Profiles in the MQCMDS class control the ability to define, delete, alter, or display a process or namelist using MQSC commands, or some other command interface.
MQ cmds类中的配置文件控制使用MQSC命令或其他命令接口定义、删除或显示进程或名称列表的能力。
On the basis of this, business process simulation mechanism, activity control method, event-dealing method and graphic interface for modelling and simulation are studied.
在此基础上，建立了面向对象的动态仿真活动控制原理和事件处理方法，并对仿真建模图形界面进行了研究。
You'll find a /proc interface to manage the process hierarchies, giving you full control over how groups are formed.
您会发现 /proc接口用于管理进程层次结构，让您对组的形成方式有完全的控制。
Finally, according to different situations in workshop, two kinds of interface methods between MES and Process Control System were introduced.
最后，根据不同的车间适用场合，分别介绍了两种制造执行系统和车间过程控制系统的接口方式。
This type of system control software, computer interface, the computer recording and displaying the testing process and result.
该型含系统控制软件、计算机接口，可在计算机上全程记录和显示测定过程和结果。
System control and process configurations are handled by a PLC linked to a Touch screen Operator Interface.
由将仪器连接至可编程的触屏操作界面进行系统控制和加工配置。
RS232 and PROFIBUS-DP protocol convert interface can embed in the process control equipment as Intelligent Slave Station, that realize many functions as data collect and control.
RS232和PROFIBUS - DP协议转换接口可嵌入现场设备作为智能从站，实现数据采集和控制等多种功能。
This article expounded and analyzed the accordance of data when his is calling medical insurance interface, presented an effective method to control the accordance based on actual developing process.
本文阐述并分析了目前大多数HIS调用医保接口时存在的数据一致性问题，并结合本单位的实际开发过程，提出了比较有效的控制办法。
According to the methods of process, this paper probes the process control and quality interface control of a large construction project.
根据过程方法，对大型建设工程项目的过程控制和质量界面控制进行了初步的探讨。
Dynamics analysis was done by use of experimental data from the literature, which indicated that interface chemical reaction was the control of the process.
利用前人的实验数据，进行了水合物分解的动力学分析，认为温度在零度以上时，水合物分解反应由界面化学反应过程控制。
It has important principle value for synthetical control of ecosystem to research system coupling and its interface process.
研究系统耦合及其界面过程对于生态系统的综合调控具有重要理论价值。
The technology involves the process control, concentration tracking, self-optimization, self-correction, AE control and a friendly man-computer interface.
内容包括工艺跟踪、浓度跟踪、自寻优、自校正、效应控制等技术以及友好的人机接口。
With RS-232C criterion interface, testing stress device communicate with PC which process and control signal more.
利用RS- 232c标准接口，应力仪与pc机进行通讯，可以在pc机中进一步对信号进行处理和控制。
It is available reading some configuration information required by control process from external FLASH memory through SPI interface and writing data records in the memory.
控制过程中所需的一些配置信息可通过SPI接口从外部FLASH存储器读取，所需记录的数据也可写入该存储器中。
In the Chapter 3, it expounds the Bluetooth protocols, the mode Bluetooth users, the process of Bluetooth communication and Bluetooth exchange specific information of Host Control Interface (HCI).
第三章对蓝牙协议，以及蓝牙用户模式、蓝牙的通讯过程、蓝牙主机控制接口(HCI)信息交换命令的数据格式进行了阐述。
Firstly, the control process analysis of man-machine interface design, finally compiled the corresponding software 12 blocks straight needle dial filling machine control process.
首先对控制过程进行分析，对人机界面设计，最后编制相应的系统软件实现12针拨块直线灌装机的控制流程。
Fifth step: 5 in the process control in the interface of the deposit to open just graphics files.
第五步：在加工控制界面中打开刚存入的图形文件。
It is made up of distributing network (INFI NET), process control unit(PCU), operator interface station (WSA), engineering work station (EWS) and computer interface unit (CIU).
它由分布式网络 （INFINET） ，过程控制单元 （PCU） ，操作员接口站 （WSA） ，工程师工作站 （EWS）以及计算机接口单元 （CIU）等组成。
Every process is design demanded to accurate control by PLC, every circle are all according to the packaging process adjusted at the man-machine interface to set up.
各道工序由PLC按设计要求准确控制，每个环节均可根据包装工艺需要在人机界面上任意调节设定。
The technical process and control object of the automatic ultrasonic inspection of LSAW, the logic diagram of technical process, hardware interface system and software program of PLC were introduced.
本文介绍了LSAW自动超声检测过程及控制对象、工艺流程逻辑图、PLC的硬件接口系统及工艺软件编程等。
With this interface box, computerized process control technique may be easily introduced in the conventional apparatus at industrial site without reformation too much.
可对工业现场常规装置不作太大改造就引入计算机的过程控制技术，实现机电一体化的初步目标。
The industrial control computer operates on monitoring and managing for the interface of technological process, while the programmable controller and the intelligent regulator execute control task.
工控机用于工艺流程画面监视及管理，控制任务由可编程控制器、智能调节器完成。
The industrial control computer operates on monitoring and managing for the interface of technological process, while the programmable controller and the intelligent regulator execute control task.
工控机用于工艺流程画面监视及管理，控制任务由可编程控制器、智能调节器完成。
应用推荐