The result is basically consistent between numerical simulation and experiment.
数值模拟结果与实验结果基本吻合。
Both numerical simulation and experiment were adopted to research ducted heat convection.
采用数值模拟和实验研究相结合的方法研究了管道的对流换热。
The influence of inner cone hole depth changes on the jet performance is investigated by numerical simulation and experiment.
通过数值模拟和实验测试相结合，研究了锥孔深度变化对外部射流的影响。
Through the reasonable simplification of the pin barrel extruder structure, we get the model for numerical simulation and experiment.
本文通过对销钉机筒挤出机结构的合理简化，得到数值的和实验的分析模型。
In this paper, the detonation driving problem of KE-Rod warhead is studied through two methods: 3d numerical simulation and experiment.
采用三维数值模拟和实验两种研究手段对周向均匀动能杆战斗部的爆轰驱动问题进行了研究。
In this paper, the microbuss temperature field and velocity field is researched through numerical simulation and experiment for the first time.
本文首次采用数值计算和试验相结合的方法对微型面包车车室内温度场、速度场进行了研究。
By theoretical analysis, numerical simulation and experiment research, the Interleaver based on optical all-pass filter technique is investigated.
对基于光全通滤波技术的奇偶交错滤波器进行了理论分析、数值模拟和实验研究工作。
The methods of numerical simulation and experiment have been used to study flow laws and distributing uniformity of baking equipment in the paper.
本论文采用数值模拟和实验相结合的方法，研究了焙烧装置分配室的烟气流动规律和流量分配均匀性。
Usually, numerical simulation and experiment method are be used for analyzing the interior airflow field under the condition of natural ventilation.
在研究自然通风下室内流场分布情况时，一般采用数值模拟与实验测量两种方法。
According to the result both numerical simulation and experiment have verified that the strain uniformity is improved and springback is reduced 21.87%.
结果表明优化拉形工艺参数后零件变形均匀程度提高，回弹减小了21.87%。
In this paper, the flow mechanism and the applications of thrust vectoring using synthetic jet are studied in theory, numerical simulation and experiment.
本文采用理论分析、数值模拟与实验相结合的方法对合成射流流动机理及推力向量控制中的应用进行研究。
Alternating direction implicit iteration method is developed for simulation. The results of the numerical simulation and experiment are basically in accordance.
其模拟结果与实测结果吻合较好，表明利用该方法模拟蓄水单坑的水分入渗问题是可行的。
The performance of dual-bed three-way catalytic converters with conventional structure and a particular structure was compared by numerical simulation and experiment.
采用数值模拟和实验相结合的方法比较了常规结构和一种特殊结构双载体三效催化转化器的性能。
So this paper is related to the study of basic forming principles of cold rolling for double groove ball bearing outer rings from theory, numerical simulation and experiment.
本文以双沟轴承外圈为研究对象，从理论、数值模拟和实验角度对双沟轴承套圈冷辗扩成型基本规律进行了深入研究。
By making use of numerical simulation and experiment methods, we studied the shielded structure of steel fiber reinforced concrete (SFRC) with tightly arrayed corundum spheres.
本文采用数值模拟与实验相结合的方法，对加入密排刚玉球层的钢纤维增强混凝土遮弹结构进行了较系统的分析研究。
Influences of input optical pulses including the control pulse and probe pulse on the switching window of ultrafast nonlinear interferometer (UNI) are studied by numerical simulation and experiment.
就超快非线性干涉仪(UNI)的输入光特性对其开关窗口的影响进行了数值模拟和实验研究，输入光包括控制光脉冲和探测光脉冲。
Based on the computational fluid dynamics, a design method for flow meter is given through numerical simulation and experiment on metal tube rotameter with special structure fixed on the level piping.
通过对适合安装于水平管道的特殊结构的金属管浮子流量计三维湍流流场的数值仿真及实验研究提出一种基于计算流体力学的流量传感器设计方法。
And combined with numerical simulation analysis, the result of the experiment on the model is validated.
最后结合数值模拟分析的方法，对模型试验的结果进行验证。
Through the comparison of numerical simulation value and experiment results, the range of reduction ratio was obtained while the tube forming ideality.
通过数值模拟与实验结果的比较，得出了获得较理想的成形薄壁筒形件时减薄率的选取范围。
This paper studies the influence of cross wind on the performance of natural draft dry - cooling tower by means of model experiment and numerical simulation.
本文结合模型实验与数值模拟两种手段，综合研究了横向风对自然通风干式冷却塔运行性能的影响。
The dissertation studies the characteristics of gas mixing and the gas-solid two phases flow in spouted-fluidization bed with experiment and numerical simulation methods.
本文通过采用实验和数值模拟的方法，研究了喷动流化床内气体混合特性以及床内气固两相的流动特性。
Hypersonic viscous interaction effects on measurement of free stream pressure in test section are studied through theoretical analysis, experiment measurement and numerical simulation.
通过理论分析、实验测量和数值模拟，研究高超声速粘性相互作用对实验段自由流静压测量的影响。
Based on model of experiment and numerical simulation, the factors influencing the length of air cavity are analyzed in this paper.
采用模型试验和三维数值模拟，对侧墙掺气坎空腔长度的影响因素进行了探讨。
The cement samples damage and fracture by exploding load was studied by experiment and numerical simulation method.
从实验和数值模拟两方面对爆炸载荷对水泥试样的损伤破坏进行了研究。
Influence of the workpieces pre-hole diameters and passes on thick-wall cylinders hole flanging is investigated by experiment and numerical simulation.
采用实验研究和数值模拟的方法，分析了工件预加工孔径和孔型参数对厚壁筒体翻孔工艺的影响。
Its photoelectric negative resistance characteristics were investigated both by experiment and numerical simulation and its equivalent circuit is proposed.
本文对它的光电负阻特性进行了数值模拟和实验研究，给出了器件等效电路。
The fluid flow and transport process of non metal inclusion in tundish under bottom blowing are studied by numerical simulation and water model experiment.
采用数值模拟手段，结合水模型实验，研究了中间包底部吹气过程对中间包内流场及夹杂物传输行为的影响。
The fluid flow and transport process of non metal inclusion in tundish under bottom blowing are studied by numerical simulation and water model experiment.
采用数值模拟手段，结合水模型实验，研究了中间包底部吹气过程对中间包内流场及夹杂物传输行为的影响。
应用推荐