A geometry based mathematical model is established for the calculation of reliability index by use of the fuzzy random reliability theory for slope stability analysis.
将模糊随机可靠度理论应用于边坡的稳定分析,建立了基于几何法计算广义可靠指标的数学模型。
On the basis of the model theoretical analysis and mathematical calculation are carried out.
在此模型的基础上进行了理论分析和数学计算。
Based on the wear law and reliability theory of the thrust bearing, the mathematical model of reliability life calculation on the wear of the thrust bearing is derived.
根据推力轴承磨损规律和可靠性理论,导出了推力轴承磨损的可靠寿命计算的数学模型。
The two procedures are compared at individual′s repetitivity, juror′s consistency, and correlation to results acquired by pair comparison method and by calculation with mathematical model.
分析比较了两种语义细分法在评价者的个体重复性、团组一致性以及与成对比较法和计算结果的相关性。
The mathematical model of wind turbine applied in the calculation takes account of characteristics of the blades, hub, gearbox, shaft and asynchronous generator.
计算中采用的风电场数学模型考虑了风电机组的叶片、轮毂、齿轮箱和连轴器以及异步发电机的特性。
Using the results from finite element analysis of turbine rotor suppressed in heat stress, and simplified theoretical calculation equations, a mathematical model is established.
采用汽轮机转子热应力的有限元分析结果和简化的理论计算公式,建立汽轮机转子热应力的数学分析模型。
The paper shows a mathematical model for hydraulic calculation and introduces testing and applying of such valve.
文中提供了水力计算数学模型,介绍了该阀的试验和使用情况。
The results of case calculations show that local models can shorten calculation time, raise the efficiency of mathematical model and heighten the accuracy of numerical calculations.
计算实例的结果表明,局部模型的使用既可以减少计算时间从而提高数学模型的效率,又可以提高局部海区潮流模拟的计算精度。
A mathematical model for calculation of bottom-hole flowing pressure of flowing Wells for oil field with non-solution gas drive is proposed.
对非溶解气驱油田提出了一个计算自喷井井底流动压力的统计数学模型。
The width and depth of laser transformation hardened layer was evaluated by establishing temperature field mathematical model and applying numerical calculation.
建立激光相变硬化过程的温度场数学模型,并应用数值计算预测了相变硬化带的形状和尺寸。
We have given the mathematical description of the modified model, and carried out a numerical calculation on both models.
给出了初始孔隙率非均匀模型的数学描述,并对改进前后的两种模型分别进行了数值计算。
According to production practice and theoretical calculation results by energy mathematical model, it is proved that the method is feasible.
根据生产实践并通过总的能量数学模型及模型应用的理论计算结果说明该方法是可行的。
By analyzing the coupling relationship between permeability and strain, a mathematical model and methods are deduced for calculation of fluid_solid interaction flow in fractured sandstone reservoir.
通过分析渗透率与应变之间的耦合关系,得到了裂缝性砂岩油藏流固耦合渗流计算的数学模型,并给出了计算方法。
By establishment of a mathematical model for water quality and quantity calculation, the impacts of tail water from the effluent plant of Baoying County on water environment are analyzed.
通过建立数学模型,进行水量水质计算,分析了宝应县污水处理厂尾水排放对水环境的影响。
The effect of major parameters of die structure on metal flow velocity is integrated and the mathematical model of design and calculation of aluminum profile extrusion die land length is derived.
并综合主要模具结构参数对金属流动速度的影响,建立了铝型材挤压模模孔工作带设计计算的数学模型。
Using finite element method, this article presents a mathematical model and computer program for the mechanical calculation of overhead transmission lines.
本文提出了用有限元法进行架空线机械计算的数学模型和计算程序。
Based on the mathematical model mentioned above, a software pigging is developed, which aims at pigging steady calculation after water pressure test.
根据数学模型和相应的数值计算方法,研制了水试压后输气管道的瞬态模拟分析软件Pigging。
A mathematical model for hydrodynamic calculation of the boiler circuitry is established.
本文建立了锅炉锅内水动力计算的数学模型。
The mathematical model on the calculation of recoiler dynamic torque(DT) and dynamic current(DC) are discussed. The calculation method on DT and DC by means of CAD is presented.
详细论述了卷取机动态力矩的数学模型及在控制系统中的实现问题,最后给出了采用CAD计算动态力矩和动态电流、确定相关工艺参数的方法。
Mathematical model of gas networks hydraulic calculation by node method is introduced, and hydraulic calculation is done by linear method.
介绍了采用燃气管网节点法水力计算的数学模型,运用线性化法进行水力计算。
The key to a successful calculation and prediction of welding process by mathematical model method is the selecting of an appropriate model and its parameters.
用数学模型方法进行焊接过程的计算和预测,关键是选取合适的计算模型和模型参数。
In the calculation, the mathematical model assumed by Winkler and its finite-difference solution are adopted.
计算采用文克尔假定的数学模型及其有限差分解。
The author develops a mathematical model which is necessary for technological calculation and draws up a simulated program of Claus sulfur recovery technology.
本文开发了工艺计算所必需的数学模型,并编制了克劳斯硫磺回收工艺模拟程序。
Based on a supposed mathematical model, the calculation of parameters of opening function of Eustachian tube was elaborated.
根据设想的数学模型,探讨了耳咽管开闭功能参数的计算方法。
And the mathematical model for the calculation of the technological process optimization was built through artificial neural net simulation of the technological analysis of the plastic part.
通过对塑件工艺分析的人工神经网络模拟,建立了可供工艺优化计算的数学模型。
The general reduced gradient method is used to find the solution of the mathematical model, and the calculation process is discussed.
采用广义简约梯度法求解此数学模型,探讨了其计算过程。
This paper introduces the comprehensive mathematical model of traverse calculation, simplifies the teaching content and provide the theoretical basis for programming.
本文提出导线计算的综合计算模型,精简了教学内容,并为通用程序的编制提供了根据。
The loss factors in liquid rocket turbine are analysed in detail and a related mathematical model and calculation method is proposed.
分析了液体火箭发动机中所用涡轮的各种损失因素,并建立了相应的数学模型,给出了计算方法。
The mathematical model is based on the calculation of geometrical figures by graphic method and the solution is obtained by successive approximation.
数学模型系以对图解法几何图形的解算为依据,并以逐步逼近计算法求解。
The mathematical model is based on the calculation of geometrical figures by graphic method and the solution is obtained by successive approximation.
数学模型系以对图解法几何图形的解算为依据,并以逐步逼近计算法求解。
应用推荐