Port：要绑定的网络端口。
HomePlug: Every outlet a network port?
每一插座都是网络端口?。
HLM port — Device's network port for HLM (AMP), such as 5550.
HLMport—用于HLM的设备网络端口(AMP)，比如5550。
Check the status of network port, Ethernet port IP address, Mike address.
检查网口状态，网口ip地址，麦克地址。
Remember that you must have network port access both ways for the virtual network to work.
记住，要使虚拟网络正常工作，您必须使这个网络端口可双向访问。
Network port requirements: Specific integrations to enable between the cloud and your network
网络端口要求：需要在云和您的网络之间启用的特定集成
A network port is needed to hook the notebook up to the network to test system performance.
需要一个网络端口把笔记本电脑接到网络来测试系统性能。
The tcptr command assigns a maximum limit of incoming TCP connections to a given network port or a range of ports.
tcptr命令为一个给定的网络端口或端口范围指定最大TCP连接限制。
Network Port Detection in Host Detector can be used for detecting intrusion in switched network which IDS can not work exactly.
在主机检测器中的网络端口检测功能，有效的解决了交换式网络中入侵检测系统无法检测的致命弱点。
The FSH is defined to listen on a specific IP address and network port. It is configured to handle one of the many protocols that WebSphere DataPower supports.
F sh定义为监听一个特定IP地址和网络端口，配置为处理WebSphereDataPower支持的众多协议之一。
You can set up different packet filters for different users that are located on internal (LAN) side or external (WAN) side based on their IP addresses or their network Port number.
您可以设置该位于内部(LAN)一方或外部(广域网)方根据其IP地址或端口号的网络不同用户的不同数据包筛选器。
If the network server is running on port 1527, the test should be successful.
如果网络服务器在端口1527上运行，那么测试应该可以成功。
Specify your host connection information, including server name, network protocol, host name, service, and port.
指定您的主机连接信息，包括服务器名、网络协议、主机名、服务和端口。
It can be used to get information about port usage because it also shows information about network sockets.
它可以用来获取有关端口使用情况的信息，因为它还可以显示有关网络套接字的信息。
The port to connect to (Using the RMI connector: 2809 for Base or 9809 for Network Deployment.
欲连接的端口（使用 RMI连接器：对于基本安装来说是 2809 ，对于网络部署来说则是 9809 。
This is caused by the lack of HTTP traffic being routed through the network proxy recorder on local host port 1080.
这是由于缺少HTTP地址流量造成的，这个地址流量是通过网络代理记录器在本地主机端口1080按照线路发送的。
A vulnerability scanner is similar to other types of scanners-for example, port scanners help secure the network and the systems on it.
漏洞扫描器类似于其他类型的扫描器——例如，端口扫描器有助于保障端口上的网络和系统的安全。
Figure 5 shows the typical network status; each listener has its own communication port.
图5显示了典型网络状态；每个侦听程序都有自己的通信端口。
It also routes the same traffic from a single port to multiple ones on the other side of the network.
它还能将信息从一个单独的端口路由到网络另一端的多个端口。
When I tried this application, my second JBI server was running on a machine whose network address was 192.168.10.33 and the port of second JBI server was 8092.
在我尝试此应用程序时，我的第二台JBI服务器正运行在一台计算机上，其网络地址是192.168.10.33且第二台JBI服务器的端口是8092。
This can make network configuration challenging, because the network has to be configured to allow incoming connections on a new port.
这样就给网络配置带来了挑战，我们必须将网络配置成可以接收新端口上的连接。
If it is not, make sure the network server is running on the port specified in the connection URL, and check to make sure all of the values are appropriate for your environment.
否则，确保网络服务器在连接url指定的端口上运行，并确保所有的值都适合您的环境。
If you manage a large network, research your network switch's "Port Security" features.
如果你是管理着一个大型网络，好好去研究一下你的网络交换机的“端口安全”功能。
Port adapter or network module.
端口适配器或网络模块。
The console view should state the server is ready to accept connections on the port specified in the Derby properties Network Server settings.
控制台视图应该会表示，服务器准备在Derby属性NetworkServer设置中指定的端口上接受连接。
The TCPIP port setting's Network Address entry within the Server document should be checked for accuracy against the hosts file or DNS.
应该对照主文件或DNS检查服务器文档中 TCPIP端口设置的NetworkAddress条目以确保准确性。
The command above starts the Derby Network Server with the default options: host is' localhost ', port is' 1527 '.
上述命令将使用默认选项启动Derby NetworkServer：主机是'localhost '，端口是' 1527 '。
The Derby network server is started on port 1088.
Derby网络服务器将在端口 1088上启动。
In this case, the Derby database is on the local machine (" localhost ") and the Network Server is listening on the default port of 1527.
在这里，Derby数据库运行在本地机器(“localhost ”)上，NetworkServer在默认端口1527上进行监听。
In this case, the Derby database is on the local machine (" localhost ") and the Network Server is listening on the default port of 1527.
在这里，Derby数据库运行在本地机器(“localhost ”)上，NetworkServer在默认端口1527上进行监听。
应用推荐