆抽油系统设计与诊断软件。
Compared with conventional beam pumping unit, the swing-rod beam pumping unit can reduce the maximum crank axle torque markedly, reduce and even eliminate negative crank axle torque.
同常规型游梁式抽油机比较，该机型可以显著降低曲柄输出轴的最大扭矩，减小甚至消除负扭矩，在降低能耗的同时改善了减速箱的受力状况。
The rod pumping pump is the most important key parts of the rod pumping system.
有杆抽油泵是有杆抽油装置的最关键部分。
The leakage curves in the indicator diagram of a pumping well reflect the forces born by the sucking rod in static state.
抽油机井示功仪测试的上、下漏失曲线反映了抽油杆在静止状态下的受力。
At present, heavy oil or extra heavy oil is produced by means of thermal oil recovery or rod pumping, which are low efficient, energy consuming and short in production life.
目前，稠油或特稠油一般采用热力及有杆泵进行开采，这种生产方式效率低、能源消耗大，且设备运行寿命短。
The influence of dynamic thermal effect induced by optical pumping of YAG crystal rod in a pulsed solid laser on the wave front of the output laser beam is studied in this paper.
本文研究了脉冲固体激光器的YAG激光棒光泵浦动态热效应对激光波面的影响。
The influence of dynamic thermal effect induced by optical pumping of YAG crystal rod in a pulsed solid laser on the wave front of the output laser beam is studied in this paper.
本文研究了脉冲固体激光器的YAG激光棒光泵浦动态热效应对激光波面的影响。
应用推荐