The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
This design USES fuzzy control theory which doesn't require exact mathematical model because of the randomness of the controlled objects in the current city traffic control system.
针对当前城市交通系统中的被控对象具有较大的随机性和偶然性,引入了不需要建立精确数学模型的模糊控制。
The system structure, control principle, mathematical model, algorithm software are discussed.
文中论述了系统组成、控制原理、数学模型、算法软件等。
The thesis introduces a three phase AC motor's mathematical model in static reference frame and a simulation system for AC motors to develop a vector control inverter system.
针对三相异步电机矢量控制系统的要求,根据在静止坐标系统中异步电机的数学模型,进行了系统仿真。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
建立了主从式同步卷绕控制系统的数学模型,并详细介绍了控制系统硬件和控制方法的具体设计。
According to BLDC mathematical model and the movement principle, a simulation model of BLDCM control system by the SIMULINK and PSB block of software MATLAB is built in this paper.
根据无刷直流电机的数学模型和运行原理,通过MATLAB软件的SIMULINK和PS B模块,搭建了电机及整个控制系统的仿真模型。
In the design course, based on the survey data and the design mathematical model of signal coordination control system, the survey data are analyzed and the results are obtained.
在设计时,以交通调查数据为主要依据,根据信号协调控制系统设计的数学模型对数据进行分析处理,然后得出设计结果。
Warp unwinding tension control system for sizing machine lacks an precise mathematical model, and has nonlinear and time-varying Characteristics.
浆纱机经纱退绕张力控制系统缺乏精确的数学模型,且具有非线性和时变性的特点。
Mathematical model of adaptive variable structure of control system for DC servo robot was established with nonlinear sliding mode formed with saturation type scalar functions.
采用饱和型标量函数构成非线性滑模建立直流伺服机器人控制系统的自适应变结构数学模型。
The mathematical model for aircraft engine, heat exchanger, duct, venturi, valve and other components in aircraft environment control system (AECS) is described in this paper.
介绍了飞机环境控制系统中发动机引气、热交换器、管道、文氏管以及阀门等部件的数学模型。
For the complexity and difficulty of establishing an accurate mathematical model of DO parameter control in sewage treatment system, we propose a fuzzy control method with PLC to deal with it.
针对污水处理系统DO参数控制的复杂性和难以建立准确数学模型的特点,提出了一种用PLC对系统进行模糊控制的方法及实现。
Based on the mathematical model of AC asynchronism motor, a novel method for modeling and simulation of AC asynchronism motor control system in Matlab was proposed.
在分析交流异步电动机数学模型的基础上,提出了交流异步电动机控制系统仿真建模的新方法。
To realize high precision control of top pressure, the dynamic mathematical model of top gas pressure recovery turbine (TRT) system was researched.
为实现高炉顶压的高精度控制,提出了高炉煤气余压透平装置(TRT)系统炉顶压力的动态数学模型。
This system consists of control cell, sensor, mathematical model, control algorithm, and computer and technological process.
本系统由控制单元、传感器、数学模型、控制算法、计算机及工艺过程组成。
The mathematical model of a pneumatic force control system with an asymmetric servovalve and a single-acting cylinder were described.
分析了非对称气动伺服阀控单作用气缸的气动压力控制系统的数学模型。
Analysis and design of canal system automatic control usually are conducted with mathematical model of canal operation control.
渠道运行控制数学模型是渠道系统自动控制分析和设计的基础。
The interaction between operating mechanism and interrupter of a puffer circuit-breaker is regarded as a dynamic control system. Its mathematical model of breaking process is built.
将断路器的操动机构和灭弧室的相互作用视为动态控制系统,建立了断路器开断过程的数学模型;
The control is often based on a mathematical model of the system.
控制通常是基于一个系统的数学模型。
Mathematical model and control law of the digital electro hydraulic proportion system are put forward. Furthermore, computing simulation and experimental verification are carried out.
提出了数字电液比例系统的数学模型及控制规律,并进行了计算机仿真及实验验证。
According to the essence of Pilot Induced Oscillation (PIO) and the theory of Closed-loop control, the mathematical model of Pilot-Plane system is set up.
本文根据驾驶员诱发振荡的实质,从闭环控制理论出发,提出了人-机系统数学模型,并在时域内进行了计算。
The mathematical model of structural dynamic system is established and the singular control problem is studied.
建立了结构动力系统控制的数学模型,并进行了奇异控制问题的研究。
In this paper, a mathematical model of target assignment is established. It solves an important problem in command and control system of air defence.
本文建立了目标分配的数学模型,为防空指挥控制系统解决了一个重要的问题。
The mathematical model and control system structures of self-cascade induction machine drives is proposed, which is firstly developed in the world successfully.
描述了自级联式感应电动机的数学模型及其控制系统的结构,研制成功该类电机矢量控制系统样机。
Setting up mathematical model of the linear oscillatory motor can help further research on the system characteristics and control strategies.
建立直线振动电机数学模型可进一步深入研究系统特性及控制策略。
Using magneto-rheological damper, semi-active control theory and method, mathematical model of a controllable magneto-rheological damping and nonlinear control system is established for seats.
采用磁流变阻尼器半主动控制理论和方法,建立座椅可控磁流变阻尼非线性控制系统的数学模型。
The results of simulation show that mathematical model of neural networks of electro-hydraulic servo control system has better precision and the algorithm has ability to approximate error of global.
仿真结果辨明:神经网络描述的电液伺服控制系统数学模型具有较高精度,算法全局逼近能力良好。
It is very difficult to establish mathematical model and use the classics control method or the modern control method in this system.
很难对这类系统建立数学模型及用经典控制方法或现代控制方法实现控制。
Aiming at uncertain factors such as the load disturbance and it is difficult to establish accurate mathematical model in motor control system, traditional control theory can not be made good effect.
针对电动机控制系统中难以建立精确数学模型以及负载扰动等不确定性因素,无法使传统控制理论取得良好的应用效果,设计了一种智能电机控制方法。
The variable speed control for freeway traffic is a nonlinear and time variable system, it is difficult to model with a mathematical model. A neural network control method is put forward.
针对高速公路可变速度控制是一个非线性时变系统,难于用数学模型准确建模这一特点,提出了神经网络控制方法。
In this paper, a new control system of an electro-hydraulic fuel injection advancer is presented and its dynamic mathematical model is developed.
本文提出了一种柴油机供油提前角电液调节系统,建立了动态数字模型。
应用推荐