Plastic limit analysis is a physical nonlinear Problem.
塑性极限分析是物理非线性问题。
The plastic limit analysis is applied to the unstable fracture load.
对失稳断裂载荷进行了塑性极限分析。
This method has been used in computers for limit analysis of plane stress problems.
这种方法应用于平面应力问题的极限分析已在计算机上实现。
The typical methods are the limit equilibrium method, the limit analysis method and FEM.
较为典型的边坡分析方法主要有极限平衡法，极限分析法，有限元法等。
In AWGN channel, this paper gives the Shannon limit analysis of BFSK coherent detection.
本文还对BFSK信号相干检测在AWGN信道模型下的香农限进行了分析。
The plastic limit analysis of cylindrical reticulated shells has been studied in this paper.
本文探讨了圆柱形网壳结构的塑性极限分析。
Limit analysis of reinforced concrete developed as a result of earlier research on steel structures.
极限分析作为对钢结构早期研究成果开发的钢筋混凝土。
The upper bound limit analysis of the slope is numerically performed by element integration method(EIM) .
边坡稳定的上限分析在数值上是利用了单元集成法来完成的。
The problems encountered in theoretical limit analysis of columns with medium slenderness ratio are discussed.
文中论述了求解中长柱承载能力在理论上所遇到的若干困难。
The paper deals with the problem of limit analysis of structures of combined axisymmetrical thin shells of revolution.
本文研究旋转轴对称组合壳体结构的极限分析问题。
The third work of this paper is introducing the slope limit analysis program EMU into the analysis of slope monitor data.
本文的第三项工作是将边坡稳定极限分析程序emu引入边坡监测资料的分析中来。
In this paper, the method of asymptotc for structural limit analysis is proposed by the high limit theorem for limit load.
本文根据极限荷载的上限定理，提出了结构极限分析的递近法。
This paper deduces the new maximum height formula of loading on soft clay ground by the method of plasticity limit analysis.
对软土地基堆载极限高度进行了塑性极限分析，得出了计算公式。
The limit deepness of deep bore-hole with mud dado in the soils is calculated and analysed by adopting theory of limit analysis.
利用极限分析原理对土体中泥浆护壁深钻孔的极限孔深问题进行计算研究。
Some can get holomorphy solutions. In the course of plastic limit analysis, maybe there are the phenomena of producing yield-line.
在规则边界的薄板的塑性极限分析过程中，通常会有产生塑性铰线这一现象。
The three-dimensional limit analysis provides a simple and effective computing method for the lateral bearing capacity of rigid piles.
三维极限分析为计算刚性桩横向承载力提供了一种简便有效的方法。
By introducing the generalized method of cells (GMC) into plastic limit analysis, the bearing capacity of ductile composites is studied.
本文将细观力学中的单胞(GMC)模型运用到塑性力学的静力极限分析中，研究韧性复合材料的塑性极限承载能力。
By moans of limit analysis and numerical computation, ultimate bearing capacity and limit sideline of slopes are studied quantitatively.
通过极限平衡分析计算，定量地研究了缓倾角边坡坡顶极限承载力和陡倾角边坡坡面极限边界线。
The parametric variational principle may be used to finite element analysis as in plastic limit analysis and in elastic contact problems.
如同弹性接触问题及极限分析中那样，该原理可望用于有限元数值分析中。
The limit load calculation of welding piping tees under the action of the in plane bending moment was derived based on the limit analysis.
基于极限分析的观点，推导了工业中焊制三通在面内弯矩作用下的极限载荷估算式。
The plastic limit analysis and parametric design of a hollow cast steel roll with axle sleeve of the high-speed paper machine are studied.
研究了高速纸机中具有闷头的空心铸钢辊结构的塑性极限和参数设计问题。
This paper describes the limit analysis of latticed columns made from concrete-filled steel tubes under combined bending and axial loading.
本文用极限平衡法求解了钢管混凝土格构柱在轴力和弯矩共同作用下的极限承载能力。
As a simplified method for elastoplastic analysis, limit analysis method is more efficient and practical than the traditional increment method.
作为弹塑性求解问题的简化方法，极限分析比传统的弹塑性增量计算效率更高、更实用。
Limit analysis takes advantage of the lower-and upper-bound theorems of plasticity theory to provide bounds on the true solution of a stability.
极限分析理论采用塑性上、下限定理为稳定性的真解提供了限界。
Safety factors of slope stability analysis and limit bearing capacities of footings were solved by adopting lower bound theorem of limit analysis.
采用极限分析下限原理求解了岩土工程中基础的极限载力和边坡的安全系数。
The yield criterion of composite materials is simulated by using the homogenization method of micromechanics and the plastic limit analysis theory.
运用细观力学中的均匀化方法和塑性力学中的极限分析理论，分析了复合材料的屈服准则。
Advances an improving rigid nonlinearity hardening approximate model of the constitutive relations using the traditional theory of plastic limit analysis.
应用传统的极限分析理论，对可简化为刚塑性的材料本构关系提出了一种改进的“刚性-非线性强化”近似模型。
The present paper is concerned with a problem of limit analysis of thin cylindrical shell with closed ends and different thicknesses under internal pressure.
本文研究充内压端封闭异厚度薄圆柱壳的极限分析问题。
Based on the limit analysis viewpoint, a formula that could be used to estimate the in plane limit moment of welded branch pipe Tee was derived in this paper.
基于极限分析的观点，推导了工业中焊制管道三通在面内弯矩工况下的极限载荷估算式。
Based on the limit analysis viewpoint, a formula that could be used to estimate the out-of-plane limit moment of welded branch pipe tee was derived in this paper.
基于极限分析的观点，推导出面外弯矩作用下焊制三通的极限载荷估算公式。
应用推荐