The higher the power density, the less the heat diffusion.
功率密度越大，丝表面温度越高。
Plug in the power, medium heat diffusion can diffuse essential oils.
插上电源，中等热度就可以使精油扩散弥漫。
Moisture transfer caused by heat diffusion and a moisture content gradient could be neglected.
因热扩散、含水率梯度引起的水分迁移可以忽略不计。
The greater the vertical maximum gradient is, the more powerful its capability to block vertical heat diffusion from upper water layer to deep water layer.
温度垂直梯度越大，它在垂直方向上阻碍上层海水的热量往深层扩散的能力就越强。
The variation of air-sea heat fluxes have important influence on heat exchange between ocean and atmosphere, and greatly affects the heat diffusion of cooling in local area.
海—气热通量的变化对海—气的热量交换具有重要的影响，能够很大程度上影响局部海域温排水扩散情况。
The invention provides a semiconductor device which can increase heat diffusion efficiency generated by a plurality of semiconductor chips, and connects with a heat diffusion path reliably.
本发明提供一种半导体装置，提高了从多个半导体芯片产生的热的扩散效率，并可靠地与散热路径连接。
For instance, the maths it USES to describe how share prices move comes from the equations in physics that describe the diffusion of heat.
例如，其用以描述股价变动的数学方法来自物理学中描述热扩散(diffusion of heat)的一些等式[4]。
The mass transfer equation was introduced into heat transfer model of falling film evaporation. The radial velocity, mass diffusion coefficient and variation of film thickness were taken into account.
将传质方程引入到垂直管降膜蒸发传热模型中，求解时考虑了径向速度、质量扩散系数和膜厚变化对传热的影响。
It is one of the basic problems to study the heat conduction equation (the diffusion equation) using numerical method on unstructured grids.
在非结构化网格中，数值求解标量扩散方程(导热方程)是当今数值计算的基础问题。
Vacuum cooling is a complicated heat and mass transfer process supported by various theories such as diffusion, heat transfer, mass transfer and phase change.
真空冷却过程是复杂的相变传热传质过程，该过程涉及到扩散、传热、传质和相变等机理。
Heat equation is the most typical one of parabolical equations, which describes many physical-phenomenas, such as conduction, diffusion. Etc.
如描述热传导、扩散等物理现象的热传导方程就是最典型的抛物型方程。
The mixture ratio of C40 Marine high performance concrete is optimized through test of the hydration heat of binding material, slump, chloride ion diffusion coefficient, anti-crack rand of concrete.
通过测试胶凝材料水化热、混凝土的坍落度和氯离子扩散系数、抗裂等级等性能，对C40海工混凝土的配合比进行了优化设计。
Vacuum storage of food is a complicated heat and mass transfer process supported by various theories such as diffusion, heat transfer, mass transfer and phase change.
食品真空贮藏过程是复杂的传热传质过程，该过程涉及到扩散、传热、传质等机理。
With the increasing of mining depth and exothermic function and diffusion progress of every kinds of heat source and so on, the heat damage of mines is becoming serious.
随着矿井开采深度的增加，由于各种热源的放热作用、扩散过程和其它原因，矿井热害日趋严重。
The concept of heat decomposition was put forward. Heat to the external cooler consists of both convection heat and equivalent "diffusion heat".
提出了热量分解概念，外取热器热量由对流热和当量“扩散热”两部分组成。
An evaluation index, named temperature effectiveness based heat source, is proposed. And the inverse problem of hybrid temperature diffusion is discussed.
提出了适用于评价控制区域内最大温度的评价指标——基于热源的温度效率，并探讨了复合温度扩散反问题。
We regard the proliferation, the annihilating and the mutual reactions of the dislocations as chemical reactions, dislocations under action of heat activation will have properties of diffusion.
将位错的增殖、湮没与相互反应看作化学反应，位错在热激活作用下具有扩散性质。
A evaluation index, named temperature Effectiveness Based Heat Source, is proposed. And the inverse problem of hybrid temperature diffusion is discussed.
提出了适用于评价控制区域内最大温度的评价指标——基于热源的温度效率，并探讨了复合温度扩散反问题。
This paper discusses the source of heat for spot welding and the theory of diffusion welding of brass and red copper.
探讨了点焊热量的来源和黄铜与紫铜的扩散焊机理。
A method of surface metallization of diamond, temper powder diffusion heat treatment, was developed.
研究粉末扩散法使金刚石表面金属化的工艺。
When various manipulations disturb the thermal boundary layer inside or the condensate film and gas-vapor diffusion layer outside, the heat transfer effect will be better or be worse off.
各种操作条件只有影响到管程的温度边界层或壳程的冷凝液膜层和气-汽扩散层，才能强化或恶化传热过程。
At the same time, it also shows that the diffusion from cooling water is affected by both of tidal current and heat flux.
同时表明温排水扩散受到潮流运动和海—气热通量的影响。
In this article the analytical calculation has been made for the evaporator heat transfer in absorption-diffusion refrigeration system with the annular two-phase two-component heat transfer model.
本文采用双组分环状二相流模型对吸收-扩散式制冷系统蒸发器的传热进行了分析计算。
Effects of mass diffusion coefficient and heat loss on walls on flame shape are investigated.
研究了质量扩散和壁面散热对火焰形状形成的影响。
Removal of the heat resistive element (2) and the electrode (3) is prevented by suppressing the diffusion of the metal component from the electrode (3) to the heat resistive element (2).
通过抑 制上述金属成分从电极（3）向发热电阻器（2）的扩散，能够防止发热电阻器（2）及电极（3）的剥离。
Besides the influence of temperature on specific heat of mixture, considered is also that of diffusion flow due to concentration discrepancies, thus making the theoretical model more exact.
除考虑温度对混合气比热的影响外，还考虑了由于浓度差异产生的扩散流动对混合气比热的影响，从而使理论模型进一步精确化。
To obtain good diffusion of the heat without hot points, an annular layer of a neutral body can be used, which will not react with the refractory at the level of the injectors.
并取得良好的扩散热量，没有热点，环形层的一个中立机构，可用于将不发生反应，与耐火材料在这一级别的喷射器。
Test shows that the depth of residual compressive after chemical heat treatment is correspondent with that of diffusion layer.
试验表明，化学热处理后残余压应力的深度往往与渗层深度相一致。
Test shows that the depth of residual compressive after chemical heat treatment is correspondent with that of diffusion layer.
试验表明，化学热处理后残余压应力的深度往往与渗层深度相一致。
应用推荐