Need to establish a test mode shape make a prediction matrix.
我们需求树立一个测试形式构成做出预测矩阵。
In this paper, the vibration mode shape measuring principle for the blade is presented.
本文简要介绍了振型测量的基本原理。
The order of the natural frequency of T-beam could be estimated accurately by the mode shape.
通过阵型可以准确判断T型梁固有频率的阶数。
It is difficult to reliably determine blade's vibration mode shape with conventional measurement method.
传统的测量方法难以可靠地确定叶片的振型。
The only requirement is that the mode shape should have a significant value in relation to its mode shape;
唯一的要求是，相对于那阶模态振型来说，模态振型应该具有显著的数值；
The process determines (704) an estimated mode shape based on the values for the flow tube and fluid parameters.
过程根据流管和流体参数的值确定(704)一个估计模态。
We can quickly see that some of the mode shape information is strongly controlled by the exterior of the structure.
我们很快可以发现，某些模态振型信息是由结构外部极大地支配的。
Hereby, the change ratio of the first order mode shape is presented as the indicator for structure damage detection.
提出以第一阶振型改变率作为结构损伤识别的标识量。
When the springs supporting the beam are very soft, then the mode shape for the beam looks very much like a rigid body.
当支撑梁的弹簧非常软时，梁的模态振型看起来非常像刚体。
Finally, many complex mode shape derivatives of high accuracy can be obtained by decomposing system matrices only once.
该方法仅需进行一次系统矩阵的分解就可获得高精度的多个复振型导数。
Natural vibration characteristic of gun tube was analyzed triumphantly. Vibration frequency and mode shape were obtained.
对某火炮身管固有振动特性进行了分析，计算得到了振动频率和振型。
The damping factor of the most unstable mode shape of mistuned blade system is chosen as the cost function of optimization.
选取非均匀叶片系统中最不稳定振型的阻尼因子作为优化模型的目标函数。
Based on strain mode shape (SMS), the direct index methods of damage location and degree detection are presented and founded.
提出并建立了损伤位置直接指标法、局域应变模态面积损伤程度直接指标法。
The results show that the present method can identify the mode shape accurately and complement the use of PRCE under unknown exci…
结果表明，采用该方法能够有效地识别出模态振型，从而弥补了复指数法在未知激励下进行模态分析的不足。
Understanding the mode shape and how the structure will vibrate when excited helps the design engineer to design better structures.
理解模态振型和受激结构如何振动，将有助于设计工程师设计出更优的结构。
Curvature mode shape can indicate the presence of initial damage and its severity, and locate initial damage of a structure effectively.
曲率模态振型可以有效地确定结构早期损伤的存在、程度和位置。
Basically the simplest answer is that you need to measure a sufficient number of points so that you can uniquely describe the mode shape.
大致说来最简单的回答是，你需要测量足够多的点，这样你就可以唯一地描述模态振型了。
With applications to a three-span continuous beam bridge, the comparative of some methods of mode shape expansion and updating is researched.
针对某三跨连续梁桥，对几种振型扩展与修正的方法进行了比较研究。
The mode shape of the system is different from that of the structure on the fixed base in that there are rocking and swing at the foundation.
体系的振型曲线与刚性地基上结构的振型曲线不同，基础处存在平动和转动。
To determine the properties, the process determines (702) a measured mode shape based on pickoff signals received from a plurality of pickoffs.
为了确定这些特性，过程根据从多个传感器接收到的传感信号确定(702)一个测量模态。
The results show that the present method can identify the mode shape accurately and complement the use of PRCE under unknown excitation condition.
结果表明，采用该方法能够有效地识别出模态振型，从而弥补了复指数法在未知激励下进行模态分析的不足。
The mode shape function of the pier was offered to study the dynamic deformation feature of the continuous beam bridge sited on the elastic foundation.
为了研究弹性基础上连续梁的振动特性，提出了连续梁桥墩的振型函数表达式。
The initial sensor assignment is obtained by the QR decomposition of the structural mode shape matrix to ensure the estimation accuracy of the parameters.
利用结构振型矩阵转置的QR分解得到传感器的初始配置。
This paper gives a theoretical formulation for the extraction of mode shape by fitting the cross power spectra of the outputs and a cantilever beam is analysed.
该文提出了一种用互功率谱求振型的方法，并对此理论进行了详细推导，以一悬臂梁为例对该方法进行了试验验证。
The distribution stress and deformation, frequency and mode shape is acquired the outline optimization for the circum-shell of Compounding funnel is also studied.
得到了该类双曲型斗壳的应力变形分布、率和振型模态，并对颗粒料仓斗壳的外形曲线进行了优化。
In experimental modal analysis, it is necessary to measure the response data in directions of all degrees of freedom to obtain the complete mode shape information.
试验模态分析中，要获得完整的模态振型，需要在所有自由度方向都进行测量。
FEM Model is made and programmed in MATLAB, reasonable size is worked out, relation between frequency and density is analyzed, and the vibratory mode shape is given.
用有限元法建立了圆筒谐振子的模型，通过MATLAB软件编程，计算出合理的谐振子参数，对其频率密度特性进行了分析，并给出了振子的振型分布。
Using MATLAB6.5 BP neural network toolbox, compiles the structural damage detection process with the input parameters based on the modal parameters of frequency and mode shape.
以MATLAB6.5BP神经网络工具箱为基础，编写了基于频率平方变化和振型模态分量为输入参数的BP神经网络结构损伤识别程序。
Therefore, through structural modal analysis with different damage degree using ANSYS, get natural frequencies and mode shape data as neural network input vector after unitary.
因此，通过有限元软件ANSYS对具有各种损伤程度的结构进行模态分析，得到固有频率和模态分量的数据，经过归一化处理后作为神经网络的输入向量。
Therefore, through structural modal analysis with different damage degree using ANSYS, get natural frequencies and mode shape data as neural network input vector after unitary.
因此，通过有限元软件ANSYS对具有各种损伤程度的结构进行模态分析，得到固有频率和模态分量的数据，经过归一化处理后作为神经网络的输入向量。
应用推荐