The process of feed gas reforming adopted in ammonia plant based on natural gas is directly rela-(ted) to cost and power consumption.
以天然气为原料造气生产合成氨，其生产工艺的选用直接影响着合成氨成本和能耗的高低。
A study is carried out on start-up and reduction, under a condition without hydrogen, of the catalyst for steam natural gas reforming to synthesis gas, which has turned out a success.
研究了天然气蒸汽转化制合成气催化剂在无氢条件下开车进行还原，取得成功。
It is important to note that in the reforming process, natural gas provides some of the hydrocarbons in the fuel.
有一个重要的地方得说明一下：在这一重整过程中，燃料中的碳氢化合物部分来自于天然气。
Today however, the most economical way to make hydrogen is by reforming fossil fuels such as natural gas—with the nearly same negative impact to the climate as direct combustion.
然而今天，制备氢气最经济的方法是通过重整如天然气之类的化石燃料，天然气直接燃烧对环境有同样的负面影响。
The recovery quantity of converter gas got increased in semisteel steelmaking process by means of optimizing oxygen feeding, improving operation level, reforming gas recovery system.
在半钢炼钢工艺下，通过优化转炉的供氧操作、提高操作水平、对煤气回收系统进行优化改造，提高了转炉煤气的回收量。
The numerical simulation of CO2 reforming with CH4 to synthesis gas was carried out under the condition of atmospheric abnormal glow discharge.
对大气压反常辉光放电条件下CH4 -CO2重整制合成气反应过程进行了数值模拟。
Combined with methanol's indirect use in power system, methanol and dimethyl-ether steam reforming use gas turbine exhaust gas to constitute the chemically recuperative gas turbine cycle.
结合甲醇在动力系统中间接应用方式的考虑，分析了甲醇和二甲醚利用燃气轮机排热蒸汽重整进行燃料改良组成化学回热燃气轮机循环的可行性；
This gas should be effectively utilized as preheated oxidant to steam methane reforming furnaces or to other large radiant-type process furnaces.
这种烟道气应有效地用作预热氧化剂，用于蒸汽甲烷重整锅炉或其他大型辐射型工艺锅炉。
According to the gas station environment, a conventional cooling pond is changed to a park landscape pond by reforming the circulating cooling process piping.
根据厂站环境情况，将普通冷却水池改造成园林景观水池，对循环冷却工艺管道做相应改造。
A hydrocracking catalyst named 3825 was developed to produce heavy naphtha for reforming feedstock from vacuum gas oil. This catalyst also has the flexibility to produce naphtha with jet fuels.
本文介绍了一种以减压馏分油为原料生产重整原料(重石脑油)为主并具有生产喷气燃料灵活性的轻油型3825加氢裂化催化剂。
Co-gasifying coal and natural gas is a new process bas Ed on methane steam reforming and coal gasification.
煤与天然气共气化是基于天然气蒸汽转化和煤气化工艺耦合的一种新工艺。
Traditional natural gas steam reforming for synthesis gas takes about 60 % of the total cost in natural gas indirect conversion utilization.
传统的天然气蒸汽重整制合成气在天然气间接转化利用过程中约占总费用的60%左右。
The composition and temperature of inlet and outlet gas at different reforming conditions were investigated by the model.
利用该模型研究了不同改质条件下进、出改质煤气成分、温度的相互关系。
Based on the properties of carbonaceous catalyst, composition of feed gas and the size parameters of reforming reactor, heat and material balance of reactor were established.
基于炭催化剂特性、原料气组成和重整转化反应器的尺寸参数，建立了重整反应器体系的物料平衡和热平衡方程；
The problems of low intensity and air leakage were solved through reforming the structure of gas duct.
通过对烟风道的结构改造解决了强度低、运行漏风的问题。
The reforming scheme of ranges is put forward after conversion into natural gas on the basis of reforming experiment of domestic LPG ranges.
在对家用LPG灶具进行改造试验的基础上，提出改用天然气后灶具的改造方案。
The simulation result can describe the temperature field and the distribution of volume fraction of mixed gas in methanol reforming reactor.
模拟结果可以直接表征反应器内的温度场、气体组分体积分数分布。
A new approach was presented for combining the medium-and-low temperature waste heat in sintered gas with methanol steam reforming to produce hydrogen.
提出了烧结机烟气中低温废热与甲醇蒸汽重整制氢整合的新方法，模拟建立了中低温废热结合甲醇重整制氢的系统。
By analysis of the process of gas reservoir forming, it is considered the process is classified into three phases: paleo-oil reservoir, large scale reservoir and paleo-gas reservoir reforming.
分析了气藏的形成过程，认为可划分为古油藏阶段、大气藏阶段、古气藏调整定型阶段等三个阶段。
There are three approaches to produce synthesis gas from methane, namely, reforming with H_2O (steam reforming), with CO_2 (CO_2 reforming), and partial oxidation.
甲烷重整制合成气有三条路径：水蒸气重整，二氧化碳重整和部分氧化。
The reaction of carbon dioxide reforming of methane to synthesis gas received significant attention in recent years, and the study on it has important academic and practical significance.
甲烷二氧化碳重整制取高附加值合成气的过程是近十几年来世界范围的研究热点之一，该过程的研究具有重要的理论和实际意义。
Latest technical progress in steam reforming process of natural gas is introduced.
介绍了天然气、蒸汽转化工艺技术的最新进展。
Hydrogen production from fossil fuel is the major processes in which steam reforming of natural gas is one of the most economic processes.
矿物燃料制氢是主要的制氢方法，其中以天然气蒸汽转化制氢的成本最低。
The feature of normal pressure intermittent cyclic catalytic reforming gas-making system, problems occurred in the commissioning and handling method were described in this paper.
介绍了常压间歇式循环催化改质制气装置的工艺特点、投产过程中出现的问题及处理方法。
According to the technological process of reforming technology through cyclic catalytic cracking of natural gas, the basic technological parameters are calculated.
根据天然气循环催化裂解改制技术的工艺过程，计算出基本的工艺参数，结合工程实际给出了实际生产参数。
But it is an energy consuming and resource wasting process. More than one fourth of the natural gas must be burned to generate heat for the steam reforming of the raw material.
但是，在天然气水蒸汽重整制合成气的过程中，需要消耗掉四分之一以上的天然气来供给反应热量，能量消耗大，造成资源的巨大浪费。
So, reforming the smoke capture system and developing a high efficiency gas-collecting hood technology suitable to large-scale aluminum reduction cell become more and more particularly urgent.
因此，对现有集气系统进行改造，并研究开发一种适合大型铝电解槽的高效集气排烟技术就显得尤为迫切。
So, reforming the smoke capture system and developing a high efficiency gas-collecting hood technology suitable to large-scale aluminum reduction cell become more and more particularly urgent.
因此，对现有集气系统进行改造，并研究开发一种适合大型铝电解槽的高效集气排烟技术就显得尤为迫切。
应用推荐