The amplitude and gradient of MMMT signals not only relied on the average stress of the shell, but also relied on the local stress concentration.
由此证明磁记忆信号的幅度和梯度既与材料所处的整体应力有关，也与该部位的局部应力集中度有关。
The results show that the branch pile can reduce the deformation of the upper structure, but may cause local stress concentration in the superstructure.
研究结果表明，支盘桩可以有效降低上部结构的变形，但可能在上部结构产生局部应力集中。
The nonuniformity in filling ability of the material to different parts of die cavity leads to the unequal distribution of die stress and local stress concentration.
模具型腔各部分材料填允能力的不一致，是导致模具应力不均匀、局部出现应力集中的主要原因；
The fatigue life of different welding shapes between plates of unequal thickness in pressure vessel was investigated from the point of local stress concentration at welding position.
从焊接部位局部应力集中的角度分析了不等厚板在不同焊接形式下的疲劳寿命。
Thus, the stress concentration factor due to the misalignment should be considered in the analysis of fatigue life of the local structures.
因此，在对局部结构进行疲劳强度分析时，应考虑错位对于应力集中系数的影响。
The contact problems are non-linear problems, which relate to stress concentration, local boundary nonlinear, no-reversibility of shear force, and so on.
接触问题是非线性问题，涉及到应力集中、局部边界非线性、切向力的不可逆性等一系列非线性问题。
Through the analysis of the local strain concentration or stress concentration, together with the forming ability model, the occurrence and location of the crake can be predicted.
通过分析局部的应变集中或应力集中再加上金属变型能力模型，裂纹的发生和地点可以预见。
It is concluded that the local tensile stress created during quenching process and the stress concentration due to sharp V-shaped notch are the primary reasons of cracking.
认为，淬火过程中产生的局部拉应力加上尖锐V型槽口引起的应力集中是造成开裂的主要原因。
If the shear lag is too large, should take appropriate measures to prevent such stress concentration phenomena, and to prevent cracking or buckling due to local production caused structural damage.
如果剪力滞系数过大，则应采取相应的措施防止这种应力集中现象出现，防止因产生局部开裂或失稳而造成结构的破坏。
If the shear lag is too large, should take appropriate measures to prevent such stress concentration phenomena, and to prevent cracking or buckling due to local production caused structural damage.
如果剪力滞系数过大，则应采取相应的措施防止这种应力集中现象出现，防止因产生局部开裂或失稳而造成结构的破坏。
应用推荐